XTOOL InPlus IP500-BMR Car Diagnostic Tool User Manual

1. Úvod

The XTOOL InPlus IP500-BMR is a versatile automotive diagnostic tool specifically designed for BMW, MINI, and Rolls-Royce vehicles. It offers comprehensive OE-level full system diagnostics, advanced ECU coding, bi-directional control, and a wide range of special maintenance functions. This manual provides detailed instructions for setting up, operating, and maintaining your IP500-BMR device to ensure optimal performance and accurate vehicle diagnostics.

2. Bezpečnostní informace

Please read and understand all safety instructions before using the XTOOL InPlus IP500-BMR device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always operate the vehicle in a well-ventilated area.
• Používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle a rukavice.
• Nenoste volné oblečení ani šperky, které by se mohly zachytit o pohyblivé části.
• Keep the device away from water, oil, and other liquids.
• Před připojením nebo odpojením diagnostického přístroje se ujistěte, že je vypnuté zapalování vozidla.
• Avoid touching hot engine components or exhaust systems.
• Nepokoušejte se zařízení rozebírat nebo upravovat.
• Používejte pouze dodané kabely a příslušenství.
• Udržujte děti a nepovolané osoby mimo pracovní oblast.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x IP500 Tablet
• 1 x Diagnostic Main Line (OBDII Main Cable)
• 1 x nabíjecí kabel USB typu C
• 1 x Quick Boot Guide (User Manual)
• 1 x přepravní pouzdro

4. Specifikace

5. Nastavení

5.1 Device Activation and Registration

1. Power on the IP500-BMR device.
2. Follow the on-screen prompts to register and activate the device using your email address and the product's serial number.
3. Ensure a stable internet connection (Wi-Fi 2.5 & 5GHz supported) for activation and updates.

5.2 Připojení k vozidlu

1. Vyhledejte port OBD-II ve vozidle, obvykle pod palubní deskou na straně řidiče.
2. Ujistěte se, že je zapalování vozidla VYPNUTÉ.
3. Connect the Diagnostic Main Line (OBDII Main Cable) to the IP500-BMR device.
4. Connect the other end of the Diagnostic Main Line to the vehicle's OBD-II port.
5. Otočte zapalování vozidla do polohy „ON“ (vypnutý motor).

5.3 Nastavení jazyka

The default language is English. To change the language:

1. After activating the device, contact the seller with your device's serial number to authorize the desired language.
2. Navigate to 'Settings' on the device.
3. Vyberte možnost „Jazyk“ a zvolte ze seznamu preferovaný jazyk.
4. Click 'Update Device' to apply the language change and download necessary language packs.

5.4 Aktualizace softwaru

The XTOOL InPlus IP500-BMR offers lifetime free updates for all functions. Regular updates ensure compatibility with the latest vehicle models and provide new features.

1. Ujistěte se, že je zařízení připojeno ke stabilní síti Wi-Fi.
2. On the main menu, tap 'Updates'.
3. The device will check for available updates. Follow the on-screen instructions to download and install any new software versions.

6. Návod k obsluze

6.1 Obecná navigace

The IP500-BMR features a 5.45-inch touch screen for intuitive navigation. The main menu typically includes options like 'Auto Scan', 'Diagnosis', 'OBD II', 'Special Functions', 'Updates', and 'More'.

6.2 Úplná diagnostika systému

This function allows you to access and scan all available vehicle modules (e.g., Engine, Transmission, ABS, Airbag, Brakes, Body, Chassis, HVAC) to:

• Přečtěte si informace o ECU
• Read Trouble Codes (DTCs)
• Vymazat chybové kódy
• Read Frozen Frame data
• View Live Data (e.g., engine rpm, misfire, coolant temp, ABS wheel speed sensor, transmission fluid temperature)

6.3 Advanced ECU Coding for BMW/MINI/Rolls-Royce

ECU Coding allows for re-flashing vehicle control modules, updating software, or reprogramming components. This can address issues like drivability, fuel efficiency, power loss, and fault codes.

• Enable or Disable Specific Functions: Activate features like seat heating, automatic headlights, or disable start/stop systems.
• Adapting Replaced or Upgraded Parts: Ensure new hardware is compatible and functions correctly.
• Regional and Market Adjustment: Adjust vehicle configurations for different regions (e.g., instrument language, temperature unit, navigation system).
• Optimize Driving Experience: Fine-tune throttle response or automatic transmission shifting conditions.
• Odstraňování problémů a údržba: Clear non-critical fault codes, restore factory settings, or recalibrate systems.
• Safety and Comfort Settings: Customize ADAS sensitivity, automatic door locking speed, turn signal flashes, welcome light settings.

Note: ECU Coding is not available for all vehicles. Please check compatibility with your VIN before attempting.

6.4 Bi-directional Control / Active Test

This function allows the scanner to send commands to vehicle ECUs to perform various active tests, helping to precisely locate problems and save diagnostic time.

• ExampPočet aktivních testů: Injector Tests, Fuel Injector Balance, Compression Test, Cooling Fan, A/C Clutch On/Off, ABS Motor Pump, Windows/Wipers/Sunroof/Doors.
• Výhody: Precisely locate problems, save time and cost, enable real-time adjustments and repairs.

Note: Available active tests vary by vehicle system.

6.5 23+ Special Maintenance Services

The IP500-BMR supports over 23 special functions for routine maintenance and service resets:

• Reset kontrolky oleje: Reset the oil life system and turn off the oil light.
• EPB (elektronická parkovací brzda): Reset the brake pad after repairs.
• Kalibrace SAS (snímač úhlu řízení): Perform calibration and clear fault records.
• BMS (Battery Management System): Re-match control module and motoring sensor for accurate battery detection.
• Kódování vstřikovačů: Write or rewrite fuel injection nozzle codes after replacement.
• A/C Relearn: Reset compressor operation data and servo motor position for AC system diagnosis.
• Other Supported Functions: Gearbox Match, Suspension, Language Change, Transport Mode, Window Initialization, Seat Calibration, Headlight Adjustment, Start/Stop Reset, Nox Reset, SRS, A/F Settings, DPF, Throttle Relearn, ABS Bleeding, EGR Relearn, Rain/Light Sensor, Clutch Adaptation, and more.

Note: Please provide your specific car model and VIN number to check compatibility before purchasing.

6.6 Full 10 OBD2 Functions (for All Cars)

The IP500-BMR supports all 10 modes of OBD2 tests for general vehicle diagnostics, not limited to BMW/MINI/Rolls-Royce:

1. Čtení chybových kódů
2. Vymazat chybové kódy
3. Živá data
4. Přečtěte si Zmrazit snímek
5. Přečtěte si informace o ECU
6. Test součásti
7. Test palubního monitoru
8. Test monitorování senzoru O2
9. Připravenost I/M
10. Přečtěte si informace o vozidle

6.7 Automatické VIN a automatické skenování

Automatically identifies the vehicle's VIN (Vehicle Identification Number) to quickly read basic vehicle information, simplifying the diagnostic process and improving accuracy.

6.8 4-in-1 Live Data Graph

Graphically displays up to four different real-time data streams simultaneously on one screen. This allows for easy monitoring and analysis of data from multiple sensors or systems (e.g., engine rpm, vehicle speed, accelerator position, fuel injection volume). Data streams can be exported as CSV files for storage and comparison.

6.9 Sdílení a tisk diagnostické zprávy

Generate detailed diagnostic reports including fault codes, system status, and test results. Reports can be shared or printed, aiding in record-keeping and communication with other technicians or vehicle owners.

6.10 DTC Look-Up Library

Provides a database for vehicle trouble codes (DTCs). Enter a fault code to get a description, possible causes, and recommended fixes, shortening diagnosis time.

6.11 Objem autobaterietage Test

Measures the battery's quiescent voltage a svtage at engine start to assess battery health, providing suggestions for maintenance or replacement.

7. Supported Vehicles

The XTOOL InPlus IP500-BMR is specifically designed for BMW, MINI, and Rolls-Royce vehicles, covering a wide range of models worldwide.

7.1 BMW Vehicles

• Řada 1: E81, E82, E87, E88, F20, F21, F40, F52, F70, E81.
• Řada 2: F22, F23, F44, F45, F46, F87, G42, U06, G87.
• Řada 3: E30, E36, E46, E90, E91, E92, E93, F30/31, F34/35, F80, G20, G21, G28, G80, G81.
• Řada 4: F32, F33, F36, F82, F83, G22, G23, G26, G82, G83.
• Řada 5: E34, E39, E60, E61, F07, F10, F11, F90, G30, G31, G38, G60, G61, G68, G90.
• Řada 6: E63, E64, F06, F12, F13, G32.
• Řada 7: E32, E38, E65, E66, E67, E68, F01, F02, F03, F04, G11, G12, G70, G73.
• Řada 8: E31, F91, F92, F93, G14, G15, G16.
• I Series: I01, I12, I15, I20.
• Řada X: E53, E70, E71, E72, E83, E84, F15, F16, F25, F26, F39, F48, F49, F85, F86, F95, F96, 97, F98, G01, G02, G05, G06, G07, G08, G09, G18, G45, M12, M13, U10, U11, U12.
• Řada Z: E30, E36, E52, E85, E86, E89, G29.

7.2 MINI Vehicles

• F54, F55, F56, F57, F60, F65, F66, J01, J05, R50, R52, R53, R55, R56, R57, R58, R59, R60, R61, U25.

7.3 Rolls-Royce Vehicles

• RR1, RR11, RR12, RR2, RR21, RR22, RR25, RR3, RR31, RR4, RR5, RR6.

8. Údržba

8.1 Aktualizace softwaru

Regularly check for and install software updates to ensure your device has the latest features, bug fixes, and vehicle compatibility. Connect to Wi-Fi and use the 'Updates' function on the main menu.

8.2 Péče o zařízení

• Udržujte zařízení čisté a bez prachu a nečistot. K čištění používejte měkký, suchý hadřík.
• Nevystavujte zařízení extrémním teplotám nebo přímému slunečnímu záření.
• Store the device in its protective carry case when not in use.
• Do not use harsh chemicals or abrasive cleaners on the screen or casing.
• Ensure the charging cable and diagnostic cable are not damaged.

9. Řešení problémů

9.1 Běžné problémy a řešení

10. Uživatelské tipy

• Změna jazyka: Remember that English is the default language. If you require a different language, you must contact the seller with your device's serial number *before* attempting to change it in the settings.
• Kompatibilita vozidla: Always verify the compatibility of specific functions (like ECU Coding or Active Tests) with your car's brand, model, year, and VIN before purchasing or attempting the function. You can use the XTOOL Official Website's function query tool for this.
• Doživotní bezplatné aktualizace: Vezměte si náskoktage of the lifetime free updates to keep your device current with the latest vehicle models and diagnostic capabilities. Regularly check for updates via Wi-Fi.
• Diagnostické zprávy: Utilize the diagnostic report feature to save and share detailed information about your vehicle's health. This can be very helpful for tracking issues over time or consulting with other mechanics.

11. Záruka a podpora

11.1 Záruka

The XTOOL InPlus IP500-BMR comes with a 2-year warranty.

11.2 Technická podpora

XTOOL provides 24-hour online service and professional technical support. For any questions or assistance, please refer to the XTOOL Official Webwebu nebo se přímo obraťte na jejich tým podpory.

• XTOOL Official Webmísto: https://www.xtooltech.com/english/FunctionQuery.html
• Kontaktování podpory: Refer to the contact information provided with your product or on the official webstránky pro přímé kanály podpory.