1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of the JH-01 Meter Dashboard LCD Display and the 36V 19A Brushless Controller. This system is designed to provide efficient and reliable control for electric scooters and e-bikes, ensuring steady speed, sensitive braking, and precise direction changes.
The controller is constructed from high-intensity aluminum alloy, making it shock-resistant and durable. Its intelligent design facilitates effective heat dissipation, protecting internal circuits. The display unit is made from high-quality plastic, offering high strength and ease of installation.
2. Obsah balení
Ověřte prosím, zda jsou ve vašem balení obsaženy všechny níže uvedené položky:
- 1x 36V 19A Brushless Motor Controller
- 1x JH-01 LCD Display Unit (with 6-pin connector)
- 1x Display Connection Cable
- Assorted Wiring Harnesses for Controller (power, motor phase, accessories)
3. Specifikace
Ovladač motoru
| Funkce | Popis |
|---|---|
| Materiál | High-intensity Aluminum Alloy |
| svtage | 36V |
| Proud | 19A |
| Typ motoru | Brushless (without Hall sensor support) |
| Rozměry (D x Š x V) | 90.5 mm x 52.5 mm x 29.5 mm |
| Ochrana | Shock-resistant, effective heat dissipation |
JH-01 LCD Display Unit
| Funkce | Popis |
|---|---|
| Materiál | Vysoce kvalitní plast |
| Typ konektoru | 6pinový |
| Vlastnosti | High strength, durable, compact, lightweight |
Informace o balíčku
| Dimenze | Hodnota |
|---|---|
| Délka | 17 cm |
| Šířka | 15 cm |
| Výška | 6 cm |
| Hmotnost | 0.122 kg |
4. Bezpečnostní informace
- Always disconnect power from the electric scooter/e-bike before attempting any installation, maintenance, or repair.
- Ujistěte se, že všechna připojení jsou bezpečná a řádně izolovaná, aby se zabránilo zkratu.
- This product is intended for use with 36V systems. Using it with incompatible voltage může způsobit poškození.
- Professional installation is recommended if you are unfamiliar with electrical systems.
- Ensure the instrument display and controller are compatible with your specific motor model. Incompatible models may not function correctly.
- Keep the controller and display unit away from water and excessive moisture to prevent damage.
5. Instalační příručka
Before beginning installation, ensure the vehicle's power is completely off and the battery is disconnected.
5.1 Instalace ovladače
- Select a suitable location for the controller, preferably in a protected area with good airflow to aid in heat dissipation.
- Securely mount the controller using appropriate fasteners.
- Connect the main power cables (typically a yellow XT60 connector for battery input) to your battery.
- Connect the three thick motor phase wires (blue, green, yellow) from the controller to the corresponding motor wires.
- Connect any additional accessory wires such as throttle, brake levers, and other sensors as required by your e-bike/scooter system. Refer to the general wiring diagram below for common connections.
5.2 Display Unit Installation
- Mount the JH-01 LCD Display Unit onto your handlebar using the integrated clamp. Ensure it is positioned for easy viewing and access to buttons.
- Connect the 6-pin connector cable from the display unit to the corresponding port on the brushless motor controller.
5.3 General Wiring Connections
While a specific wiring diagram is not provided, typical connections for a brushless controller and display unit include:
- Napájení baterie: Connect the main power wires (often red/black, with a high-current connector like XT60) to your battery.
- Fázové vodiče motoru: Connect the three thick wires (blue, green, yellow) to the corresponding motor phase wires.
- Displejová jednotka: Connect the 6-pin cable from the JH-01 display to the dedicated display port on the controller.
- Škrticí klapka: Connect the throttle signal wire (usually green or white), power (red), and ground (black) to the throttle input on the controller.
- Brzdové páky: Connect brake lever cut-off switches (if present) to the controller. This system supports electronic braking.
- Další příslušenství: Connect any other accessories such as lights or horn to their respective ports on the controller, if available.
6. Návod k obsluze
6.1 Zapnutí/vypnutí
- To power on the system, press and hold the Tlačítko napájení (
) on the JH-01 display unit for a few seconds until the screen illuminates. - Chcete-li přístroj vypnout, stiskněte a podržte tlačítko Tlačítko napájení znovu, dokud displej nezhasne.
6.2 Funkce displeje
The JH-01 LCD display provides essential information about your ride:
- Rychlost: Aktuální rychlost jízdy.
- Úroveň baterie: Indikace zbývajícího nabití baterie.
- režim: Current riding mode or power assist level.
- Další údaje: May include trip distance, total distance, error codes, etc., depending on the specific display firmware.
6.3 Výběr režimu
Použijte tlačítko MODE on the display unit to:
- Cycle through different display information (e.g., ODO, TRIP, VoltagE).
- Adjust power assist levels (if applicable to your system).
- Access basic settings (refer to specific display instructions if available for advanced settings).
7. Údržba
- Čištění: Keep the controller and display unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
- Spojení: Pravidelně kontrolujte všechna elektrická připojení, abyste se ujistili, že jsou bezpečná a bez koroze.
- Fyzická kontrola: Inspect the controller and display for any signs of physical damage, such as cracks, dents, or frayed wires. Address any damage promptly.
- Ochrana životního prostředí: While the controller is durable, avoid prolonged exposure to extreme temperatures, direct sunlight, or heavy rain.
8. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Systém se nezapne | Disconnected battery, low battery charge, faulty power button, loose display connection. | Check battery connection and charge level. Ensure the 6-pin display cable is securely connected. Try pressing the power button firmly. |
| Motor nereaguje | Loose motor phase wires, faulty throttle, controller issue. | Verify all three motor phase wires are securely connected. Check throttle connection. Ensure the controller is receiving power. Note: This controller is designed for sensorless motors. |
| Displej nezobrazuje informace | Loose 6-pin display connection, display unit fault. | Ensure the 6-pin cable connecting the display to the controller is firmly seated. |
| Electronic brake not working | Brake lever sensor disconnected or faulty, controller issue. | Check connections from brake levers to the controller. Ensure brake levers are functioning correctly. |
9. Uživatelské tipy
- Kontrola kompatibility: Always ensure that the JH-01 display and the 36V 19A controller are compatible with your specific electric scooter or e-bike model before installation. Using mismatched components can lead to malfunction.
- Sensorless Operation: This controller is designed for motors without Hall sensors. If your motor has Hall sensors, ensure it can operate in sensorless mode or consider a different controller.
- Waterproofing Connections: For outdoor use, consider adding extra waterproofing (e.g., electrical tape or sealant) to exposed wire connections to protect against moisture ingress.
- Správa kabelů: Route all cables neatly and secure them to prevent snagging or damage during operation.
10. Záruka a podpora
For any technical assistance, warranty claims, or further inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty purposes.
