1. Konec produktuview
The DATOUBOSS Pure Sine Wave Inverter converts DC power from batteries (12V, 24V, 36V, 48V, or 60V) into stable AC power (220V/230V/240V) suitable for a wide range of household and outdoor appliances. It features a continuous power output of 2000W and a peak power of 4000W, ensuring reliable operation for various electrical loads. This inverter is designed for use in homes, boats, cars, and RVs.
Klíčové vlastnosti:
- Výstup čisté sinusové vlny: Provides clean power identical to grid electricity, safe for sensitive electronics.
- Vysoká účinnost konverze: Účinnost až 90 %, minimalizuje ztráty energie a prodlužuje životnost baterie.
- Komplexní ochrana: Zahrnuje přes objtage, nízký objemtage, high temperature, overload, and short circuit protection.
- Odolná konstrukce: Aluminum-magnesium alloy body with dual air ducts and high-quality heat sinks for effective cooling.
- Uživatelsky přívětivý displej: Multi-function LCD shows input/output voltage, frequency, power, battery level, and fault codes.
- Pohodlné nabíjení: Equipped with USB and Type-C QC3.0 5V2.1A ports for charging mobile devices.
- Dálkové ovládání: Supports remote control for convenient power on/off.
Obsah balení:
- 1 x Měnič s čistou sinusovou vlnou
- 1 x Bluetooth dálkové ovládání
- 1 x 100A Positive And Negative Cable
- 1 x CE Certification
- 1 x Uživatelská příručka (tento dokument)
Note: The internal structure of the DN-03 series inverters may vary depending on the input voltage and product iterations. The weight of 12V and 24V configurations is approximately 3.5kg, while 36V and above configurations are approximately 5kg.
2. Nastavení a instalace
2.1 Požadavky na prostředí:
- Ensure the installation environment is dry, clean, and well-ventilated.
- Rozsah provozních teplot: -20°C až 80°C.
- Do not cover the inverter to allow for proper heat dissipation.
2.2 Component Identification:
Refer to the image above for the location of the following components:
- AC zásuvky: Pro připojení spotřebičů se střídavým proudem.
- Přepínače: Power on/off switch for AC output.
- Heat Sink & Cooling Fans: Pro tepelnou regulaci.
- Ground Line: Pro bezpečnostní uzemnění.
- Positive & Negative Extremes (Electrodes): For battery connection.
- Type-C & USB Ports: Pro nabíjení externích zařízení.
- LCD displej: Shows operational status and fault codes.
2.3 Připojení baterie:
It is crucial to connect the inverter to a battery with a matching voltage. Using an incorrect input voltage will prevent the inverter from working and may cause damage.
- Jedna baterie: For a single battery, ensure its voltage (např. 12V) odpovídá vstupnímu napětí měničetage.
- Více baterií: For multiple batteries, they can be connected in series or parallel to achieve the desired voltage a kapacita.
- Autobaterie: Typicky 12 V.
- Baterie pro nákladní automobil: Typicky 24 V.
Always use the original connection cables provided. Ensure correct polarity when connecting the positive and negative terminals.
Example Battery Configurations:
2.4 Solar Conversion Wiring Diagram:
The inverter can be integrated into a solar power system. The diagram below illustrates a typical setup.
3. Návod k obsluze
3.1 Zapnutí/vypnutí:
- Connect the inverter to a compatible battery using the provided cables, ensuring correct polarity.
- Press the power button on the inverter or use the remote control to turn it on. The LCD display will illuminate.
- To turn off, press the power button again or use the remote control.
Watch this video for a demonstration of powering on the inverter and using the remote control:
Video demonstrating the inverter's power-on sequence, remote control functionality, and charging capabilities for a smartphone and a heater.
3.2 Informace na LCD displeji:
The LCD display provides real-time operational data:
- Vstupní objemtage: Zobrazuje hlasitost stejnosměrného proudutage z baterie.
- Výstupní objemtage: Zobrazuje výstupní hlasitost střídavého proudutage.
- Frekvence: Indicates the output frequency (e.g., 50Hz).
- Moc: Displays the current power consumption in kW.
- Úroveň baterie: Graphical representation of battery charge.
- Fault Codes (F1-F5): Indicates specific protection triggers.
3.3 Connecting Appliances:
Once the inverter is powered on, you can connect your AC appliances to the AC outlets and USB/Type-C devices to the respective charging ports.
The pure sine wave output ensures compatibility with almost all electrical appliances, including sensitive inductive loads like refrigerators and washing machines.
4. Bezpečnostní a ochranné prvky
The inverter is equipped with multiple protection mechanisms to ensure safe operation and protect both the inverter and connected appliances.
- F1: Over Voltage ochrana: Automatically shuts down if input voltage exceeds safe limits (e.g., 15V±4% for 12V model).
- F2: Low Voltage ochrana: Automatically shuts down if input voltage drops below safe limits (e.g., 10V±4% for 12V model).
- F3: High Temperature Protection: If the internal temperature exceeds 85°C, the AC output is turned off, and an alarm sounds. Operation resumes when temperature drops below 75°C.
- F4: Overload Protection: If the load exceeds 110%-130% for 15 seconds, or 130%-150% for 5 seconds, or 150% instantly, the AC output is turned off. A reset switch restores operation.
- F5: Short Circuit Protection: Shuts down the device within 2 seconds in case of a short circuit. A reset switch is required to recover.
- Input Reversal Protection: Protects against incorrect battery polarity by blowing an internal fuse.
When a protection function is triggered, the inverter will immediately turn off power, and the buzzer will sound to alert the user.
5. Údržba
- Keep the inverter in a dry, clean, and well-ventilated area.
- Ensure the inverter's ventilation openings are not obstructed to allow for proper cooling.
- Regularly check battery terminals for corrosion and clean them with a dry cloth if necessary.
- If the inverter overheats, allow it to cool down in a ventilated area before resuming operation.
6. Řešení problémů
Běžné problémy a řešení:
- Inverter does not respond, screen does not light up, indicator light does not light up, no sound on:
- Check if the battery and inverter are connected properly. Reconnect them if loose.
- Verify battery polarity. If poles are reversed, the internal fuse may be blown. Replace the fuse if needed.
- Nízký objemtagElarm:
- The battery may be discharged. Recharge or replace the battery.
- Check for poor contact at the battery terminals. Clean terminals with a dry cloth if necessary.
- Žádný výstup z měniče:
- Baterie voltage je příliš nízké. Nabijte nebo vyměňte baterii.
- The load current is too high. Turn off some of the connected loads and restart the inverter.
- Inverter over temperature protection. Let the inverter cool down for a period of time in a ventilated place.
- Inverter failed to start. Restart it.
- Inverter terminals, blown fuse. Replace the fuse.
7. Specifikace
| Parametr | DN2000W12V | DN2000W24V | DN2000W36V | DN2000W48V | DN2000W60V |
|---|---|---|---|---|---|
| Výkon | 2000W | 2000W | 2000W | 2000W | 2000W |
| Maximální výkon | 2200W | 2200W | 2200W | 2200W | 2200W |
| Špičkový výkon | 4400W | 4400W | 4400W | 4400W | 4400W |
| Výstup AC voltage přesnost | ±10V | ±10V | ±10V | ±10V | ±10V |
| Účinnost konverze | 82 % | 90 % | 90 % | 90 % | 90 % |
| Frekvence | 50Hz/60Hz | 50Hz/60Hz | 50Hz/60Hz | 50Hz/60Hz | 50Hz/60Hz |
| Výstupní objemtage | 110/240V | 110/240V | 110/240V | 110/240V | 110/240V |
| svtage rozsah | 10-15V | 20-30V | 30-45V | 34-54V | 36-72V |
| Výkon naprázdno | ≤25W | ≤25W | ≤25W | ≤25W | ≤25W |
| Ochrana proti přehřátí | > 85 °C | > 85 °C | > 85 °C | > 85 °C | > 85 °C |
| Ochrana proti přetlaku | 15V±0.3V | 30V±0.3V | 45V±0.3V | 60V±0.3V | 75V±0.3V |
| Ochrana proti nízkému tlaku | 10V±0.3V | 20V±0.3V | 31V±0.3V | 40V±0.3V | 50V±0.3V |
| Automatic Low pressure recovery | 12.6V±0.5V | 25V±0.5V | 37V±0.3V | 50V±0.5V | 62.5V±0.5V |
| Automatic Overpressure recovery | 14V±0.5V | 28V±0.5V | 42V±0.3V | 56V±0.5V | 70V±0.5V |
| Nabíjení USB/Type-C | TYPE-C; QC3.0; 5V2.1A | TYPE-C; QC3.0; 5V2.1A | TYPE-C; QC3.0; 5V2.1A | TYPE-C; QC3.0; 5V2.1A | TYPE-C; QC3.0; 5V2.1A |
| Size MM (L*W*H) | 390*178*93 | 390*178*93 | 390*178*93 | 390*178*93 | 390*178*93 |
Note: The table above provides detailed specifications for different input voltage models of the 2000W inverter.
8. Uživatelské tipy
- Trvalý vs. špičkový výkon: When selecting an inverter, always consider the nepřetržitý výkon (2000W for this model) as this is the power it can sustain for extended periods. Peak power (4000W) is only available for brief moments during appliance startup.
- svtage Shoda: Ensure the inverter's input voltage (12V, 24V, 36V, 48V, or 60V) precisely matches your battery system's voltagE. Nesprávný svtage will prevent operation and could damage the unit.
- Správa zatížení: Avoid consistently running the inverter at its maximum continuous power for prolonged periods to extend its lifespan. If the load current is too high, reduce the number of connected appliances.
- Větrání je klíčové: Always ensure adequate airflow around the inverter. Do not cover it, as proper ventilation is critical for heat dissipation and preventing overheating.
- Kvalita kabelu: Always use the original or high-quality, appropriately gauged cables for battery connections to minimize resistance and ensure efficient power transfer.
9. Záruka a podpora
For any questions or issues regarding your DATOUBOSS Pure Sine Wave Inverter, please contact customer support using the information below. A detailed user manual in PDF format is also available for download.
- Webmísto: www.xdatou.com
- Telefon/WeChat/Whatsapp/LINKA: +8615136142329 XNUMX XNUMX XNUMX
- E-mail: Manager@xdatou.com
- Uživatelská příručka (PDF): A comprehensive user manual is available for download. Please refer to the product page or contact support for the direct link.
