Příručky+

Scimagic-RC SMG-233

Scimagic-RC SMG-233 Universal Garage Door Remote Control

Model: SMG-233 | Brand: Scimagic-RC

Zavedení

The Scimagic-RC SMG-233 is a versatile multi-frequency remote control designed for universal compatibility with a wide range of garage door and gate systems. Featuring support for both rolling code and fixed code systems across frequencies from 280MHz to 868MHz, this device can clone up to four different remote controls, offering a convenient all-in-one solution for your access needs.

Scimagic-RC SMG-233 Universal Remote Control
The Scimagic-RC SMG-233 Universal Remote Control.
Applications of the universal remote control
The remote control is suitable for various applications including garage doors, gates, barriers, sliding gates, and swing gates.

Specifikace

Funkce Detail
Materiál produktu ABS, Metal and PVC
Velikost produktu 63 mm * 37 mm * 12 mm
Hmotnost produktu 35 g
Barva produktu Černý
Jmenovitý objemtage 3V (baterie CR2032 je součástí balení)
Instalace Bezdrátový
Metoda kódování Rolling code and Fixed Code
Kanály 4
Learning Frequency Range 280MHz to 868MHz (e.g., 300, 315, 390, 433.42, 433.92, 868.35 MHz)
Dosah rádiového přenosu 30-100m (Open area)
Rozsah aplikace Garage door, alarm, automatic door, rolling door, etc.
Osvědčení CE
Multi-frequency remote control duplicator diagram
The remote supports multiple frequencies from 287MHz to 868MHz.
Internal V15.0 chip of the remote control
Equipped with the NEW V15.0 chip for enhanced performance.

Obsah balení

  • 1x Scimagic-RC SMG-233 Remote Control
  • 1x Remote Control Chain
  • 1x anglický manuál
Remote control with keychain
The remote control comes with a convenient keychain.

Setup and Cloning Instructions

This remote control is designed for easy cloning of existing remote signals. Follow these steps carefully:

  1. Vymazat existující kódy:

    Press and hold Button 1 and Button 2 simultaneously. Release Button 2, then press Button 2 again 4 times. Continue this sequence until the LED on the new remote control flashes once every three seconds. This indicates that the remote's memory has been cleared.

    Step 1: Clearing existing codes on the remote
    Clearing existing codes on the new remote.

  2. Position Remotes for Cloning:

    Place your original remote control directly in front of the new Scimagic-RC remote control, approximately 4 to 5 cm apart. Ensure a clear line of sight between the two devices.

    Step 2: Positioning original and new remotes for cloning
    Proper positioning of remotes for cloning.

  3. Copy the Code:

    Press and hold the button on your original remote control that you wish to copy. Simultaneously, press and hold the corresponding button on the new Scimagic-RC remote control. Continue holding both buttons until the LED on the new remote control flashes quickly and regularly. This indicates successful code capture.

    Step 3: Copying the code from the original remote
    Copying the signal from the original remote to the new remote.

  4. Assign to New Remote Button:

    Once the LED on the new remote flashes quickly, release both buttons. The code is now stored on the new remote's selected button.

    Step 4: Assigning the copied code to a button
    Assigning the copied code to a button on the new remote.

  5. Opakujte pro další tlačítka:

    If you need to copy more buttons, repeat steps 1-4 for each desired button. If cloning is unsuccessful, repeat the entire process from step 1.

    Step 5: Repeating the cloning process if unsuccessful
    Repeat the process if cloning is not successful.

  6. Programming Rolling Code Remotes with Receiver:

    For rolling code remote controls, an additional programming step with the receiver is required after cloning. Turn on the motor of your garage door or gate system to locate the receiver's programming buttons. Press the programming button on the receiver, then press and hold the cloned button on your new Scimagic-RC remote control for a period of time until its LED flashes quickly or the receiver indicates successful pairing (refer to your receiver's manual for specific indicators).

    Step 6: Programming rolling code remote with receiver
    Programming rolling code remotes with the receiver.

Video demonstration of the cloning process for the universal remote control.

Návod k obsluze

Once successfully programmed, operate the Scimagic-RC SMG-233 remote control as you would your original remote:

  • Press the programmed button to activate your garage door, gate, or other compatible device.
  • Ensure you are within the effective radio transmission distance (30-100m in open areas) for optimal performance.
  • The LED indicator on the remote will illuminate when a button is pressed, confirming signal transmission.
Remote control in hand, showing effective range
The remote control offers a range of 30-100m in open areas.

Kompatibilita

The Scimagic-RC SMG-233 is compatible with a wide range of remote control brands. Below is a list of examples. If your brand is not listed or you are unsure, please contact customer support with a photo of your original remote control for verification.

Example Compatible Brands:

  • ACM (TX2, TX2 COLOR, TX4)
  • ADYX (TE4433H BLUE, 433-HG BRAVO, ALIZE EM2C, ALIZE EM4C)
  • AERF (COMPACT, HY-DOM, MERCURIB, MERCURI C, SABUTON, MARS, SATURN, ST3/N, TERRA, TMP-1, TMP-2, UNITECH)
  • ALLMATIC (BROWN, BROWN RED, BRO.OVER, PASS, MINIFASS)
  • APERTO (TXQ2-434-2, TX02-868-2 BLUE, 4025 TX02-868-2, 4022 TX02-434-2, 4020 TX03-434, TX-D3-868-4, 4013, TX03-434-4)
  • APRIMATIC (APRIMATIC TR2, TR4, TM4)
  • ATA (ATA PTX4 BLUE, PTX 4 PINK)
  • AVIDSEN (104251, 104250, 104250 OLD, 104250 RED, 104257, 104350, 654250 BALLAN FM400, FM400E)
  • APERIO (GO, GO PRO, GO MINI)
  • BALLAN (FM400, FM40OE, FM404B, 4013, TO.GO, T2WV.TO.G04WV, TO.G02 WKTO.GO 4 WK, TO.GO2QVTO.G04 QV, I0, CUPIDO, LOT2WCV, LOT1W, LOT2W, LOT4w.LOT1WM, LOT2WM, T2W, T4W, T2, ROLLKEY-CUPIDo2-CUPID0 4-l0 &CO -APPLE 4W WTO.GO4W.APPLE)
  • CAM (CAM T431, T434, TOP432A, TOP434A, TOP432, TAM432SA, TOP432NA, TOP432EE/TOP 434EE, TOP 862EV)
  • CARDIN (S435, 8449, S486, 8476TX2, S476TX4, TRQ449100/TRQ449200TRQ449300TRQ449400, TXQ449200TXQ44$9300TXQ449400, 8486:TRQ486200/TRQ486400, TXQ486200/TXQ486400 S435, S449, 8486, S476TX2 TRQ S449, TRQ S449 GREEN (PRECODE), TXQ S449, TXQ S449 GREEN, TRQ S486, TXQ S486, S437 TX, XRADO)
  • CLEMSA (MUTANCODE, T, T-8, E-CODE N, MASTERCODE MV)
  • Chamberlain Liftmaster Motorlift (4330E, 4332E, 4333E, 4335E, 371LM, 81LM, 971LM, 84330E, 94334CE, 94333E, 94334E, 94335E, 9747E, GC844, CG844, C840, C940, C943, C945, CM842, CM844, CM128)
  • DEA (TR MIO, TR2MIOTR4 MIO, TS2 MIO 868/TS4 MI0 868, 133 1, 433 2, 433 4, SYSTEM PUNTO 278, GOLDR, GENIE R 273, MO TD2.MOTD4, GT2M, GT4M, GENIE, punto-2, punto-4)
  • DOORHAN (Doorhan Transmitter2, Doorhan Transmitter4)
  • DITEC (DITEC GOL4, GOL4C, BIX LS2, BIXLP2, BIXLP2 RED, BIXLG4, BIX AG4)
  • DASPI (ZERO RC)
  • ECOS TAR (RSC, RSE, RSZ)
  • ERREKA (IRIS, ROLLER 2, ROLLER 433, ROLLER 868, SoL433, SOL868, VEGA 433, VEGA 868, LUNA 2, LUNA 3, RESON1, RESON 2)
  • FAA (XT2IXT4 433 SLHLR.XT2/XT4 868SLHLR.XT4 433 RC, TM1 433 DS, TM2-433 DS, TM3 433 DS, 433L2, 433L4, TM22 433 SLP, TM433SLP, TE4433H, XT 433SLH, XT 868SLH, T 433 SLH, T 868, SLH, TML 433SLH, TML 868 SLH, DL 868 SLH)
  • FADINI (FADINI JUBI, JUBISMALL, ASTRO 43 SMALL, 433 M2ASTRO 433-2, ASTRO 433-4, JUBI2/JUBI4)
  • GIBIDI (GIBID1 OPEN TMB, OPEN OUT, AUO1590, AU1600, DOMI-NO AJ1680 WOOD, GIBIDI AU1610, GIBIDI AU1680, AU1810AUO3000, AUO3000 DOMINO, DTC 4334, DTS4334-AUO400, HSM4)
  • GENI (GITR-3, GIT, GICT390, GIFT390-1, G3T-BX, G1T-BX, GM3T, GICTD, GIFTD)
  • GENI S (CASALI A252RC, AMIGOLD, AMIGO, KILO BRAVO, ECHO)
  • HORMANN (HORIMANN HS1, HS2, HS4 868 HORMANN HSE2 868 HORMANN HSM2, HISM4 868HORMAN HSP4, HSP4-C 868 HORMANN HSD2-A, HSD2-C 868 HORMANN HSZ1, HSZ2 868 HORMANN FIT2 868 Blue button, can not cione other button)
  • KEY (KEY tutti i modelli senza esclusioni, 900TXB-42R, TXB 44R, SUB 44R)
  • KI G (GATES CLIPPER, STYLO)
  • LIFE (LIFE FIDO 2, LIFE FIDO 4 LIFE VIP 2, LIFE VIP 4 LIFE VIP 2*, LIFE VIP 4)
  • LABEL SPYco
  • LINEAR (MCT-11, ACT-21, ACT-22, STING RAY ACT-31, STING RAY ACT-34B)
  • MHOus (TX4, TX4C, GTX4)
  • MOOV (MT4, MT4G, MTX4V)
  • MARANTEC (433mhz 868mhz DIGITALE D 302868 Marantec Digital D 304 Marantec Digital D313 Marantec Digital D 321 Marantec Digital D323 Marantec comando 131)
  • MERLIN (MERLIN M842(GREEN REMOTE)M832(GREEN REMOTE), M844(GREENREMOTE).C945, C940, C943MERLN2.0 E945M, E943M1, E940M, E940M)
  • NICE (SMILO, SMILO2ISMILO4, FLOR-S, VERY-VR, ONEINTLFLO1, FLO1RE, FLO2REFLO4REFLO1R-S.FLO2R-S, FLO2, FLO4, FLO4R-s.VERY VR, ONE ERA:ON1E/ONE2E/ONE4E/ONE9E)
  • NoVOFERM (MCHS, MICRO-NOVOTRON 502, MIN-NOVOTRON 504, MICRO-NOVOTRON502, MICRO-NOVOTRON 504, MICRO-NOVOTRON31.MICRO-NOVOTRON 51, MINI-NOVOTRON 30, MINI-NOVOTRON 50, MNHS)
  • PECCININ (TX MENBRANA)
  • PRASTEL (MTE, MPSTLE, MPSTP2E, TCE, BFOR, TRQ-P, SLIM-E)
  • PUJOL (MARTE, P215, TWIN, VARIO, VARIO MARS, VARIOOCEAN, NEO)
  • SEAv (BE HAPPY RS, BE-SMART RSX, BE-HAPPY RH1, BE-HAPPY RH2, BE-HAPPY RH3)
  • SOMMER (4014(434), 4013 (434), 4025-TX02-868.4011, 4026(868), 4020(868), 4022 TX02(434), 4022 TX03-434-2, 4010, 4050)
  • STAGNOLI (KALLISTO, VENUS AV223)
  • TAU (250K-SLIMRP, 250K-SLIMR, 250T-4RP)
  • TELCOMA (FM40OE, FM400, EDGE2, EDGE4, Tango Blue 2, Tango Blue 4, Slim 2, Slim 4)
  • VDS (ECO-R, TRQP)
  • Vo (PHOX2, PHOX 4, PHOENIX 2, PHOENIX 4, TXC, TRC, TSC4, HANDY.PHOENIX.PHOX433, TPR1-43 BLUE, TPR2-43 BLUE, TPR1. 43PINK, TRR1, TRR2, TRR4, TRR2 purple, TRR4 purple)
Remote control showing compatibility with multiple brands
One new remote can replace up to four old remotes from different brands.
Diagram asking 'Can it work?' and suggesting to contact for compatibility
If unsure about compatibility, please contact support with a photo of your original remote.

Údržba

Výměna baterie:

The remote control uses a CR2032 3V battery. When the remote's LED indicator becomes dim or fails to light up, it's time to replace the battery. To replace:

  1. Opatrně otevřete kryt dálkového ovladače casing.
  2. Vyjměte starou baterii CR2032.
  3. Vložte novou baterii CR2032 a dbejte na správnou polaritu (+/-).
  4. Zavřete dálkový ovladač casinbezpečně.
Dálkové ovládání s baterií CR2032
Dálkové ovládání používá 2032V baterii CR3.

Čištění:

Dálkový ovladač otírejte měkkým, suchým hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky, protože by mohly poškodit ovladač.asing nebo vnitřních součástí.

Odstraňování problémů

Problém Možná příčina Řešení
Remote not working after cloning. Incorrect cloning procedure, low battery, incompatible original remote, rolling code not programmed with receiver. Re-attempt cloning following all steps carefully. Ensure original remote is compatible. Replace battery. For rolling codes, ensure programming with the receiver is completed.
Krátký provozní dosah. Obstructions, low battery, environmental interference. Ensure clear line of sight. Replace battery. Test in different locations to rule out interference.
LED not flashing during cloning or operation. Low or dead battery, remote not powered on (if applicable), internal fault. Replace the CR2032 battery. Ensure buttons are pressed firmly. If problem persists, contact support.

Tipy pro uživatele

  • Ověřte kompatibilitu: Before attempting to clone, always confirm that your original remote control's brand and model are listed as compatible. If in doubt, send a photo of your original remote to customer support for verification.
  • Optimal Cloning Distance: Maintain a distance of 4-5 cm between the original and new remote during the cloning process for best results.
  • Rolling Code Specifics: Remember that rolling code remotes require an additional programming step with your receiver after the initial cloning. This is a common point of confusion for users.
  • Kontrola baterie: If you experience issues, a fresh CR2032 battery can often resolve problems related to range or unresponsive buttons.

Záruka a podpora

V případě jakýchkoli dotazů, technické pomoci nebo reklamací se prosím obraťte přímo na prodejce nebo výrobce. Uschovejte si účtenku jako doklad o koupi.

This product is certified with CE, ensuring it meets European safety, health, and environmental protection requirements.


Scimagic SMG-233 Universal Remote Control Duplicator Programming Guide

Scimagic SMG-233 Universal Remote Control Duplicator Programming Guide

0:30 • 1280×720 • návod

Související dokumenty - SMG-233

Předview Manuál k přijímači SMG-822V2.0: Specifikace a programovací průvodce
Komplexní manuál k přijímači Scimagic SMG-822V2.0, s podrobnými specifikacemi, programovacími pokyny pro vysílače a pracovními režimy.
Předview Scimagic SMG-012 Remote Control Programmer User Guide
Instructions for programming the Scimagic SMG-012 remote control using the programmer device, including password deletion and remote control pairing.
Předview Scimagic Remote Control Programming Guide - Instructions & Specifications
Comprehensive guide for programming Scimagic remote controls, including step-by-step instructions, technical specifications, and manufacturer details for garage door openers and access systems.
Předview Scimagic Remote Control Programming Guide
Comprehensive guide to programming Scimagic remote controls, compatible with Hormann HSM2, HSM4, HSE2 garage door and gate openers operating at 40MHz/685MHz. Learn step-by-step instructions for pairing your remote with a receiver.
Předview Scimagic AC Receiver Module - Technical Manual and Operation Guide
Technical specifications, operating modes (momentary, toggle, latched), and wiring diagrams for the Scimagic AC receiver module operating at 433.92MHz, including AC85-256V input and SRD-12VDC-SL-C relays.
Předview Scimagic Remote Control Programming Guide
Instructions for programming Scimagic remote controls, including steps for code deletion and pairing with original transmitters.