ESMARTER JX-F72 LED solární nástěnná dělená lampa Lamp Uživatelská příručka

1. Konec produktuview

The ESMARTER JX-F72 is an advanced LED solar split wall lamp designed for outdoor lighting. It features a sensitive infrared human body motion sensor, multiple operating modes, and a durable IP65 waterproof and dust-proof design, making it ideal for illuminating gardens, patios, hallways, porches, yards, and garages. The split design allows for flexible placement of the solar panel to maximize sunlight exposure, ensuring automatic charging during the day and intelligent light control at night without manual operation or electricity charges.

Obrázek 1: Produkt přesview - LED Solar Split Wall Lamp with remote control and 3 modes.

2. Obsah balení

• LED Solar Split Wall Lamp jednotka
• Solar Panel with 3-meter connection cable
• Dálkové ovládání
• Montážní šrouby a hmoždinky
• Uživatelská příručka (tento dokument)

3. Instalace a nastavení

Jáamp is designed for easy installation. Follow these steps for optimal performance:

1. Vyberte umístění: Vyberte vhodné umístění pro lamp unit and the solar panel. The lamp unit should be placed where light is desired, such as a wall, fence, or garage.
2. Umístění solárního panelu: The solar panel should be installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure adequate charging. The 3-meter cable allows for flexible placement of the solar panel away from the lamp jednotku v případě potřeby.


Figure 2: Ensure solar panels are placed in direct sunlight for optimal charging.

3. Montáž:
   • Mark the desired drilling points on the wall for both the lamp unit and the solar panel bracket.
   • Vyvrtejte otvory a vložte hmoždinky.
   • Zajistěte lamp unit and solar panel bracket to the wall using the provided screws.
   • Adjust the angle of the solar panel to face the sun directly.
4. Připojte solární panel: Connect the cable from the solar panel to the input port on the lamp jednotka.


Figure 3: Split design allows for flexible placement of the solar panel.

5. Počáteční poplatek: Allow the solar panel to charge the lamp for a full day (6-8 hours) before first use to ensure the battery is adequately charged.

4. Návod k obsluze

Jáamp features automatic operation and can be controlled via the integrated ON/OFF switch or the included remote control.

4.1. Zapnutí/vypnutí

• Ruční spínač: Najděte vypínač ON/OFF na lamp unit. Ensure it is in the "ON" position for automatic operation.
• Dálkové ovládání: Use the "ON" and "OFF" buttons on the remote control to manually turn the light on or off.

4.2. Provozní režimy

Jáamp offers three distinct operating modes, selectable via the remote control:

Obrázek 4: Funkce dálkového ovládání.

1. Mode 1: High Light Sensor Mode (Remote button: MODE1)
   • During the day, the lamp poplatky.
   • At night, the light remains off until motion is detected.
   • When human body motion is sensed within range, the lamp illuminates at high brightness.
   • After motion ceases, the light turns off completely.
2. Režim 2: Režim senzoru tlumeného světla (Remote button: MODE2)
   • During the day, the lamp poplatky.
   • At night, the lamp stays on at a dim brightness.
   • When human body motion is sensed within range, the lamp illuminates at high brightness.
   • After motion ceases, the light returns to dim brightness.
3. Mode 3: Constant On Mode (Remote button: MODE3)
   • During the day, the lamp poplatky.
   • At night, the lamp remains on at a constant dim brightness, regardless of motion.

Obrázek 5: Vizuální znázornění tří provozních režimů.

4.3 Funkce SOS

Press the "SOS" button on the remote control for emergency signaling. The lamp will flash in an SOS pattern.

5. Údržba

The ESMARTER JX-F72 is designed for low maintenance. To ensure longevity and optimal performance:

• Čistý solární panel: Solární panel pravidelně otírejte měkkým hadříkemamp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and efficient charging.
• Zkontrolujte překážky: Periodically check that no new obstructions (e.g., tree branches, leaves) are blocking sunlight from reaching the solar panel.
• Odolnost vůči počasí: Jáamp has an IP65 waterproof rating, making it resistant to rain and harsh weather conditions. However, avoid submerging the unit in water.

Obrázek 6: Lamp is IP65 rated for waterproof and rainproof performance.

6. Řešení problémů

If you encounter issues with your solar lamp, postupujte podle následujících běžných kroků pro řešení potíží:

• Lamp Not Turning On at Night:
  • Ensure the ON/OFF switch on the lamp unit is in the "ON" position.
  • Verify the solar panel is receiving adequate direct sunlight for charging (6-8 hours).
  • Check for any light sources near the lamp that might trigger its daylight sensor, preventing it from turning on.
  • The battery might be depleted. Allow for a full day of charging in direct sunlight.
• Light is Dim or Not Bright Enough:
  • Ensure the solar panel is clean and free from dirt or obstructions.
  • Confirm the solar panel is positioned to receive maximum direct sunlight.
  • Check the selected operating mode. Mode 2 and Mode 3 have dim light settings.
• Motion Sensor Not Responding:
  • Ujistěte se, že lamp is in Mode 1 or Mode 2, as Mode 3 does not use the motion sensor.
  • Check for any obstructions directly in front of the motion sensor.
  • Ověřte lamp is fully charged. Low battery can affect sensor performance.
• Dálkové ovládání nefunguje:
  • Ujistěte se, že dálkové ovládání má funkční baterie.
  • Namiřte dálkový ovladač přímo na lamp's sensor receiver.
  • Check for any physical obstructions between the remote and the lamp.

7. Specifikace

Figure 7: Approximate dimensions of the solar panel and lamp jednotka.

8. Uživatelské tipy

• Maximalizace výdrže baterie: To ensure the longest possible illumination time, always position the solar panel in an area that receives maximum direct sunlight throughout the day. A full charge will provide optimal performance and extend the battery's operational hours.
• Optimální výkon senzoru: For best motion detection, ensure the sensor is not obstructed and is positioned to cover the desired area.
• Dosah dálkového ovládání: The remote control works best when pointed directly at the lamp unit's sensor receiver within a reasonable distance.

9. Záruka a podpora

For any questions, technical support, or warranty claims, please contact the seller or retailer from whom you purchased this product. Please refer to your purchase documentation for specific warranty terms and contact information.

Digitální verze této uživatelské příručky je k dispozici ke stažení: Uživatelská příručka (PDF)