Acceo A45P 4K Dashcam User Manual

1. Úvod

O této příručce

We make every effort to ensure the accuracy of this user guide, but we cannot guarantee that the content is entirely correct. Specifications and other details may differ slightly due to ongoing product improvements.

Konec produktuview

• The dimensions shown in this manual are approximate values.
• Illustrations are for illustrative purposes only and may differ from the actual ones.
• Specifikace a vzhled tohoto produktu se mohou bez upozornění změnit za účelem vylepšení.
• After taking out the packaging materials, dispose of them properly or recycle them according to the regulations of the local government.

2. Nastavení a instalace

Obecné poznámky k instalaci

1. Since the machine moves during transportation, it is attached with a protective film to prevent damage. Before use, please record some videos to test the camera's quality.
2. Use only the original power supply. Using another brand of power supply may damage or burn the equipment.
3. If you want to use the parking monitoring or motion detection function, you need to use a buck line (Hardwire kit) to connect the video recorder to the car battery (the buck line is sold separately).
4. Nainstalujte tuto jednotku blízko zadníhoview mirror so that you can record a wide-angle landscape at its maximum.
5. Ensure that the lens is within the wiper's range so that you can record clearly even in the rain.
6. Do not touch the lens with your finger. Finger oil can remain on the lens, causing unclear video or still images. Clean the lens regularly with a soft cloth to remove dust. Avoid chemical detergents, gasoline, alcohol, or anti-static sprays.
7. This product is suitable for most cars. For trucks, pay attention to the length of the car charger line.
8. Please scan the provided QR code to watch our installation video before installing the video recorder. It is highly recommended to ask a professional auto mechanic to complete the installation at an auto shop.

Komponenty produktu

Below is a diagram illustrating the main parts of the dashcam and its ports.

• TF Card Slot
• Rozhraní zadní kamery
• Vstup napájení
• Tlačítko Reset
• Tlačítko napájení

Instalace zadní kamery

Connect the rear camera's red cable wire with your car's reverse lamp positive pole (+). Then, plug the car charger into the cigar lighter to power the car DVR. When you shift your car into Reverse Gear, the car DVR will automatically switch to the rear camera with parking lines, enabling the auto-reversing function.

Buck Line Installation (for 24H Parking Monitoring)

The buck line is used to provide continuous power to the DVR for 24-hour parking monitoring without occupying the cigarette lighter interface. You will need to find two fuse slots for this step:

1. A fuse slot that provides constant power (RED wire will go here).
2. A fuse slot that only provides power when you turn your key to the ACC position (YELLOW wire will go here).
3. Connect the BLACK wire to the grounding screw or bolt.

Instalační video průvodce

For a visual guide on installation, please watch the official product video:

Packing List (Example Configurations)

The contents of your package may vary depending on the specific configuration purchased. Below are examples of common packing lists:

DVR with 6M SONY RC

• 1x DVR
• 1 x Power charger
• 1 x Uživatelská příručka
• 2 x Bandage
• 1 x čtečka karet USB (dárková)
• 1 x 1080P Sony Rearview Camera With 6 Meters Cable

DVR with 6M SONY RC-BL

• 1x DVR
• 1 x Power charger
• 1 x Uživatelská příručka
• 2 x Bandage
• 1 x čtečka karet USB (dárková)
• 1 x 1080P Sony Rearview Camera With 6 Meters Cable
• 1 x Buck Line

DVR with 6M SONY RC-GPS

• 1x DVR
• 1 x Power charger
• 1 x Uživatelská příručka
• 2 x Bandage
• 1 x čtečka karet USB (dárková)
• 1 x 1080P Sony Rearview Camera With 6 Meters Cable
• 1 x GPS modul

DVR with 6M SONY RC-BL-GPS

• 1x DVR
• 1 x Power charger
• 1 x Uživatelská příručka
• 2 x Bandage
• 1 x čtečka karet USB (dárková)
• 1 x 1080P Sony Rearview Camera With 6 Meters Cable
• 1 x Buck Line
• 1 x GPS modul

3. Návod k obsluze

Funkce tlačítka napájení

1. As a power switch:
   • Spuštění: Press and hold the Power Button for 2 seconds to turn on the video recorder. The machine will start working automatically.
   • Vypnout: Press and hold the Power Button for 2 seconds to automatically save the video file and user settings. The video recorder will shut down.
2. To turn on/off the display: Press the Power Button in the power-on state to turn the display black, and press again to turn it on.

Touch Buttons and Menu Functions (Main Interface)

1. Locking (EMR emergency): In video mode, click the add-lock sign "🔒" to add the current video as a locked file (20 seconds before and after the event). Click the unlock icon "🔓" to unlock the current file.
2. Přepínač zvuku: Click to turn the recording function on or off. The setting will be automatically saved.
3. Záznam videa: The default icon in video state is "🔴", in non-video state is "⚪". Click to change the video status.
4. Take photo when recording: Klikněte na "📷" to take a photo.
5. Playback interface: Klikněte na "▶" to enter the playback interface.
6. Nastavení rozhraní: Klikněte na "⚙️" to enter the settings interface.
7. Ikona nahrávání: "🔴" flashing indicates normal recording. Non-recording status will hide the icon.
8. Recording time (Loop Record): Under normal recording, the recording time is displayed (default 1 minute). You can change the cycle recording time in settings. Non-recording status will hide.
9. Rezoluce: Displays current video resolution (default 4K/2.5K/1080P/720P). Can be changed in settings.
10. Čas: Displays current RTC time, which can be set in settings.
11. Nastavení jasu: Slide up/down or swipe right/left to adjust brightness.
12. Ikona jasu: "+" "-" indicates brightness.
13. SPZ: Can be set in the settings interface.
14. WIFI icon: Enabling WIFI displays a white WIFI icon. It turns green when connected to the mobile app.
15. WiFi APK download: Go to settings, find WiFi, click it, then scan the QR code to download the APK.
16. Ikona GPS: When the GPS module is plugged in, a white GPS icon is displayed. It turns green when receiving a signal.
17. Rychlost GPS: When GPS receives a signal, the GPS icon is green and GPS speed is displayed. Note the difference between km/h and mph.
18. G-senzor: OFF/LOW/MIDDLE/HIGH. With built-in G-sensor, the dash camera automatically detects sudden shake/collision and locks footage, aby se zabránilo přepsání.
19. Parkovací monitor: OFF/LOW/MIDDLE/HIGH. When activated, the dash camera automatically turns on and records when vibration is detected, or captures frames for a time-lapse video for 20 seconds.
20. Časosběrné nahrávání: Four forms: off, 5 hours, 12 hours, 24 hours. Default is off. If ACC disconnects, the recorder prompts "Enter Video Recording" and enters streaming. Screen turns off after 5 seconds. If touch occurs, it turns off again after 10 seconds. When ACC is powered on, it exits video recording.
21. Streamovat média: OFF/ON. When "on", rear camera is full screen by default. When "off", front camera is full screen by default.
22. Jazyk: Multi-language. Contact support for new firmware if more languages are needed.
23. Time zone selection: Nastavte místní časové pásmo.
24. Spánek obrazovky: Off, 10s, 30s, 3 minutes. Default is off. Screen turns off after no touch. Recording continues even when screen is off.
25. Formát SD: Format the TF card. Always format Micro SD card before use.
26. Obnovení továrního nastavení: Dialog box appears to confirm factory settings recovery.

Ovládání obrazovky hlavního rozhraní

• Posuňte nahoru a dolů: Change the display position of the current camera video screen. Operation is saved after dragging.
• Posouvání doleva a doprava: Change the current video display source (front view, zadní view, split screen). Sliding left/right on the brightness part adjusts brightness. Operation is saved after sliding.

Rozhraní přehrávání

1. File rozhraní seznamu: Click 'Playback icon' to enter the playback interface and video file interface (front camera by default).
2. Video file režim: Klikněte na view normální záznam files. Front and rear camera files are saved in "front_norm" and "back_norm" folders.
3. Zámek file režim: Klikněte na view uzamčené video files. Front and rear camera locked files are saved in "front_emr" and "back_emr" folders.
4. Fotografie file režim: Klikněte na view and store photo files. Front and rear camera photo files are saved in "front_photo" and "back_photo" folders.
5. Přepínání přední a zadní kamery: Přepínání mezi přední a zadní kamerou files pod proudem file.
6. Vymazat: Vyberte požadované file, click delete icon to confirm.
7. Files v mřížce: Swipe up/down to select file, then enter playback interface.
8. Návrat: Návrat do hlavního rozhraní.
9. Vybrat vše: Vyberte vše files.

Klíčové vlastnosti Vizuální prvky

4. Údržba

Čištění objektivu

Do not touch the lens with your finger. Finger oil can remain on the lens, causing unclear video or still images. Clean the lens regularly with a soft cloth to remove dust. Be careful not to use chemical detergents, gasoline, alcohol, or anti-static sprays to clean the product.

Správa SD karty

Always format the Micro SD card before its first use and periodically to maintain optimal performance. Refer to the 'Format SD' section in the operating instructions for details.

5. Řešení problémů (Často kladené otázky)

1. What if the dash cam cannot be turned on?
   • Plug in the car charger and try to turn it on by pressing the On-Off key for about 3 seconds.
   • Charge the dash cam for about 5 minutes before turning it on, then manually restore factory settings.
   • Press the Reset button through the pin to restore factory settings.
2. What if the dash cam turns on or off automatically?
   • The dash cam needs to be plugged into the car charger for use. The built-in battery has small capacity and is mainly used for parking monitor mode to record important videos.
   • Support Class 10 or above Micro SD Card. Please format the card before use.
3. What if the product cannot read the card?

   Please use a genuine Class 10 or above Micro SD Card. Format the SD Card on the computer before use, and then insert the card correctly (there will be slight rebound resistance when inserted correctly).
4. What if the video function cannot be used normally?

   Please format the micro SD card in the dash cam before using. Support 16GB/32GB/64GB/128GB micro SD card, Class 10 or above is recommended.

5. What if the product cannot be used normally after working for a period of time?
   • It is possible that the G-sensor function is set, leading to too many locked files and preventing loop recording. Manually delete locked files.
   • Check if the G-sensor sensitivity is set to High. If too high, files might be locked due to road bumps and prevent overwriting. Set G-sensor from high to medium or low.
   • Use motion detection only when not driving.
6. What if the rear camera doesn't work?
   • The rear camera is not connected properly. Check whether the rear camera is connected correctly.
   • The rear camera's wiring is not connected tightly, or there is a loose contact at the interface. Check whether the rear camera's connection is normal.
7. What if the image from the rear camera is upside down?

   The rear camera is installed in the wrong direction. Adjust to the correct installation mode.

8. What if the screen turns black after turning it on for about one minute?

   The Screen Dormant function is turned on in settings. Please turn off this function.

9. What if the product cannot set the date and time correctly?

   Ensure the product has enough power. Enter system settings, find the date and time option, and set it. After setting, manually turn off the dash cam to complete the date and time setting.
10. Why does the product automatically heat up?
    • The product has been used for a long time.
    • The temperature in the car is too high.
11. Recordings have wrong date/time (e.g., January date)?

    Set the date and time through the settings menu. After setting, manually turn off the dash cam. Time setting is completed.

12. The recorded image is not clear?
    • There is a protective film on both front and rear camera lenses. Peel off both films before use.
    • Check if the windshield is clean.
13. The sound of the button is very noisy?

    Select "OFF" for the operation voice (OFF/ON) button in the system settings (Optical).

6. Specifikace

7. Uživatelské tipy

• WiFi připojení: The dashcam supports WiFi connectivity, allowing you to connect to your smartphone. Through the dedicated app, you can view recorded videos, take photos, playback footage, and adjust various settings directly from your phone.
• Kvalita SD karty: Always use a high-quality Class 10 Micro SD card (16GB to 128GB) for reliable recording. Low-quality or slow SD cards may cause recording issues.
• Citlivost G-senzoru: If you experience frequent locked files or issues with loop recording, check your G-sensor sensitivity settings. Adjust it from High to Medium or Low to prevent unnecessary file locking due to road bumps.
• Parkovací monitor: For 24-hour parking monitoring, ensure you install a buck line to provide continuous power to the DVR. This feature helps protect your vehicle when parked by recording events triggered by impacts.

8. Záruka a podpora

Informace o záruce

• 30denní záruka vrácení peněz: For 30 days after the date of purchase, you may return your undamaged product for a full refund for any reason.
• 12-Month Warranty for Quality-Related Issues: For 12 months after the date of purchase, we will handle all quality-related issues with a replacement or full refund.

Přátelské připomenutí: Make sure to read this user manual thoroughly and use the product as instructed. When contacting us for help, please have your product handy for troubleshooting.

Omezení

Our returns and exchange service is limited to purchases made from Authorized stores. If you purchased through a different retailer, please contact them directly. Unauthorized reselling of our products is prohibited.

Kontaktní informace

Webmísto: www.e-ace.cn
E-mail: fireking@e-ace.cn
Telefon: +86 0755-8464 4084
Tel. (WhatsApp): +86-18127083357
Adresa: 2. patro, č. 1 ulice Yuanxia, ​​okres Pingshan, město Shenzhen, provincie Guangdong, 518000, Čína