1. Úvod
This manual provides instructions for the installation and maintenance of your new Motorcycle Handguards Protector. These handguards are designed to offer enhanced protection from wind, rain, and debris for riders of the Honda X-ADV750 models from 2017 to 2020, improving overall riding comfort and safety.
2. Specifikace
| Funkce | Detail |
|---|---|
| Typ produktu | Motorcycle Handguards Protector |
| Kompatibilita | Honda X-ADV750 (2017, 2018, 2019, 2020 models) |
| Materiál | Odolný ABS plast |
| Barva | Černý |
| Rozměry balení (D x Š x V) | 33 cm x 19 cm x 11 cm |
| Hmotnost balení | 0.29 kg |
| Původ | pevninská Čína |
3. Obsah balení
Před zahájením instalace se prosím ujistěte, že jsou všechny komponenty přítomny:
- 1 Pair x Handguard Protectors (Left & Right)
- Montážní držáky (2 kusy)
- Montážní šrouby (2 kusy)
4. Instalační příručka
The handguards are designed for easy installation. Follow these steps to mount them on your Honda X-ADV750:
- Ensure your motorcycle is parked on a stable surface and the engine is off.
- Identify the left and right handguard pieces and their corresponding mounting brackets.
- Attach each mounting bracket to the designated mounting point on your motorcycle's handlebar. These points are typically near the handlebar ends, often utilizing existing mirror or lever perch bolts.
- Secure the handguard protector to its respective mounting bracket using the provided screws. Do not overtighten initially.
- Adjust the position of the handguards to ensure they do not interfere with the operation of the brake or clutch levers, or any other handlebar controls.
- Once satisfied with the positioning, securely tighten all screws.
5. Provoz
These handguards are passive protection devices. Once correctly installed, they operate continuously to shield your hands from environmental elements and minor impacts. No active operation is required.
6. Údržba
- Čištění: Clean the handguards regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the ABS plastic.
- Inspekce: Periodically check all mounting screws for tightness. Vibrations from riding can sometimes loosen fasteners.
- Poškození: In case of significant impact or damage to the handguards, inspect them for cracks or structural integrity issues. Replace if necessary to ensure continued protection.
7. Řešení problémů
- Handguards feel loose: Check all mounting screws and ensure they are tightened securely.
- Interference with controls: If the handguards obstruct lever movement or other controls, loosen the mounting screws, adjust the position, and re-tighten.
8. Uživatelské tipy
- For optimal protection, ensure the handguards are positioned to cover the maximum area around your hands without impeding control movement.
- Consider applying a protective wax or sealant to the ABS plastic to maintain its finish and provide additional UV protection.
9. Záruka a podpora
For any questions regarding installation, operation, or maintenance not covered in this manual, please contact the seller or manufacturer's customer support. Keep your purchase receipt for any warranty claims.
