Tuya Zigbee/WiFi Door/Window Entry Sensor Instruction Manual

1. Důležité poznámky

• Batteries (LR03-1.5V/AAA*2) are not included in the package.
• The product is not waterproof and is not suitable for outdoor use.
• The WiFi Version (D06) only supports WiFi 2.4GHz networks.
• The Zigbee Version (ZD06) only supports Zigbee 3.0 and requires a Tuya Zigbee Hub or Tuya Multi-mode Gateway.

2. Vlastnosti produktu

• Okamžité oznámení: Dostávejte okamžitá upozornění na telefon, když se otevřou nebo zavřejí dveře nebo okno.
• Upozornění na alarm: Triggers an alarm notification to your device upon unauthorized opening.
• Záznam poplachu: Access a history of open/close events and monitor battery levels via the app.
• Sdílení zařízení: Sdílejte přístup k senzorům s členy rodiny prostřednictvím funkce „Správa domácnosti“ v aplikaci.
• Nízký objemtage Připomenutí: Automatic notifications prompt you to replace batteries when power is low.
• Integrace chytré domácnosti: Works seamlessly with Amazon Alexa and Google Assistant.

3. Průvodce nastavením

3.1 Obsah balení

• Main Body (Sensor) x 1
• Small Body (Magnet) x 1
• 3M Adhesive Tapes Kit x 1
• Uživatelská příručka v angličtině x 1

3.2 Instalace baterie

1. Open the battery compartment of the main sensor body.
2. Insert two LR03-1.5V/AAA batteries (not included), ensuring correct polarity.
3. Bezpečně uzavřete přihrádku na baterie.

3.3 Výběr místa instalace

The sensor can be installed on doors, windows, drawers, mailboxes, garages, cabinets, or any other open/close points. Ensure the installation location has a good WiFi/Zigbee signal. The product is designed for indoor use only and should not be exposed to water or direct heat sources like sunlight or heaters.

3.4 Fyzická instalace

1. Clean the surface where the sensor will be mounted.
2. Attach the main sensor body to the door/window frame using the 3M adhesive tape.
3. Attach the small magnet body to the moving part of the door/window, aligning it with the main sensor body. The gap between the two parts should be minimal when closed.

3.5 App Connection (Smart Life / Tuya Smart)

1. Stáhněte si aplikaci „Smart Life“ nebo „Tuya Smart“ z obchodu s aplikacemi ve vašem chytrém telefonu.
2. Zaregistrujte se nebo se přihlaste ke svému účtu.
3. For WiFi Version (D06): Ensure your phone is connected to a 2.4GHz WiFi network. In the app, select "Add Device" and follow the on-screen instructions to connect the sensor. The sensor's indicator light should be flashing rapidly during pairing.
4. For Zigbee Version (ZD06): Ensure you have a Tuya Zigbee Hub or Tuya Multi-mode Gateway already set up and connected to your app. In the app, select "Add Device" and follow the instructions to add the Zigbee sensor through your hub.

4. Návod k obsluze

4.1 Monitoring Door/Window Status

Once connected, the sensor will detect the open/close status of the door or window. You will receive instant notifications on your smartphone when the status changes.

4.2 Remote Monitoring and Event Records

The app allows you to remotely monitor the sensor's status from anywhere, anytime. It also keeps a cloud-based record of all open/close events, providing a 7*24 protection log.

4.3 Sdílení zařízení

To share access to the sensor with family members, navigate to "Me" > "Home Management" in the Smart Life/Tuya Smart app. This allows multiple users to monitor the status of your doors/windows.

4.4 Integrace platformy pro chytrou domácnost

The sensor can be integrated with Amazon Alexa and Google Assistant for voice control and smart routines. To configure, use the "Skill" function within the Smart Life/Tuya Smart app (Me > Third Party Services) after the sensor is successfully connected to the app.

5. Údržba

5.1 Výměna baterie

When the app sends a low voltage reminder, it's time to replace the batteries. The battery compartment is designed for easy access, allowing replacement without tools. Simply push to open, replace the two LR03-1.5V/AAA batteries, and close.

5.2 Obecná péče

• Keep the sensor clean and free from dust.
• Nevystavujte zařízení extrémním teplotám nebo vysoké vlhkosti.
• Ensure the gap between the main body and the magnet remains consistent for optimal performance.

6. Řešení problémů

6.1 WiFi Version Configuration Failure

If you encounter issues connecting your WiFi sensor (D06) to the app:

1. Power and Indicator: Ensure the sensor is powered on and its indicator light is flashing rapidly.
2. WiFi síť: Verify your mobile device is connected to a 2.4GHz WiFi network.
3. Oprávnění aplikace: Grant Bluetooth permission to the Smart Life/Tuya Smart app and ensure your phone's Bluetooth is enabled (and location services if using low-power Bluetooth).
4. Síťové připojení: Check that your router is functioning correctly and your internet connection is stable.
5. WiFi heslo: Zkontrolujte, zda je heslo k Wi-Fi zadané v aplikaci správné.
6. Omezení routeru: Confirm your WiFi router does not have access restrictions like MAC address whitelists.
7. Konflikt SSID: If your 2.4GHz and 5GHz WiFi bands share the same name (SSID), try changing the 2.4GHz SSID and connect your phone specifically to it.
8. Režim AP: If issues persist, turn off your phone's Bluetooth, then long-press the sensor's Reset Button for 5 seconds until the indicator light flashes slowly. Try adding the device using AP mode in the app, following the on-screen guidance.

6.2 Smart Speaker / Third-Party Integration Issues

Smart speakers (e.g., Amazon Alexa, Google Home) cannot directly connect to the sensor. They require linking through the Smart Life/Tuya Smart app's "Skill" function. Ensure your sensor is successfully configured in the Smart Life/Tuya Smart app first, then proceed to link accounts via "Me" > "Third Party Services" in the app.

7. Specifikace

8. Uživatelské tipy

• Síla signálu: Always ensure a strong WiFi or Zigbee signal at the sensor's installation location for reliable performance.
• Optimální umístění: Avoid placing the sensor directly in sunlight or near heat sources to prevent potential damage or false readings.
• Přizpůsobení aplikace: Explore the "Scenes & Automation" section in the Smart Life/Tuya Smart app to create custom routines, such as turning on lights when a door opens.
• Pravidelné kontroly: Periodically check the battery level in the app to ensure continuous protection.

9. Často kladené otázky (FAQ)

Q: What are the necessary conditions for using the sensor?

A: For the WiFi version, you need a smartphone with the app, and a constantly online 2.4GHz WiFi router. For the Zigbee version, you need a smartphone with the app, and a Tuya Zigbee Hub or Tuya Multi-mode Gateway.

Q: How do I know if my WiFi router has a 2.4GHz frequency?

A: Most routers support 2.4GHz, often indicated on the router's nameplate. If unsure, consult your router's manual to enable the 2.4GHz band.

Q: Can I control the sensor via 2G, 3G, 4G, or 5G mobile networks?

A: Yes, as long as your mobile phone has internet access, the app can control the sensor. The sensor itself needs to remain connected to your home WiFi/Zigbee network.

Q: Is the sensor compatible with Somfy Tahoma?

A: Compatibility with Somfy Tahoma is not explicitly stated. The sensor is designed to work with Tuya, Alexa, and Google Assistant platforms.

Q: Can multiple people use the sensor?

A: Yes, you can use the device sharing function in the app to share access with family members, or create a virtual home in the app and invite others to join.

10. Záruka a podpora

For technical support, troubleshooting assistance, or inquiries regarding your Tuya Door/Window Entry Sensor, please refer to the support section within the Smart Life or Tuya Smart application. Ensure your app is updated to the latest version for access to the most current features and support resources.

Produkt je certifikován dle norem CE, FCC a RoHS, což zajišťuje shodu s příslušnými bezpečnostními a environmentálními předpisy.