AZDOME Hardwire Kit OBD Instruction Manual

Zavedení

The AZDOME Hardwire Kit OBD is designed to provide continuous power to your AZDOME dash camera, enabling 24-hour parking monitoring and protecting your vehicle's battery from over-discharge. This kit connects directly to your vehicle's OBD port, offering a clean and efficient power solution without occupying the cigarette lighter port.

This manual provides detailed instructions for installation, operation, and maintenance of your AZDOME Hardwire Kit OBD.

Klíčové vlastnosti

• 24hodinový monitoring parkování: Automatically enables time-lapse recording or emergency video saving upon collision detection when the vehicle is off.
• Nízký objemtage Monitoring: Automatically cuts power to prevent vehicle battery over-discharge.
• Efektivní výstupní výkon: Delivers a maximum output current of 2.5A.
• Více ochranných funkcí: Includes safety, input short-circuit, output high voltage, nadproudová, zkratová a přehřátá ochrana.
• Snadná instalace: Designed for straightforward connection to the vehicle's OBD port.
• Kompatibilita: Available with Micro USB, Mini USB, and Type C ports to fit various AZDOME dash cam models.

Kompatibilita

The AZDOME Hardwire Kit OBD is available with different port types to ensure compatibility with various AZDOME dash cam models:

• OBD01 (Type-C Port): Compatible with M580, M560, M660, M330, GS63Pro, GS63H Pro, PG19X, PG18S, PG16S, M27.
• OBD02 (Micro USB Port): Compatible with M300S, M300, M301.
• OBD03 (Mini USB Port): Compatible with M550, M550 Pro, PG17, M63 Lite, GS63H, M01 Pro, M200, M17, PG02S-R, PG16S-R.

Nastavení a instalace

Follow these steps to install your AZDOME Hardwire Kit OBD:

1. Vyhledejte rozhraní OBD: Find your vehicle's OBD interface. It is usually located in the lower left corner of the steering wheel area.
2. Připojení OBD konektoru: Align the OBD plug of the hardwire kit with the vehicle's OBD interface and plug it in directly.
3. Veďte kabel:
   • Gently pull down the vehicle door ceiling strip.
   • Insert the wire along the gap between the ceiling strip and the vehicle's interior.
   • Continue routing the cable neatly along the A-pillar and the top edge of the windshield towards your dash camera's mounting location.
   • Use a pry tool (if necessary) to tuck the cable securely into the gaps.
4. Připojení k palubní kameře: Insert the power interface (Micro USB, Mini USB, or Type C, depending on your kit version) into your dash camera.

This installation method ensures a clean setup, making installations simple and convenient.

Návod k obsluze

Once installed, the AZDOME Hardwire Kit OBD operates automatically to manage power for your dash camera, especially for parking monitoring functions.

24hodinový monitoring parkování

When your vehicle's ignition is turned off, the hardwire kit will signal your dash camera to enter parking monitoring mode. This mode typically includes:

• Časosběrné nahrávání: The dashcam records continuously at a low frame rate (e.g., 1fps) to save storage space while covering extended periods.
• Detekce kolize: If a collision or significant impact is detected while parked, the dashcam will automatically save an emergency video clip to protect crucial evidence.

Nízký objemtage Monitorování

The hardwire kit is equipped with a low voltage protection feature. If your vehicle's battery voltage drops below a safe threshold, the kit will automatically cut off power to the dash camera. This prevents excessive drain on your car battery, ensuring you can start your vehicle without issues.

Údržba

The AZDOME Hardwire Kit OBD requires minimal maintenance. To ensure optimal performance:

• Periodically check the connections to the OBD port and the dash camera to ensure they are secure.
• Ensure the cable routing remains neat and does not interfere with vehicle operation or safety features.
• Keep the OBD port free from dust and debris.

Odstraňování problémů

If you encounter issues with your AZDOME Hardwire Kit OBD, consider the following:

Dash Cam Not Powering On in Parking Mode:

• Zkontrolujte připojení: Ensure the hardwire kit is securely plugged into both the OBD port and the dash camera.
• Autobaterie Voltage: The kit might have cut power due to low vehicle battery voltage. Start your car to recharge the battery.
• Dash Cam Settings: Verify that your dash camera's parking mode feature is enabled and configured correctly in its settings.

Dash Cam Not Recording While Parked:

• SD Card Issues: Check if the SD card is full, corrupted, or not inserted correctly. Format the SD card if necessary (back up important file(nejprve).
• Motion/Impact Sensitivity: Adjust the sensitivity settings for parking mode on your dash camera. If too low, it might not trigger recordings.

General Power Issues:

• Incorrect Port Type: Ensure you are using the correct hardwire kit version (Micro USB, Mini USB, or Type C) for your specific dash cam model.
• Funkce OBD portu: If other OBD devices also fail, there might be an issue with your vehicle's OBD port. Consult a mechanic.

Specifikace

Tipy pro uživatele

• Zkontrolujte kompatibilitu: Před nákupemasing, always confirm the correct port type (Micro USB, Mini USB, or Type C) for your specific AZDOME dash cam model to ensure proper fit and function.
• Alternative Dash Cams: While designed for AZDOME, some users inquire about compatibility with other brands like 70mai. Always verify power requirements and port types for non-AZDOME dash cams.
• Bezpečné vedení kabelů: Take your time to route the cable neatly and securely to avoid interference with vehicle controls and to maintain a clean interior aesthetic.

Záruka a podpora

For warranty information, technical support, or further assistance, please refer to the official AZDOME webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případné reklamace.