1. Úvod
The DATOUBOSS DN-022 Pure Sine Wave Inverter is a versatile power conversion device designed to transform DC (Direct Current) power from a 12V source into AC (Alternating Current) 220V power. Utilizing advanced MCU microprocessor-controlled SPWM technology, it delivers a pure sine wave output, ensuring compatibility with a wide range of electronic devices and appliances. This inverter is ideal for various applications, including portable solar power systems, automotive use, camping, and providing backup power for home or office electronics.
2. Vlastnosti produktu
- Výstup čisté sinusové vlny: Employs MCU microprocessor-controlled SPWM technology for a pure sine wave output, ensuring clean power that is safe for sensitive electronics and appliances, preventing interference.
- Dynamic Current Loop Control: Unique dynamic current loop control technology guarantees reliable and stable operation of the inverter.
- Strong Load Adaptability: Capable of handling various load types, including inductive loads (e.g., refrigerators, freezers, induction cookers), capacitive loads, resistive loads, and mixed loads.
- Komplexní ochranné funkce: Features multiple safety mechanisms including input over-voltage, pod-voltage, overload, overheat, and output short circuit protection.
- LCD displej z tekutých krystalů: An ultra-clear LCD provides real-time monitoring of the inverter's working status, displaying internal temperature, input/output voltage, ochranné symboly, kapacita baterie, provozní stav, výstupní výkon a frekvence.
- Vysoká účinnost konverze: Achieves a high conversion efficiency of up to 90-95%, minimizing power loss and extending battery life.
- Připomenutí bzučákem: An audible buzzer alerts users immediately when a protection mechanism is triggered, indicating the inverter has entered protection mode and shut off power to the load.
- Multiple Output Interfaces: Equipped with two European plugs for simultaneous use of two electrical appliances, a TYPE-C interface, a USB QC3.0 interface, and two USB 2.1A interfaces for diverse charging needs.
- Pohodlné dálkové ovládání: Includes a remote controller with Bluetooth connectivity, allowing for convenient inverter operation without manual intervention.
3. Bezpečnostní informace a upozornění
Před instalací nebo provozem měniče si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.
- Profesionální instalace: Installation and commissioning of this equipment should only be carried out by qualified electrical maintenance personnel who are familiar with the unit's structure and operational hazards.
- Podmínky prostředí: Keep the inverter away from water. Avoid any liquids dripping onto or gradually entering the machine. Do not handle the inverter or its connections with wet hands.
- Flammable Substances: Ensure the inverter is kept away from flammable substances or areas where flammable gases may accumulate.
- Vysoký objemtage Varování: Vysoký objemtage is present inside the inverter. Do not attempt to open or service the machine yourself.
- Vypnutí, když se nepoužívá: Always switch off the inverter when it is not in use to prevent accidental operation or power drain.
- Correct Input Connection: Never connect the inverter's input in reverse polarity or connect it directly to grid-connected power. Incorrect connections will lead to fuse blowing and can cause permanent damage to the inverter's circuit board.
4. Nastavení a instalace
4.1 Požadavky na životní prostředí
- Prostředí: The installation environment must be dry, clean, and well-ventilated.
- Pracovní teplota: Měnič je navržen pro provoz v teplotním rozsahu -20 °C až 80 °C.
4.2 Pokyny pro připojení
- Připojení baterie: Ensure the inverter is securely connected to your 12V DC power source (e.g., battery) with correct polarity. Connect the red cable to the positive (+) terminal of the inverter and the battery, and the black cable to the negative (-) terminal of the inverter and the battery.
- Kabeláž: Always use the original connecting cables provided with the inverter to ensure optimal performance and safety.
- Větrání: Do not cover the inverter. Ensure there is adequate space around the unit for proper airflow and heat dissipation.
5. Návod k obsluze
5.1 Zapnutí/vypnutí
- Připojte ke zdroji napájení: Ensure the inverter is securely connected to your 12V DC power source (e.g., battery) with correct polarity.
- Zapnout: Locate the power switch on the inverter (refer to Figure 4) and switch it to the "ON" position. The LCD display will illuminate, showing the current ambient temperature as part of the power-on sequence.
- Připojení spotřebičů: Plug your AC appliances into the European sockets or use the USB ports for charging. Ensure the total power consumption of connected devices does not exceed the inverter's rated continuous power.
- Vypnout: Before disconnecting any appliances or the inverter from its power source, switch the power button to the "OFF" position.
5.2 Pokyny k zobrazení
The LCD liquid crystal display provides crucial information about the inverter's status:
- Displej při zapnutí: Upon startup, the display shows the current ambient temperature.
- Nízký objemtage ochrana: Pokud je vstupní objtage drops below the applicable range (e.g., 10V for a 12V system), the inverter will trigger low-voltage protection and stop output. The display will show "9.9V 1500W" (example for 1500W model).
- High-Voltage ochrana: Pokud je vstupní objtage exceeds the applicable range (e.g., 15V for a 12V system), high-voltage protection will be triggered. The display will show "15.2V 1500W" (example for 1500W model).
- Ochrana proti vysoké teplotě: If the inverter's internal temperature becomes too high, it will enter high temperature protection, and the display will show "12.2V 1500W" (example for 1500W model) along with a temperature icon. The inverter will not operate normally under these conditions.
- Ochrana proti zkratu: In case of a fault in the electrical appliance or load circuit, short-circuit protection will activate. The display will show "AC -SC" and "0W".
- Ochrana proti přetížení: If the connected load power exceeds the inverter's rated value, overload protection will be triggered. The display will show "AC 220V 1600W" (example for 1500W model with 1600W load).
6. Údržba
- Udržujte čisté a suché: Regularly clean the exterior of the inverter with a dry cloth. Ensure no dust or debris accumulates in the ventilation openings.
- Zajistěte ventilaci: Periodically check that the inverter's cooling fans and air ducts are unobstructed to maintain optimal heat dissipation.
- Kontroly připojení: Inspect all electrical connections (battery terminals, output sockets) for tightness and corrosion. Loose connections can lead to power loss or overheating.
- Skladování: If storing the inverter for an extended period, ensure it is kept in a dry, cool, and well-ventilated area, disconnected from any power source.
7. Řešení problémů
If the inverter is not functioning correctly, refer to the LCD display for error messages and consult the following table:
| Problem Indication (LCD / Buzzer) | Možná příčina | Řešení |
|---|---|---|
| "9.9V 1500W" (Low Voltage) | Baterie voltage je příliš nízké. | Recharge or replace the battery. Ensure the battery is fully charged before use. |
| "15.2V 1500W" (High Voltage) | Baterie voltage je příliš vysoké. | Check the charging system or battery condition. Disconnect the inverter immediately if voltage je nestabilní. |
| Temperature icon / "12.2V 1500W" (High Temperature) | Inverter is overheating due to poor ventilation or excessive load. | Ensure adequate ventilation around the inverter. Reduce the connected load. Allow the inverter to cool down. |
| "AC -SC" (Short Circuit) | Short circuit in the connected appliance or wiring. | Disconnect all loads. Check appliances and wiring for faults. Reconnect one by one to identify the faulty device. |
| "AC 220V 1600W" (Overload) | Total power consumption of connected devices exceeds inverter's capacity. | Reduce the number or power of connected appliances. Ensure total load is within the inverter's continuous power rating. |
| No display / No power output | No input power, loose connections, or internal fault. | Check battery connections and charge level. Ensure power switch is ON. If problem persists, contact support. |
8. Specifikace
| Funkce | DN-022 (1000W Model) | DN-023 (1500W Model) |
|---|---|---|
| Model produktu | DN-022 | DN-023 |
| Output Power (Continuous) | 1000W | 1500W |
| Metoda zobrazení | LCD displej z tekutých krystalů | |
| Vstupní objemtage | 12V/24V | |
| Vstupní objemtage Dosah | 12 V (10-15 V) | 24 V (20-30 V) |
| Nízký objemtage Ochrana | 10V | |
| Přepětítage Ochrana | 15V | |
| Proud bez zátěže | 0.7A | 0.8A |
| Výstupní objemtage | 230V | |
| Výstupní frekvence | 50Hz/60Hz | |
| Výstupní průběh | Čistá sinusová vlna | |
| Ochrana proti přehřátí | 80 °C ± 5 °C | |
| Účinnost konverze | ≥90 % | |
| Způsob chlazení | Built-in Air-Cooled Fan | |
| Celkový rozměr | 31*12*6.4cm (12.1*4.7*2.5 inches) | |
| Hmotnost produktu | 1.9 kg | 2.3 kg |
9. Uživatelské tipy
- Sledujte displej: The inverter features a clear LCD display. Regularly check it for real-time status updates on voltage, power, and any active protection warnings. This helps in proactive troubleshooting.
- Všestranný výkon: With multiple output options including European AC sockets, USB QC3.0, and standard USB 2.1A ports, this inverter can power a wide array of devices simultaneously. Plan your connections to stay within the continuous power limit.
- Pohodlí na dálku: Utilize the Bluetooth remote control feature for easy power management, especially when the inverter is installed in a less accessible location.
10. Záruka a podpora
For any technical assistance, warranty claims, or support inquiries, please contact the manufacturer or seller directly using the information below:
- Mobil/WeChat/Whatsapp/LINE: +8613783531376 XNUMX XNUMX XNUMX
- E-mail: Manager@xdatou.com
Uschovejte si prosím doklad o koupi pro účely záruky.
