Zavedení
This manual provides detailed instructions for the Okin Model RF.27.19.02 Remote Hand Control Handset. This remote is designed as a direct replacement for compatible GhostBed adjustable beds. Please read this manual thoroughly before setup and operation to ensure correct usage and to maximize the lifespan of your device. This remote is specifically for GhostBed adjustable beds and is not compatible with other brands.
Pokyny pro nastavení
1. Instalace baterie
- Najděte přihrádku na baterie na zadní straně dálkového ovladače.
- Posuňte kryt baterie dolů a otevřete jej.
- Insert two (2) AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Batteries are not included and must be purchased separately.
- Nasaďte kryt baterie zpět jeho zasunutím zpět na místo, dokud bezpečně nezacvakne.
2. Spárování dálkového ovladače
To ensure proper communication with your adjustable bed, the remote control may need to be paired. The exact pairing procedure can vary slightly depending on your specific GhostBed adjustable bed model. Generally, the steps involve:
- Ensure the adjustable bed is plugged into a working power outlet.
- Locate the control box under your adjustable bed. There is usually a small button on the control box, often labeled "PAIR" or "LEARN".
- Press and hold the "PAIR" or "LEARN" button on the control box for a few seconds until an indicator light (if present) starts flashing.
- Within 10 seconds, press and hold the "PAIR" button on your Okin RF.27.19.02 remote control (located at the top right of the remote, next to the lock icon).
- Release the button on the remote when the indicator light on the control box stops flashing or when the bed responds to a command.
- Otestujte funkce dálkového ovladače, abyste se ujistili o úspěšném párování.
If pairing is unsuccessful, repeat the steps. If issues persist, consult your GhostBed adjustable bed's original manual for specific pairing instructions or contact GhostBed customer support.
Návod k obsluze
Familiarize yourself with the buttons on your Okin RF.27.19.02 remote control. A visual guide is provided below:
Funkce tlačítek:
- Zamknout/Odemknout: Locks or unlocks the remote to prevent accidental adjustments.
- PÁR: Used for pairing the remote with the adjustable bed's control box (refer to Setup Instructions).
- M (paměť): Saves or recalls a custom bed position. Consult your bed's manual for specific memory programming steps.
- ZG (Nulová gravitace): Adjusts the bed to the Zero Gravity position, which elevates the head and feet to promote circulation and relieve pressure.
- TELEVIZE: Adjusts the bed to a comfortable position for watching TV.
- Hlava nahoru/dolů: Raises or lowers the head section of the bed.
- Noha nahoru/dolů: Raises or lowers the foot section of the bed.
- Byt: Vrací postel do zcela vodorovné polohy.
- MASSAGE (10min, 20min, 30min): Activates the massage function for the selected duration.
- MASSAGE (Head, Foot): Controls the massage intensity or pattern for the head or foot section.
- MASSAGE (MODE): Cycles through different massage modes or patterns.
- ON/OFF: Powers the massage function on or off.
- ČASOVAČ: Sets a timer for the massage function.
Press and hold the desired adjustment buttons until the bed reaches your preferred position. Release the button to stop movement.
Údržba
Výměna baterie
When the remote's performance degrades or the indicator light (if any) signals low battery, replace the AAA batteries. Follow the battery installation steps in the "Setup Instructions" section.
Čištění
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, aerosols, or harsh chemicals, as these can damage the remote's electronics or finish.
Skladování
Store the remote in a dry place away from extreme temperatures and direct sunlight. If storing for an extended period, it is recommended to remove the batteries to prevent leakage.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Remote not responding to commands. |
|
|
| Bed only performs some functions. |
|
|
| Masážní funkce nefunguje. |
|
|
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | RF.27.19.02 |
| Značka (vzdálený výrobce) | Okin |
| Typ motoru | Stejnosměrný motor |
| Zdroj napájení | 2 x AAA baterie (nejsou součástí balení) |
| Kompatibilita | GhostBed Adjustable Beds (specific models) |
| Osvědčení | UL |
| Datum výroby | 38/22 |
| Verze softwaru | 3.0 |
| FCC ID | PCU-RF27 |
| IC | 21319-RF27 |
Tipy pro uživatele
- Always verify the model number (RF.27.19.02) on your existing remote or bed's control box before purchasinvýměna ga pro zajištění kompatibility.
- Keep a spare set of AAA batteries on hand to avoid interruptions in bed operation.
- If your bed has a "Flat" button on the base or control box, you can use it as an alternative to the remote if the remote is lost or not functioning.
- For optimal signal, ensure there are no large metal objects or other electronics directly between the remote and the bed's control box.
Záruka a podpora
For specific warranty information regarding your Okin Model RF.27.19.02 Remote Hand Control Handset, please refer to the documentation provided at the time of purchase or contact the seller directly. Warranty terms may vary.
If you encounter issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact the retailer from whom you purchased this product. For issues related to your GhostBed adjustable bed itself, please contact GhostBed customer support.
