Leclstar 616 LED Solar Street Light User Manual

1. Úvod

Thank you for choosing the Leclstar 616 LED Solar Street Light. This product is designed to provide efficient, bright, and secure outdoor lighting for various applications such as front doors, pathways, gutters, porches, barns, yards, gardens, driveways, fences, walls, stairways, landscapes, and patios. Featuring a high-efficiency solar panel, motion sensor, and multiple lighting modes controllable via remote, this light offers convenience and energy savings.

2. Bezpečnostní informace

• Ujistěte se, že je výrobek bezpečně nainstalován, aby nedošlo k jeho pádu.
• Do not disassemble or modify the product, as this may void the warranty and pose safety risks.
• Udržujte solární panel čistý, abyste zajistili optimální účinnost nabíjení.
• Avoid placing the light near heat sources or in areas with flammable materials.
• This product is designed for outdoor use and is IP65 waterproof, but avoid submerging it in water.

3. Obsah balení

Zkontrolujte prosím balení, zda jsou přítomny všechny komponenty:

• Leclstar 616 LED Solar Street Light Unit(s)
• Dálkové ovládání
• Montážní držák(y)
• Montážní šrouby a kotvy

Image: Leclstar 616 LED Solar Street Light units and remote control.

4. Specifikace

5. Nastavení a instalace

5.1 Počáteční nastavení

• Before first use, ensure the solar light is fully charged. Place the light in direct sunlight for at least 6-8 hours.
• Turn on the light using the ON/OFF button on the unit or the remote control.

5.2 Montážní pokyny

1. Vyberte místo, které přijímá ampPro optimální nabíjení vystavujte přímému slunečnímu záření po celý den.
2. Ensure the chosen surface is sturdy enough to support the light.
3. Attach the mounting bracket to the desired surface using the provided screws and anchors.
4. Slide the solar light unit onto the mounting bracket. The bracket allows for an adjustable angle to direct the light as needed.

Image: Easy installation and adjustable bracket angle for optimal light direction.

Image: Efficient charging solar panels made from high-quality crystalline silicon material.

6. Návod k obsluze

6.1 Zapnutí/vypnutí napájení

The light can be turned ON or OFF using the button on the unit or the remote control.

6.2 režimy osvětlení

The solar street light features 3 distinct lighting modes, selectable via the remote control:

• Mode 1 (Motion Sensor Full Brightness): The light remains OFF until motion is detected. Upon detection, it illuminates at full brightness for approximately 30 seconds, then turns OFF again.
• Mode 2 (Dim Light + Motion Sensor Full Brightness): The light stays on at a dim level in darkness. When motion is detected, it switches to full brightness for approximately 30 seconds, then returns to dim light.
• Mode 3 (Constant Light): The light automatically turns on at approximately 70% brightness in darkness and stays on continuously until dawn or battery depletion.

Image: Visual explanation of the three lighting modes: Motion sensor off, motion sensor dim, and auto mode (constant light).

6.3 Funkce pohybového senzoru

The integrated PIR motion sensor has a detection range of 10-20 feet and a 120-degree wide angle. It activates the light according to the selected mode when movement is detected within its range.

Image: PIR motion sensing system detects movement and automatically lights up.

Image: Solar charging for 6-8 hours, motion detection range of 3-5 meters and 120 degrees, and remote control functionality.

7. Údržba

• Čištění: Solární panel pravidelně otírejte měkkým hadříkemamp hadříkem odstraňte prach, nečistoty nebo úlomky, které by mohly omezit účinnost nabíjení.
• Umístění: Periodically check that the light's placement still receives maximum direct sunlight, especially after seasonal changes or new foliage growth.
• Baterie: The integrated lithium battery is designed for long-term use. If the light's performance significantly degrades over time, ensure the solar panel is clean and receiving adequate sunlight.

Image: The light is IP65 waterproof, offering protection against rain and outdoor elements.

8. Řešení problémů

• Světlo se v noci nerozsvítí:
  • Ensure the light is switched ON.
  • Verify the solar panel is clean and receiving direct sunlight for at least 6-8 hours during the day.
  • Check if the light is installed in a location with too much ambient light, which might prevent it from activating.
• Světlo je tlumené nebo svítí jen krátkou dobu:
  • The battery may not be fully charged. Ensure the solar panel gets sufficient direct sunlight.
  • Pro maximalizaci účinnosti nabíjení vyčistěte solární panel.
  • Extrémně chladné počasí může ovlivnit výkon baterie.
• Nefunkční senzor pohybu:
  • Ensure the light is in Mode 1 or Mode 2.
  • Check for obstructions blocking the sensor's field of view.
  • Test the sensor by moving within its detection range.

9. Uživatelské tipy

• For best performance, install the solar light in an unshaded area where it can receive at least 6-8 hours of direct sunlight daily.
• Experiment with the different lighting modes to find the one that best suits your security and illumination needs. Mode 1 is ideal for pure motion-activated security, while Mode 2 provides a constant low light with a bright burst, and Mode 3 offers continuous ambient lighting.
• Utilize the adjustable bracket to angle the solar panel towards the sun and the light head towards the area you wish to illuminate.

10. Záruka a podpora

This Leclstar 616 LED Solar Street Light comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

For technical support, warranty claims, or any questions regarding your product, please contact your retailer or the manufacturer's customer service.