Přenosná Wi-Fi fototiskárna HPRT CP4100 – návod k obsluze

1. Úvod

The HPRT CP4100 is a portable photo printer designed for high-quality 4x6 inch photo printing. Utilizing advanced dye sublimation technology, it delivers vibrant, detailed, and long-lasting prints with a resolution of 300 DPI. With seamless Bluetooth and Wi-Fi connectivity, it allows for quick and easy printing directly from your iOS or Android devices via a dedicated mobile application. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your HPRT CP4100 photo printer.

2. Průvodce nastavením

2.1 Vybalení a obsah balení

Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda máte následující položky:

• Fototiskárna HPRT CP4100
• Napájecí adaptér
• Photo Paper Pack (e.g., 54 or 108 sheets)
• Color Ribbon Cartridge(s)
• Návod k použití (tento dokument)

2.2 Installing Consumables (Paper and Ribbon)

The HPRT CP4100 uses specific photo paper and ribbon cartridges for dye sublimation printing. Ensure you use official HPRT consumables for optimal print quality.

1. Open the paper tray cover on the front of the printer.
2. Load the photo paper into the paper tray with the glossy side facing up. Ensure the paper stack is neatly aligned.
3. Jemně zatlačte zásobník papíru zpět do tiskárny, dokud nezacvakne na místo.
4. Open the ribbon cartridge compartment cover, usually located on the side or back of the printer.
5. Insert the color ribbon cartridge into the designated slot. Ensure it is securely seated.
6. Close the ribbon cartridge compartment cover.

2.3 Připojení napájení

Connect the power adapter to the printer's power input port, then plug the adapter into a standard electrical outlet.

2.4 Stažení aplikace a připojení

To operate the printer, you need to download the official HPRT mobile application.

1. Scan the QR code provided in the packaging or search for the 'HPRT Photo' app on your device's app store (iOS App Store or Google Play Store).
2. Nainstalujte si aplikaci na smartphone nebo tablet.
3. Turn on the HPRT CP4100 printer.
4. Open the HPRT Photo app on your device.
5. Follow the in-app instructions to connect the printer via Bluetooth or Wi-Fi. Ensure your device's Bluetooth and/or Wi-Fi is enabled.

3. Návod k obsluze

3.1 Printing Photos from the App

Once connected, you can easily print photos from your mobile device.

1. Open the HPRT Photo app.
2. Select the photo(s) you wish to print from your device's gallery.
3. Utilize the app's built-in editing features, such as filters, cropping, and color adjustments, to enhance your photos.
4. Potvrďte nastavení tisku (např. počet kopií).
5. Tap the print button to send the photo to the printer.

3.2 AR Photo Feature

The HPRT CP4100 supports AR (Augmented Reality) photos, allowing you to embed meaningful videos within your printed photos.

• Within the HPRT Photo app, select the AR Photo option.
• Choose a video to link with your photo.
• Print the photo. When viewed through the app, the embedded video will play, bringing your memories to life.

3.3 Built-in Templates

The app includes multiple built-in templates for various document sizes, including passport and visa photos, making it easy to print specific formats without leaving your home.

4. Údržba

4.1 Čištění tiskárny

To ensure optimal performance and print quality, regularly clean the exterior of your printer.

• Před čištěním tiskárnu vypněte a odpojte ze zásuvky.
• K otření vnějších povrchů použijte měkký, suchý hadřík, který nepouští vlákna.
• Avoid using abrasive cleaners, solvents, or alcohol, as these can damage the printer's finish.
• Do not spray cleaning liquids directly onto the printer.

4.2 Výměna spotřebního materiálu

When the photo paper or ribbon cartridge runs out, replace them as follows:

• Replacing Photo Paper: Open the paper tray cover, remove any remaining paper, and load a new stack of HPRT official photo paper.
• Replacing Ribbon Cartridge: Open the ribbon compartment cover, remove the used cartridge, and insert a new HPRT official color ribbon cartridge.

5. Řešení problémů

If you encounter issues with your HPRT CP4100 printer, refer to the following common troubleshooting steps:

5.1 Tiskárna se nepřipojuje

• Ujistěte se, že je tiskárna zapnutá a v dosahu vašeho mobilního zařízení.
• Verify that Bluetooth and/or Wi-Fi is enabled on your mobile device.
• Restartujte tiskárnu i mobilní zařízení.
• Try reconnecting through the HPRT Photo app.

5.2 Špatná kvalita tisku

• Check if the ribbon cartridge is correctly installed and has sufficient ribbon remaining.
• Ensure the photo paper is loaded correctly and is not damaged or creased.
• Use only HPRT official photo paper and ribbon for best results.
• The dye sublimation process ensures high quality; if issues persist, contact support.

5.3 Zaseknutí papíru

• Okamžitě vypněte tiskárnu.
• Carefully open the paper tray and ribbon compartment.
• Gently remove any jammed paper or ribbon. Avoid tearing the paper.
• Ensure the paper is loaded correctly and not overfilled before restarting.

6. Specifikace

7. Uživatelské tipy

• Keep Consumables Stocked: Always have spare photo paper and ribbon cartridges on hand to avoid interruptions during printing.
• Aktualizace aplikací: Regularly check for updates to the HPRT Photo app to ensure you have the latest features and bug fixes.
• Photo Storage: Store your printed photos in a photo album or frame to protect them from dust, moisture, and direct sunlight, preserving their quality for years.
• Kreativní využití: Experiment with the app's editing features and templates to create personalized photo albums, scrapbooks, or unique gifts.

8. Záruka a podpora

For warranty information, technical assistance, or any product-related inquiries, please refer to the official HPRT webwebu nebo se obraťte přímo na jejich zákaznickou podporu. Uschovejte si účtenku jako doklad o koupi pro případné reklamace.