1. Konec produktuview
The XSDTS Smart Door Lock Handle (Model FT001) is an advanced security solution designed for modern homes and offices. It offers multiple convenient and secure ways to unlock your door, integrating seamlessly with smart home ecosystems like Tuya. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and security.
Klíčové vlastnosti:
- Multiple Unlocking Methods: Fingerprint, Password, Mobile App (Tuya Smart), IC Card, and Mechanical Key.
- High Recognition Rate: Fingerprint recognition up to 99.8% accuracy, unlocking in approximately 0.3 seconds.
- Easy Installation: Designed for standard doors, no complex wiring or drilling required.
- Adjustable Handle Direction: Compatible with both left-handed and right-handed doors.
- Emergency Power: USB Type-C interface for emergency charging and mechanical key backup.
- Security Features: Virtual password for enhanced security, security alarm for tampering.
- Smart Home Integration: Tuya Bluetooth connectivity (optional WiFi Gateway for remote access).
2. Obsah balení
Před zahájením instalace se prosím ujistěte, že jsou všechny komponenty přítomny:
- Front Handle Assembly (with fingerprint sensor and keypad)
- Sestava zadní rukojeti
- Mortise/Latch
- Úderová deska
- Šrouby a montážní materiál
- Mechanické klíče (2 ks součástí balení)
- IC Cards (quantity may vary, typically 2-3)
- User Manual (English language instructions)
- 4x AAA Batteries (may be included)
3. Instalační příručka
The XSDTS Smart Door Lock is designed for easy installation on standard doors without the need for complex wiring or drilling. Please follow these steps carefully.
3.1 Door Compatibility and Preparation
- Tloušťka dveří: Suitable for doors with a thickness of 35-70mm.
- Typ dveří: Compatible with wooden, stainless steel, bronze, double, and old-fashioned security doors.
- Směr rukojeti: The handle direction is reversible and compatible with both left-open and right-open doors.
3.2 kroky instalace
- Nainstalujte západku: Insert the latch into the door edge and secure it with screws. Ensure the latch is oriented correctly for your door's opening direction. The latch backset is adjustable to 60mm or 70mm.
- Pass Connecting Wire: Pass the connecting wire from the front handle through the latch mechanism and the door hole to the inside.
- Install Front Handle: Position the front handle assembly on the exterior side of the door, aligning it with the latch.
- Install Rear Handle and Connect Wire: On the interior side, connect the wire from the front handle to the rear handle assembly. Carefully tuck the wire into the designated channel.
- Bezpečné rukojeti: Tighten the outer screw to secure both handle assemblies to the door.
- Nainstalujte baterie: Open the battery compartment on the rear handle. Insert 4 AAA batteries, ensuring correct polarity.
- Zavřete přihrádku na baterie: Cover the battery box securely.
4. Návod k obsluze
4.1 Metody odemykání
The XSDTS Smart Door Lock offers five ways to unlock:
- Odemknutí otisků prstů: Place your registered finger on the sensor. The lock will verify your fingerprint in approximately 0.3 seconds.
- Odemknutí heslem: Enter your registered password on the keypad.
- Odemknutí IC karty: Swipe your registered IC card over the card reader area.
- Odemknutí mobilní aplikace: Use the Tuya Smart app on your smartphone to unlock the door via Bluetooth.
- Mechanické odemknutí klíčem: In case of emergency or power failure, use the provided mechanical key to unlock the door.
4.2 Pokročilé funkce
- Virtuální heslo: To enhance security, you can enter any random numbers before and after your correct password. Only the continuous correct password in the middle will unlock the door.
- Režim průchodu: Enable pass mode to unlock the door without requiring a password, fingerprint, or card. This is useful for temporary access or high-traffic periods.
- Temporary Password (App): Generate one-time temporary passwords remotely via the Tuya Smart app and share them with guests or service providers.
- Inteligentní indikátor LED: The LED indicator shows the lock status (enabled, verify successfully, verify failed).
- Bezpečnostní alarm: The lock features a security alarm that triggers if the password is entered incorrectly multiple times or if the lock is tampered s.
4.3 Tuya Smart App Integration
The lock connects to the Tuya Smart app via Bluetooth. For remote control and advanced features (like remote temporary password generation), a Tuya WiFi Gateway is required (sold separately).
5. Údržba
- Výměna baterie: The lock requires 4 AAA batteries. When the battery is low, the lock will provide a reminder. Replace all four batteries simultaneously with new alkaline 1.5V AAA batteries.
- Nouzové napájení: If the batteries completely drain, you can use a power bank connected via the USB Type-C emergency charging port to temporarily power the lock and unlock it. Alternatively, use the mechanical key.
- Čištění: Clean the lock surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
- Snímač otisku prstu: Pro optimální výkon udržujte snímač otisků prstů čistý a suchý.
6. Řešení problémů
- Zámek nereaguje: Check battery levels. If low, replace batteries or use emergency USB power.
- Otisk prstu nebyl rozpoznán: Ujistěte se, že máte prst čistý a suchý. Pokud problém přetrvává, zkuste otisk prstu znovu zaregistrovat.
- Heslo nefunguje: Double-check the entered password. Ensure you are not accidentally triggering the virtual password feature incorrectly.
- Problémy s připojením k aplikaci: Ensure Bluetooth is enabled on your phone and the lock is within range. For remote access, verify your Tuya WiFi Gateway is properly connected and configured.
- Handle direction needs adjustment: Refer to Section 3.1 and Figure 3 for instructions on adjusting the set screw to change the handle direction.
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Název značky | XSDTS |
| Číslo modelu | FT001 (XSDTS Model F2) |
| Způsoby odemčení | Fingerprint, Password, IC Card, Mechanical Keys, App (Tuya Bluetooth) |
| Typ otisku prstu | Polovodič |
| Rychlost rozpoznávání | 0.3 sekund |
| Kapacita otisků prstů | 50 fingerprints (First three are administrators) |
| Kapacita hesla | 100 sets of passwords |
| Hlavní materiál | Hliníková slitina |
| Napájení | 4pcs AAA battery (alkaline 1.5V batteries) |
| Rozhraní napájení | Type-C interface (for emergency charging) |
| Pracovní svtage | 4 ks AAA baterií |
| Pracovní teplota | -20 °C ~ 50 °C |
| Úroveň ochrany | No Waterproof (Indoor use recommended) |
| Konektivita | Bluetooth (Tuya Smart App) |
| Platforma chytré domácnosti | Tuya |
| Způsob instalace | Instalace vrtání |
| Tloušťka dveří | 35-70 mm |
| Vhodný typ dveří | Wooden, Stainless Steel, Bronze, Double, Old-fashioned Security Doors |
| Směr rukojeti | Direction Reversible (Left Open and Right Open All compatible) |
| Jazyk | Anglický hlas a nabídka |
| Osvědčení | CE |
8. Uživatelské tipy
- Card Unlocking: The lock supports IC card unlocking. Typically, 2-3 cards are included with the lock. Ensure they are properly registered through the app or lock interface.
- Venkovní použití: The product is listed as "No Waterproof". It is recommended for indoor use or in areas protected from direct weather exposure to ensure longevity and proper function.
- Dostupnost manuálu: An English language instruction manual is provided to assist with installation and setup.
9. Záruka a podpora
For warranty information and technical support, please refer to the documentation provided with your purchase or contact XSDTS customer service. Keep your purchase receipt as proof of purchase.
