1. Úvod
The Flipsky VX3 Pro is a state-of-the-art 2.4G wireless remote controller engineered for high-performance electric water sports and skateboarding applications, including Efoil, Esurf, and ESK8. This manual provides essential information for the safe and effective operation, setup, and maintenance of your VX3 Pro controller.
2. Klíčové vlastnosti
- 1.8palcový displej s velmi jasným displejem: Provides comprehensive telemetry data.
- Advanced Telemetry: Displays GPS, motor power, real-time MOS tube temperature, and throttle progress bar.
- Široká kompatibilita: Compatible with Flipsky FSESC/FTESC and other VESC and Non-VESC systems.
- Provoz ve dvou režimech: Seamless switching between ESK8 (Electric Skateboard) and E-surf (Electric Surfboard) modes.
- tempomat: Dedicated cruise speed control function for E-surf mode.
- High Waterproof Rating: IP67 for reliable performance in wet conditions.
- Prodloužená životnost baterie: Equipped with a 1500mAh remote battery.
- ESC Failure Reporting: Detects and reports potential ESC failures for timely replacement.
- Flexible Control Modes: Supports PPM and UART controller modes.
- Pohodlné nabíjení: Features wireless magnetic charging.
- Integrated Receiver: VX3 Pro Remote includes a receiver (supports Flipsky non-VESC).
- Možnost aktualizace firmwaru: Supports online firmware upgrades.
- Vylepšená komunikace: Utilizes SX1280 communication module.
- Improved Microcontroller: Features GD32F303CGT6 transmitter microcontroller.
- FTESC ESC UART Protocol: Added support for FTESC ESC UART control protocol.
- Více možností ovládání: Supports UART, PPM, and UART&PPM control modes.
- Intuitive Function Switching: Joystick-based up and down switching control.
- Gear Lock Function: For added safety and control.
- Alarm slabé baterie: Alerts for low battery levels on both skateboards and surfboards.
- Zobrazení celkového počtu najetých kilometrů: Sleduje celkovou ujetou vzdálenost.
- Přizpůsobitelná nastavení: Adjustable wheel diameter (up to 999mm) and default startup gear.
- Configurable Cruise/Reverse: Option to enable/disable cruise mode and reverse function.
- Optimalizovaný výkon: Faster screen refresh rate and data display.
3. Specifikace
| Atribut | Detail |
|---|---|
| Obrazovka displeje | 1.8-inch, Super Clear |
| Telemetrická data | GPS, Motor Power, MOS Tube Temp, Throttle Progress, Real-time Speed, Single Mileage, ESC Real-time Current, ESC Temperature, Putter Throttle Percentage |
| Kompatibilita | Flipsky FSESC/FTESC, VESC, Non-VESC |
| Provozní režimy | ESK8, E-surf (with Cruise Control) |
| Hodnocení voděodolnosti | IP67 |
| Kapacita baterie dálkového ovladače | 1500 XNUMX mAh |
| Režimy ovladače | PPM, UART, UART&PPM |
| Způsob nabíjení | Bezdrátové magnetické nabíjení |
| Komunikační modul | SX1280 |
| Transmitter Microcontroller | GD32F303CGT6 |
| Materiál | Plast |
| Baterie jsou součástí dodávky | Ano |
| Doporučený věk | 14+ let |
| Osvědčení | CE, RoHS |
| Původ | pevninská Čína |
4. Obsah balení
The VX3 Pro controller package typically includes the following items:
- Flipsky VX3 Pro Remote Controller
- Přijímací modul
- Bezdrátová magnetická nabíjecí podložka
- USB nabíjecí kabel
- Receiver Connection Cables (PPM/UART)
- Řemínek na zápěstí
- Přepravní pouzdro
5. Průvodce nastavením
5.1 Dálkový ovladač Overview
Familiarize yourself with the buttons and display on your VX3 Pro remote controller:
- 1.8palcový displej: Shows telemetry data.
- Brake Trigger: Controls braking.
- Spoušť plynu: Ovládá zrychlení.
- Tlačítko zapnutí / vypnutí: Turns the remote on or off.
- Tlačítko nastavení: Přístup k menu a nastavení.
- Charging Sign: Indikuje stav nabíjení.
- Hang Strap: For securing the remote.
5.2 Zapojení přijímače
The VX3 Pro receiver supports both UART and PPM control modes. Choose the appropriate wiring based on your ESC (Electronic Speed Controller).
5.2.1 UART Control Mode
UART control mode supports one-key reverse function and data display, applicable for ESCs based on VESC and FTESC controllers.
Connect the receiver to your VESC/FTESC as follows:
- Receiver VTX1 to VESC RX
- Receiver VRX1 to VESC TX
- Receiver GND to VESC GND
- Receiver 5V to VESC 5V
- BAT+ for battery level detection (optional, connect to main battery positive)
5.2.2 PPM Control Mode
PPM control mode operates without positive and reverse switching functions and is applicable to all ESCs.
Connect the receiver to your ESC using either PPM1 or PPM2:
- Connect Receiver PPM1 or PPM2 to the corresponding PPM input on your ESC.
- Connect Receiver GND to ESC GND.
- Connect Receiver 5V to ESC 5V.
- BAT+ for battery level detection (optional, connect to main battery positive).
For more detailed wiring, refer to the comprehensive diagram below:
5.3 Počáteční párování
Typically, the remote and receiver come pre-paired. If re-pairing is necessary, consult the Flipsky support resources for specific instructions.
6. Návod k obsluze
6.1 Zapnutí/vypnutí
Press and hold the Power On/Off button on the remote to turn it on or off.
6.2 Screen Display Introduction (ESK8 Mode)
The 1.8-inch display provides real-time information. Below is an overview of the display in ESK8 mode:
- Režim UART: Indicates communication protocol.
- Dálková baterie: Úroveň baterie dálkového ovladače.
- Esk8 battery: Electric skateboard battery level.
- Receiver signal: Strength of the wireless connection.
- Speed mode (H/M/L): High, Medium, or Low speed setting.
- Motor steering: Direction of motor rotation.
- Rychlost v reálném čase: Aktuální rychlost v km/h nebo mph.
- Single mileage: Distance traveled in the current session.
- ESC real-time current: Current draw from the ESC.
- ESC temperature: Real-time temperature of the ESC.
- Putter throttle percentage: Current throttle input.
6.3 Mode Switching (ESK8 / E-surf)
The remote allows free switching between ESK8 and E-surf modes. Use the joystick (up and down switching control) to navigate through the menu and select your desired mode. Refer to the remote's on-screen menu for specific navigation.
6.4 Cruise Speed Control (E-surf Mode)
In E-surf mode, the cruise speed control function can be activated. Consult the remote's menu settings to enable and adjust this feature.
6.5 Gear Lock Function
The gear lock function provides an additional layer of control. Activate and manage this feature through the remote's settings menu.
6.6 Úprava nastavení
Access the settings menu using the Setting Button to adjust various parameters:
- Průměr kola: Can be set up to 999mm for accurate speed and mileage readings.
- Default Gear: Modify the default gear at startup.
- Cruise Mode/Reverse Function: Enable or disable these functions as needed.
7. Údržba
7.1 Nabíjení dálkového ovladače
The VX3 Pro remote features wireless magnetic charging. Place the remote on the provided charging pad to initiate charging. Ensure the charging sign on the remote indicates proper connection.
7.2 Voděodolná péče
With an IP67 waterproof rating, the remote is protected against immersion in water up to 1 meter for 30 minutes. However, it is recommended to rinse the remote with fresh water after use in saltwater environments and ensure it is dry before charging or storing.
7.3 aktualizací firmwaru
The remote supports online firmware upgrades. Periodically check the Flipsky official website or app for the latest firmware versions to ensure optimal performance and access to new features. Follow the provided instructions carefully during the upgrade process.
8. Řešení problémů
- ESC Failure Report: The remote can detect and report possible failures of the ESC. If an ESC failure is reported, immediately cease operation and inspect your ESC for issues. Consult your ESC's manual or Flipsky support for diagnostic steps.
- Alarm slabé baterie: The remote will provide a low battery alarm for both the remote itself and the connected skateboard/surfboard battery. Ensure both are adequately charged before use.
- No Display/Unresponsive: Ensure the remote is charged. Try restarting the remote. If issues persist, contact support.
- Problémy s připojením: Ensure the receiver is correctly wired and powered. Re-attempt pairing if necessary. Check for obstructions or interference.
9. Uživatelské tipy
- Kontrola kompatibility: While the VX3 Pro is broadly compatible with VESC and Non-VESC systems, always verify compatibility with your specific Efoil or Esurf model (e.g., Takuma) before extensive use.
- Pravidelné aktualizace firmwaru: Keep your remote's firmware updated to benefit from performance improvements and new features.
- Bezpečná příloha: Always use the provided wrist strap to prevent accidental drops, especially during water sports.
- Správa baterie: Pay attention to the low battery alarms for both the remote and your vehicle to avoid unexpected power loss during operation.
10. Bezpečnostní upozornění
⚠ VAROVÁNÍ: Tento výrobek vás může vystavit chemikáliím včetně ftalátů (DEHP), o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození. Více informací naleznete na www.P65Warnings.ca.gov.
Always operate your electric skateboard or surfboard responsibly and in accordance with local laws and regulations. Wear appropriate safety gear, including helmets and protective clothing, when operating any electric vehicle.
11. Záruka a podpora
For warranty information, technical support, or service inquiries, please contact Flipsky customer service or visit their official webwebu. Uschovejte si účtenku jako doklad o koupi.
