Zavedení
This manual provides essential information for the installation, operation, and maintenance of your KUGOO-M4 Electric Scooter Controller. This intelligent brushless motor controller is designed to provide stable speed and sensitive control for braking and directional changes, enhancing your electric scooter's performance. The robust metal casing protects the internal circuitry from thermal overload, ensuring durability and reliability.
Specifikace
| Funkce | Detail |
|---|---|
| Model | TF-100-EABS |
| Aplikace | For KUGOO M4 10-inch Wheeled Electric Scooters |
| svtage | 48V |
| Proud | 20A |
| Materiál | Aluminum alloy, PCB, Plastic |
| Obsah balení | Řídicí jednotka 1 x |
| Rozměry (přibližně) | Délka: 18 cm, Šířka: 12 cm, Výška: 10 cm |
| Hmotnost (přibližně) | 0.3 kg |
| Původ | pevninská Čína |
Důležitá poznámka: This is a TF-100-EABS controller, not a TF-100-FD-EABS controller. Please verify your scooter's requirements before installation.
Instalace a elektroinstalace
The controller is designed for easy installation. However, due to the complexity of electric scooter wiring, professional installation is recommended if you are unfamiliar with electrical components. Ensure the scooter's power is completely off before beginning any installation.
Obecné zapojeníview:
- Připojení napájení: Connect the main power cables (typically thicker red and black wires) from the scooter's battery to the corresponding terminals on the controller.
- Připojení motoru: Connect the motor phase wires (usually three thicker wires, often blue, green, yellow) from the motor to the controller.
- Vodiče Hallova senzoru: Connect the motor's Hall sensor wires (usually a thinner bundle of five wires) to the controller's Hall sensor port.
- Throttle/Accelerator: Connect the throttle signal wire to the designated throttle input on the controller.
- Brzdové páky: Connect the brake lever wires to the controller's brake input. This enables the EABS braking function.
- Displej/Měřič: Connect the display unit wires to the controller's display port for speed, battery, and other information.
- Další příslušenství: Connect any other accessories such as lights, horn, or power lock according to your scooter's wiring diagram.
Always refer to your specific electric scooter's wiring diagram for precise connection points and color codes. Incorrect wiring can damage the controller or other scooter components.
Obrázek 1: Přední strana view of the controller, showing the model number and main specifications.
Obrázek 2: Shora dolů view of the controller, illustrating the wire connections.
Obrázek 3: Detailní view of the controller's identification label.
Operace
Once correctly installed, the controller operates automatically to manage the electric scooter's motor. It provides a steady speed and sensitive control for braking and directional changes. The TF-100-EABS model supports EABS (Electronic Anti-lock Braking System) functionality, contributing to safer braking performance.
- Zapnutí/vypnutí: The controller powers on/off with the scooter's main power switch.
- Ovládání rychlosti: Regulated via the scooter's throttle mechanism.
- brzdění: Activated by the scooter's brake levers, utilizing the EABS feature for controlled deceleration.
Údržba
Pro zajištění dlouhé životnosti a optimálního výkonu vašeho regulátoru dodržujte tyto pokyny pro údržbu:
- Udržujte v čistotě: Regularly clean the exterior of the controller to prevent dust and debris buildup, which can affect heat dissipation.
- Kontrola připojení: Pravidelně kontrolujte všechna kabelová spojení, abyste se ujistili, že jsou bezpečná a bez koroze. Volná spojení mohou vést k přerušovanému provozu nebo poškození.
- Vyvarujte se přehřátí: While the metal casing is designed to prevent thermal overload, ensure the controller is installed in a location with adequate airflow and not exposed to direct sunlight for prolonged periods.
- Chraňte před vlhkostí: Keep the controller dry and protected from water exposure. Although the casing offers some protection, it is not fully waterproof.
- Fyzické poškození: Avoid physical impacts or dropping the controller, as this can damage internal components.
Odstraňování problémů
If you experience issues with your electric scooter's performance, the controller may be a factor. Here are some general troubleshooting steps:
- Bez napájení:
- Zkontrolujte úroveň nabití baterie.
- Ověřte, zda jsou všechna napájecí připojení k řídicí jednotce bezpečná.
- Inspect the scooter's main power switch and fuses (if any).
- Motor nereaguje:
- Ensure throttle connections are correct and the throttle is functioning.
- Check motor phase wires and Hall sensor wires for proper connection and damage.
- Listen for any unusual sounds from the motor or controller.
- Přerušovaný provoz:
- Inspect all wiring for loose connections or frayed insulation.
- Check for signs of overheating on the controller casing.
- Problémy s brzděním:
- Verify brake lever connections to the controller.
- Ensure brake sensors are clean and functioning correctly.
If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified technician or contact KUGOO customer support for further assistance.
Tipy pro uživatele
- Ověření modelu: Always double-check that you have the correct controller model (TF-100-EABS) for your KUGOO M4 scooter. There are similar models (e.g., TF-100-FD-EABS) that may not be compatible.
- Profesionální instalace: If you are not experienced with electrical work, consider having the controller installed by a professional to avoid damage to the unit or your scooter.
- Ochrana životního prostředí: Protect the controller from extreme temperatures, direct water spray, and excessive humidity to prolong its lifespan.
Záruka a podpora
For warranty information, technical support, or replacement parts for your KUGOO-M4 Electric Scooter Controller (Model: TF-100-EABS), please contact the retailer or the official KUGOO customer service. Ensure you have your purchase details and the controller's model number readily available when seeking support.
