1. Úvod
The V100 OBD2 Code Reader is a versatile and user-friendly diagnostic tool designed for EOBD/OBD2 compliant vehicles. This device allows car owners to quickly and easily diagnose engine-related issues, read and clear Diagnostic Trouble Codes (DTCs), view freeze frame data, check I/M readiness status, and retrieve vehicle information. Its plug-and-play design requires no external battery, drawing power directly from the vehicle's OBD2 interface.
2. Klíčové vlastnosti
- Full OBD II Diagnostic Functions: Read and erase engine fault codes, view freeze frame data, retrieve I/M readiness status, view vehicle information, and perform other OBD2 tests.
- Digitální displej: Clear and accurate 320x240 dpi LCD display for easy reading of diagnostic results.
- Univerzální kompatibilita: Works with all OBD2 compliant vehicles manufactured since 1996.
- Code Definition: Directly displays DTC definitions on screen, eliminating the need for online searches.
- Není potřeba baterie: Powered directly by the vehicle's OBD2 interface.
- Podpora více jazyků: Supports 10 languages including English, German, Dutch, Italian, French, Spanish, Polish, Portuguese, Finnish, and Chinese.
- Odolná konstrukce: Vyrobeno z materiálu ABS.
- CE certifikováno: Splňuje vysoké bezpečnostní a kvalitativní standardy.
3. Obsah balení
Zkontrolujte prosím balení, zda neobsahuje následující položky:
- 1x V100 Car OBD2 Diagnostic Tool
- 1x anglický manuál
4. Specifikace
| Funkce | Specifikace |
|---|---|
| Obrazovka | LCD display, 320x240 dpi |
| svtage Dosah | 8.0 - 18.0 V (powered by vehicle battery) |
| Provozní teplota | 0 °C až 60 °C (32 °F až 140 °F) |
| Skladovací teplota | -20 °C až 70 °C (-4 °F až 158 °F) |
| Materiál | ABS |
| Rozměry (D x Š x V) | 18 cm x 12 cm x 3 cm |
| Hmotnost | 0.221 kg |
| Aktualizace softwaru | Žádný |
| Osvědčení | CE |
| Podporované jazyky | Dutch, English, Finnish, French, German, Italian, Polish, Portuguese, Spanish, Chinese |
5. Kompatibilita s vozidly
The V100 OBD2 Code Reader is designed to work with a wide range of vehicles that support OBD2 protocols. Please review informace o kompatibilitě níže:
5.1 Supported Vehicles
- Americké (USA) vozy: Compatible with Standard OBD2 Cars from 1996 to present (e.g., Chrysler, Ford, GM, Jeep).
- Evropská auta: Compatible with Standard OBD2 Cars from 2003 to present (e.g., Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Volvo, VW, Ford, Jaguar).
- Francouzská auta: Compatible with Standard OBD2 Cars after 2006 (e.g., Citroen, Fiat, Renault, Peugeot).
- Asijská auta: Compatible with Standard OBD2 Cars from 2007 to present (e.g., KIA, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota).
- Čínská auta: Compatible with Standard OBD2 Cars from 2009 to present (e.g., BYD, Chery, Geely, Great Wall, Karry).
5.2 Supported OBD2 Protocols
- SAE J1850 PWM (41.6 Kbaud)
- SAE J1850 VPW (10.4 Kbaud)
- ISO9141-2 (5 baud init, 10.4 kbaud)
- ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
- ISO14230-4 KWP (rychlý start, 10.4 Kbaud)
- ISO15765-4 CAN (11bit ID, 500 Kbaud)
- ISO15765-4 CAN (29bit ID, 500 Kbaud)
- ISO15765-4 CAN (11bit ID, 250 Kbaud)
- ISO15765-4 CAN (29bit ID, 250 Kbaud)
5.3 Non-Supported Vehicles/Functions
Please note that this device primarily offers OBD2 functions and does not include special functions like ABS Reset or Airbag Reset. It may not be compatible with all vehicles, especially those that do not fully support the OBD2 protocol or have specific regional variations. The following vehicle types and models are generally NOT supported:
- Electric cars and Hybrid cars (e.g., Nissan Leaf).
- 24V trucks.
- Ruské vozy: VAZ, UAZ, LADA.
- Ssangyong Actyon (2009-2017), Ssangyong Korando 2.0 TD Diesel (2013-2017), Ssangyong Kyron 2.0 Diesel (2010-2017), Ssangyong Rexton (2011-2017).
- Opel Corsa C, rok výroby 2004, 1.3 CDTI.
- Citroën C4/C5.
- Vozy Chevrolet.
- Renault Logon, Megane, Clio 2.
6. Nastavení a připojení
Follow these steps to connect and power on your V100 OBD2 Code Reader:
- Vyhledejte port OBD2: The 16-pin Data Link Connector (DLC) or OBD2 port is usually located under the dashboard on the driver's side. Refer to the diagram below for common locations.
- Připojení skeneru: Plug the V100's OBD2 connector firmly into the vehicle's DLC.
- Zapněte zapalování: Turn the vehicle's ignition key to the 'ON' position (engine off). The V100 will automatically power on and display the main menu.
| OBD2 Port Area | Typical Vehicle Brands |
|---|---|
| Oblast A | Most models of GM, Volkswagen, Ford, Toyota, Hyundai, Citroen, BMW and other brands |
| Oblast B | Honda, Volkswagen Teramont, imported Lexus and other models |
| Oblast C | Dongfeng Citroen, Dongfeng Peugeot and other small number of vehicles |
| Area D | Dongfeng Citroen and other small number of vehicles |
| Oblast E | Other few vehicles |
7. Návod k obsluze
The V100 features a simple button interface for navigation: EXIT, DTC, OK, and directional Šipky nahoru/dolů.
7.1 Funkce hlavní nabídky
From the Diagnostic Menu, use the Up/Down arrows to navigate and OK vybrat:
- Číst kódy: Displays current, pending, and permanent Diagnostic Trouble Codes (DTCs) along with their definitions. This helps identify the cause of the Check Engine Light.
- Vymazat kódy: Clears all DTCs from the vehicle's computer and turns off the Malfunction Indicator Lamp (MIL). Poznámka: Ensure the underlying issue is resolved before clearing codes, as they may reappear.
- View Freeze Frame: Shows a snapshot of critical vehicle operating conditions (e.g., engine speed, fuel system status, coolant temperature) at the moment a fault code was set.
- Připravenost I/M: Kontroluje stav systémů monitorování emisí vozidla, aby se zjistilo, zda jsou připraveny k provedení emisní zkoušky.
- Informace o vozidle: Retrieves the Vehicle Identification Number (VIN), Calibration ID (CID), and Calibration Verification Number (CVN) of the vehicle.
Nastavení systému 7.2
Access the System Setup menu to configure device settings:
- Jazyk: Select your preferred operating language (English, German, Dutch, Italian, French, Spanish, Polish, Portuguese, Finnish, Chinese).
- Měrná jednotka: Choose between metric or imperial units.
- Kontrast: Adjust the display contrast for optimal visibility.
8. Uživatelské tipy
- Ověřte kompatibilitu: Always double-check the compatibility list for your specific vehicle's make, model, and year before use. If your vehicle is on the 'Not Supported' list (e.g., Renault Clio 2, certain Ssangyong models), the scanner may not function correctly.
- VIN Retrieval: The device can read your vehicle's VIN (Vehicle Identification Number) under the 'Vehicle Information' menu, which can be useful for various purposes.
- Engine Light Diagnosis: If your 'Check Engine Light' is on, use the 'Read Codes' function to identify the issue. Do not immediately clear codes without understanding the problem, as this can mask a serious underlying fault.
- No Software Updates: This model does not support software updates, so its functionality is fixed.
9. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Skener se nezapne | Loose connection; Vehicle ignition off; Vehicle battery low/dead; Vehicle not OBD2 compliant. | Ensure the connector is firmly plugged in. Turn ignition to 'ON' (engine off). Check vehicle battery. Verify vehicle is OBD2 compliant. |
| "LINK ERROR" message | Communication failure; Vehicle not OBD2 compliant; Faulty DLC. | Ensure ignition is 'ON'. Check if the vehicle is OBD2 compliant. Try connecting to another OBD2 compliant vehicle if possible. Inspect the vehicle's DLC for damage. |
| Cannot read codes / "NO DTCs" | No fault codes present; Vehicle not fully compliant; Incorrect menu selection. | If no codes are present, this is normal. Ensure the vehicle is OBD2 compliant. Select 'Read Codes' from the main menu. |
| Codes reappear after clearing | Underlying vehicle issue not resolved. | Clearing codes only resets the warning light. The root cause of the fault must be repaired for codes to stay cleared. |
10. Údržba a skladování
- Čištění: Použijte měkký, damp K čištění zařízení použijte hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Skladování: Store the V100 in a dry, cool place, away from direct sunlight and extreme temperatures. The recommended storage temperature is -20°C to 70°C (-4°F to 158°F).
- Zacházení: S přístrojem zacházejte opatrně, abyste předešli jeho fyzickému poškození.
11. Záruka a podpora
For any questions, technical assistance, or warranty inquiries, please contact the seller or retailer from whom you purchased the V100 OBD2 Code Reader. Keep your purchase receipt as proof of purchase.
12. Často kladené otázky (FAQ)
- Q: Does this device read VIN numbers?
- A: Yes, the V100 can read the Vehicle Identification Number (VIN) under the 'Vehicle Information' menu.
- Q: Is it compatible with my Suzuki Alto 800 year 2019?
- A: The device is generally compatible with Asian cars from 2007 onwards. However, specific models can vary. Please refer to the detailed compatibility list in Section 5 or contact the seller with your vehicle details (make, model, year, engine size, fuel type) for confirmation.
- Q: Will it work with a Mercedes-Benz CLA 200 2017?
- A: The device is compatible with European cars from 2003 onwards, which includes Mercedes-Benz. It should work for your 2017 model.
- Q: Does it support Ford Transit 2005 and Fiat Ducato 2009?
- A: For European cars, compatibility starts from 2003. Therefore, it should support a Ford Transit 2005 and Fiat Ducato 2009, provided they are standard OBD2 compliant.
- Q: Will it work on Renault Clio 2003?
- A: No, the V100 explicitly states that it does not support Renault Clio 2 models.