Mileseey DT11 Laser Measuring Tape User Manual

1. Konec produktuview

The Mileseey DT11 is a versatile 2-in-1 measuring tool, combining a laser distance meter with a traditional retractable tape measure. It is designed for accuracy and ease of use in various applications, from home renovation to professional construction. This device features a high-definition LCD display, multiple measurement modes, and a durable, ergonomic design.

Figure 1: Mileseey DT11 Laser Measuring Tape

Klíčové vlastnosti

• Funkce 2 v 1: Combines a 40m (131ft) laser rangefinder with a 5m (16ft) physical tape measure.
• Vysoká přesnost: Laser measurement accuracy of ±2mm.
• Dobíjecí baterie: Integrated lithium battery, USB rechargeable, providing up to 5 hours of continuous use.
• Magnetický háček: High-quality magnetic hook for stable attachment to metal surfaces.
• Automatic Calculation: Supports automatic calculation for area and volume.
• Převod jednotek: Easily switch between Metric (m/cm) and Imperial (ft/in) units.
• HD LCD Digital Display: Reverse display LCD for clear visibility in various lighting conditions.
• Ochrana IP54: Water-resistant and dustproof for enhanced durability.
• Odolný design: Nylon coating for wear-resistant, non-slip, and drop-resistant performance.

Figure 2: DT11 Key Features

2. Nastavení a nabíjení

Rozbalení

Upon receiving your Mileseey DT11, carefully open the packaging and ensure all components are present:

• Mileseey DT11 Laser Measuring Tape
• USB nabíjecí kabel
• Uživatelská příručka (tento dokument)
• Osvědčení

Počáteční nabíjení

The DT11 is powered by a high-quality rechargeable lithium battery. Before first use, it is recommended to fully charge the device.

1. Vyhledejte nabíjecí port USB na boku zařízení.
2. Connect the provided USB charging cable to the DT11 and a compatible USB power source (e.g., computer, wall adapter).
3. Indikátor baterie na LCD displeji bude zobrazovat stav nabíjení.
4. A full charge typically allows for 5 hours of continuous operation.

Figure 3: DT11 USB Charging Port

Zapnutí/vypnutí

• Zapnutí: Press and hold the 'MEAS' button for a few seconds until the LCD display illuminates.
• Vypnout: Press and hold the 'MEAS' button again for a few seconds. The device also features an auto-off function: the laser will turn off after 30 seconds of inactivity, and the entire device will power off after 180 seconds of suspension to conserve energy.

3. Návod k obsluze

Obecný provoz

Figure 4: DT11 HD LCD Digital Display

• Tlačítko nabídky: Used for switching between different measurement modes (single, area, volume, Pythagoras) and viewing measurement history.
• Tlačítko MĚŘENÍ: Initiates a measurement (single or continuous).
• Tlačítko UNIT: Short press to switch between measurement units (M/In/Ft). Long press to switch the measuring basis (front or rear edge of the device).

Laserové měření

1. Zapnutí: Press the 'MEAS' button to turn on the laser.
2. Jednorázové měření: Aim the laser at the target point and press the 'MEAS' button again. The measured distance will be displayed on the LCD.
3. Průběžné měření: After turning on the laser, press and hold the 'MEAS' button. The device will continuously measure and display the current distance as you move it. Release the button to stop.
4. Režimy měření: Use the 'Menu' button to cycle through modes:
   • Jednorázové měření: Měří jednu vzdálenost.
   • Měření plochy: Measure two sides (length and width), and the device calculates the area.
   • Měření objemu: Measure three sides (length, width, and height), and the device calculates the volume.
   • Pythagoras (2-Point): Used for indirect measurement of height or distance using two measurements.
5. Referenční bod: Long press the 'UNIT' button to switch the measurement reference point between the front and rear of the device. This is crucial for accurate measurements depending on how you position the device.

Figure 5: DT11 Display and Unit Conversion

Tape Measure Usage

The DT11 includes a traditional 5m (16ft) retractable tape measure. Simply pull out the tape to the desired length. The tape features both metric (M/CM) and imperial (ft/in) markings for convenience. The magnetic hook at the end of the tape allows for easy attachment to metallic surfaces, improving stability during measurement.

Figure 6: DT11 in various measurement applications

4. Údržba a péče

• Čištění: Použijte měkký, damp K čištění zařízení použijte hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Skladování: Přístroj skladujte na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
• Péče o baterie: Chcete-li prodloužit životnost baterie, vyvarujte se častého úplného vybíjení. Zařízení pravidelně nabíjejte, i když jej delší dobu nepoužíváte.
• Ochrana: The DT11 has IP54 protection, making it resistant to dust and splashes. However, avoid submerging it in water or exposing it to heavy rain.

Figure 7: DT11 IP54 Protection

5. Řešení problémů

• Zařízení se nezapíná: Ujistěte se, že je baterie nabitá. Připojte k USB zdroji napájení a zkuste to znovu.
• Inaccurate laser measurements: Check the reference point setting (front or rear of the device). Ensure the laser beam is not obstructed and the target surface is suitable for reflection.
• Problémy se zobrazením: If the display is dim or unreadable, ensure the battery is charged. If the issue persists, contact customer support.
• Laser not emitting: Check if the device is powered on. If the laser auto-off function has activated, press 'MEAS' again to reactivate.

6. Specifikace

7. Záruka a podpora

The Mileseey DT11 Laser Measuring Tape is designed for reliability and durability. For detailed warranty information and customer support, please refer to the official documentation provided with your product or visit the manufacturer's webmísto.

Digitální verze uživatelské příručky je k dispozici ke stažení: Mileseey DT11 User Manual (PDF)