1. Úvod
Děkuji za nákupasing the YUER 200W LED Moving Head Light. This professional stage lighting fixture is designed to create dynamic and vibrant lighting effects for various events, including DJ performances, stage shows, discos, and bars. It features powerful beam and spot capabilities, rotating prisms, and a rainbow effect to enhance any atmosphere. Please read this manual thoroughly before operation to ensure safe and optimal performance.
2. Bezpečnostní informace
- Always connect the fixture to a grounded circuit to avoid the risk of electrocution.
- Zajistěte zvtage and frequency of the power supply match the fixture's requirements (AC110-220V, 50-60HZ).
- Nepoužívejte svítidlo, pokud je napájecí kabel poškozený.
- Keep the fixture away from rain, moisture, and extreme temperatures.
- Udržujte minimální vzdálenost 1 metr od hořlavých materiálů.
- Do not look directly into the light source when the fixture is operating.
- Zajistěte řádné větrání kolem zařízení, abyste zabránili přehřátí.
- Only qualified personnel should perform installation, maintenance, or repairs.
3. Konec produktuview
Obrázek 1: Přední strana view of the YUER 200W Moving Head Light.
Obrázek 2: Strana view of the YUER Moving Head Light.
Figure 3: Rear panel showing DMX input/output and power connections.
4. Specifikace
| Funkce | Specifikace |
|---|---|
| svtage | AC110-220V, 50-60HZ |
| Spotřeba energie | 250W (max.) |
| Světelný zdroj | 1x 200W White Light Lamp Korálek |
| Vzory | 12 vzorů |
| Barvy | 8 barev |
| Duhový efekt | 6-color rainbow effect |
| Hranol | 6+12 prism |
| Spot Angle | 2° |
| DMX kanály | 11/13 CH |
| Režimy ovládání | Voice control, Master-slave, Self-propelled, DMX |
| Pan (X-axis) | 540° |
| Tilt (Y-axis) | 180° |
| Světelný tok | 249-2000 |
| Způsob instalace | Samostatný |
| Osvědčení | CE |
| Typ položky | StagSvětelný efekt |
| Příležitost | Profesionální stage a DJ |
| Rozměry (D x Š x V) | 35cm x 26cm x 29cm (Packing Size) |
| Hrubá hmotnost | 3.5 kg |
Figure 4: Product Dimensions (approximate).
5. Obsah balení
Po otevření balení se prosím ujistěte, že jsou všechny součásti přítomny a v dobrém stavu:
- 1x YUER 200W LED Moving Head Light Fixture
- 1x Power Cable (EU/US/AU/UK Plug, depending on selection)
- 1x DMX Cable (optional, may not be included in all packages)
- 1x Návod k obsluze (tento dokument)
6. Nastavení
6.1 Montáž
- The fixture is designed for self-contained installation. Ensure the mounting surface or truss is capable of supporting the fixture's weight (3.5KG).
- Použijte vhodný třampa bezpečnostní lana při montáži nad hlavou.
- Ensure there is sufficient space around the fixture for ventilation and movement (Pan 540°, Tilt 180°).
6.2 Připojení napájení
- Connect the provided power cable to the power input on the rear panel of the fixture.
- Plug the other end of the power cable into a suitable AC110-220V, 50-60HZ power outlet.
- Ensure the power source is stable and grounded.
6.3 DMX Connection (for DMX Control Mode)
- Connect a DMX cable from your DMX controller's output to the DMX IN port on the first fixture.
- For multiple fixtures, daisy-chain them by connecting a DMX cable from the DMX OUT port of the first fixture to the DMX IN port of the next fixture, and so on.
- Terminate the last fixture in the DMX chain with a 120-ohm DMX terminator to prevent signal reflection.
7. Návod k obsluze
The fixture can be operated in several modes:
7.1 Ovládací panel
The control panel on the front of the base features a digital display and several buttons (MENU, UP, DOWN, ENTER) for navigating settings and selecting modes.
7.2 Režim ovládání DMX
- Set the DMX address for each fixture using the control panel. Each fixture requires a unique starting address.
- Refer to the DMX channel chart (usually provided in a separate DMX manual or detailed specification sheet) to understand the functions controlled by each channel (e.g., Pan, Tilt, Color, Gobo, Prism, Strobe).
- Use your DMX controller to send commands and control the light's various features.
7.3 Režim Master-Slave
- Connect multiple fixtures via DMX cables.
- Set one fixture as the 'Master' and the others as 'Slave' units via the control panel settings.
- The Slave units will mimic the Master unit's movements and effects.
7.4 Self-Propelled Mode (Auto Mode)
- Select 'Auto' or 'Self-Propelled' mode from the control panel.
- The fixture will run through a series of pre-programmed light shows and effects automatically.
- Some models may allow adjustment of speed or specific auto programs.
7.5 Voice Control Mode (Sound Active)
- Select 'Sound Active' or 'Voice Control' mode from the control panel.
- The built-in microphone will detect ambient sound, and the light will react to the beat of the music.
- Adjust microphone sensitivity if available.
7.6 Effects Demonstration
Video 1: Demonstration of the YUER Moving Head Light's beam and pattern effects.
Obrázek 5: Přamples of various light patterns and colors produced by the fixture.
Obrázek 6: Více examples of light patterns and colors, including star and circle shapes.
8. Údržba
- Čištění: Regularly clean the lenses and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Inspekce: Periodically check all screws, connections, and cables for tightness and damage. Replace any worn or damaged parts immediately.
- Skladování: Pokud svítidlo nepoužíváte, skladujte jej v suchém a bezprašném prostředí, nejlépe v originálním obalu nebo ochranném pouzdře.
- Lamp Nahrazení: LED lamp bead is designed for long life and typically does not require user replacement. If a fault occurs, contact qualified service personnel.
9. Řešení problémů
- Bez napájení: Check the power cable connection, power outlet, and ensure the fixture is switched on.
- Žádný světelný výkon: Verify the fixture is receiving power and is not in blackout mode. Check DMX signal if applicable.
- Zařízení nereaguje na DMX: Ensure DMX cables are correctly connected, DMX addresses are set correctly, and a DMX terminator is used on the last fixture. Check DMX controller output.
- Erratic Movement/Effects: This could be due to DMX signal interference. Check DMX cabling and termination. Ensure the fixture is not overheating.
- Sound Active Mode Not Working: Check the microphone sensitivity setting. Ensure there is sufficient sound for the fixture to react.
If problems persist, please contact your dealer or a qualified technician.
10. Uživatelské tipy
- Experiment with DMX: For professional results, utilize DMX control to precisely program and synchronize light movements, colors, and effects.
- Optimální umístění: Consider placing multiple units to create layered effects and cover a wider area.
- Atmosférické efekty: Use with a fog or haze machine to enhance the visibility of the light beams and create stunning aerial effects.
11. Záruka a podpora
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For technical support, service, or spare parts, please contact your original point of purchase or the manufacturer's customer service department. Do not attempt to repair the unit yourself, as this may void your warranty.
