Lemorele Wireless HDMI Transmitter & Receiver Extender

1. Úvod

Děkuji za nákupasing the Lemorele Wireless HDMI Transmitter & Receiver Extender. This device allows for seamless, high-definition wireless transmission of video and audio signals from your laptop, smartphone, or tablet to a TV, monitor, or projector. It supports 1080P resolution, 5G high-speed transmission, and features both HDMI and VGA dual ports, making it ideal for conference rooms, home theaters, multimedia education, and live streaming.

Figure 1: Lemorele Wireless HDMI Extender highlighting 5G Wireless, Full 1080P, HDMI & VGA, 50 Meters transmission.

2. Obsah balení

Zaškrtněte prosím políčko u následujících položek:

• 1 x Bezdrátový HDMI vysílač (TX)
• 1 x Bezdrátový HDMI přijímač (RX)
• 1 x Uživatelská příručka
• 1× HDMI kabel (25 cm)
• 2 x Type-C Data Cables
• 1 x napájecí adaptér
• 2 x externí antény

Obrázek 2: Všechny komponenty obsažené v balení produktu.

3. Konec produktuview

Familiarize yourself with the ports and indicators on your transmitter and receiver:

Obrázek 3: Detailní view of the Receiver (RX) and Transmitter (TX) ports and features.

Receiver (RX) Ports:

• 1. Port audio výstupu
• 2. Napájecí port typu C
• 3. Výstupní port HDMI
• 4. VGA Output Port
• 5. Mesh Vent
• 6. Signal Projection Switch

Transmitter (TX) Ports:

• 1. Signal Projection Switch
• 2. Kontrolka napájení
• 3. Napájecí port typu C
• 4. Thermo Vent
• 5. Výstupní port HDMI

Note: The Transmitter (TX) cannot be used independently and must be paired with the Receiver (RX) for operation.

Figure 4: Close-up of the Transmitter (TX) unit, emphasizing its HDMI port and the requirement for pairing with an RX unit.

4. Setup Instructions (Plug & Play)

The Lemorele Wireless HDMI Extender is designed for easy plug-and-play setup without the need for additional drivers or apps.

1. Připojení přijímače (RX): Connect the receiver's HDMI or VGA port to a display device such as a TV, monitor, or projector.
2. Připojení vysílače (TX): Connect the transmitter to your computer or other video output device.
3. Power the Devices: Ensure both the TX and RX units are adequately powered. If the transmitter's indicator light is flashing, its voltage is insufficient. Use the supplied power supply cable to power the transmitter (Power supply voltage: 5V2A).
4. Zahájit párování: Press and hold the function key of the transmitter (TX) for more than 3 seconds. The indicator light of the transmitter will flash rapidly, entering pairing mode.
5. Potvrdit připojení: Wait for the transmitter's indicator light to become solid. A solid light indicates a successful connection and mirroring is active.

Figure 5: Visual guide for connecting the RX to a display and the TX to a source device, followed by the pairing process.

Figure 6: Illustration of powering the transmitter (TX) from both a laptop and a wall adapter, with a crucial note about using a 5V2A power supply if the indicator light flashes.

5. Provozní režimy

5.1 Mirror and Extend Mode

The wireless transmission supports both mirroring and extending your display. You can wirelessly stream 1080P content from your laptop to a single or dual monitor setup. This flexibility is beneficial for presentations, multitasking, or simply enjoying content on a larger screen.

• Zrcadlový režim: Duplikuje obrazovku zdrojového zařízení na připojený displej.
• Rozšířený režim: Expands your desktop workspace across the source device and the connected display.

Note: Mobile phones and tablets typically use mirroring mode, utilizing only the receiver for display.

Figure 7: Visual representation of how the device supports both Mirror and Extend display modes for enhanced productivity and viewIng.

5.2 Multi-Point Free Switching

This kit supports connecting up to 8 transmitters to a single receiver, allowing for easy switching between multiple source devices. This feature is particularly useful in collaborative environments like conference rooms or classrooms.

Figure 8: Illustration of the Multi-Point Free Switching capability, showing multiple users seamlessly sharing their screens to a single display.

6. Řešení problémů

• Žádný signál/Černá obrazovka:
  • Ensure both the transmitter (TX) and receiver (RX) are properly connected and powered on.
  • Verify that the display device is set to the correct HDMI or VGA input source.
  • Check if the transmitter's indicator light is solid. If it's blinking, the power supply might be insufficient. Use the provided 5V2A power adapter.
• Selhání párování:
  • Ensure the TX and RX units are within the effective transmission range (up to 50 meters).
  • If pairing consistently fails, try resetting the receiver to factory settings by pressing and holding the receiver's function button for 10 seconds. Then, attempt the pairing process again.
• Přerušované připojení/zpoždění:
  • Ensure there are no significant obstructions (thick walls, metal objects) between the transmitter and receiver.
  • Minimize interference from other 5GHz Wi-Fi devices.
  • Check the power supply for both units to ensure stable operation.
• Žádný zvuk:
  • Verify that the audio output settings on your source device are correctly configured.
  • If using the RX's audio output port, ensure external speakers or headphones are properly connected.

7. Specifikace

8. Uživatelské tipy

• Zajistěte dostatečné napájení: If your transmitter's indicator light is blinking, it signifies insufficient power. Always use the supplied 5V2A power adapter to ensure stable operation and prevent connection issues.
• Zrcadlení mobilních zařízení: When using mobile phones or tablets, the device will operate in mirroring mode, and only the receiver unit is typically needed for the display connection.
• Optimální umístění: For the best transmission quality and range, try to place the transmitter and receiver with a clear line of sight, minimizing physical obstructions.
• Kompatibilita: The device is compatible with a wide range of applications and services for streaming and presentations.

Figure 9: The device supports a wide range of applications including Hulu, Netflix, Amazon, YouTube, Zoom, and Office.

9. Údržba

• Čištění: K čištění zařízení používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani aerosolové spreje.
• Skladování: Přístroj skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Zacházení: Zabraňte pádu zařízení nebo jeho vystavení silným nárazům.
• Větrání: Ensure the mesh vents on the receiver and thermo vents on the transmitter are not blocked to prevent overheating.

10. Záruka a podpora

For technical support, warranty information, or any inquiries regarding your Lemorele product, please contact us:

• E-mail: podpora@lemorele.com

Podrobný návod k použití ve formátu PDF je také k dispozici ke stažení:

• Stáhnout uživatelskou příručku (PDF)