KEYDIY KD CS01 CS21 CS35 Cloud Key All In One Remote Instruction Manual

1. Úvod

The KEYDIY KD CS01, CS21, and CS35 Cloud Key All-in-One Remotes are versatile devices designed for locksmiths and users to copy and manage various remote controls. These remotes support a wide frequency range and can handle both fixed and rolling codes, making them suitable for a broad array of applications including car keys, garage doors, and electromobiles.

2. Klíčové vlastnosti

• Cloudové úložiště: Use as a tool for locksmiths to save copied remotes to the cloud, preventing data loss.
• Wide Frequency Support: Supports 225-915 MHZ, with automatic cloning after frequency scanning. Frequency can be adjusted directly via a phone APP, eliminating the need for other devices.
• Fixed Code Compatibility: Supports fixed codes such as PT224X, PT226X, HT6P20, VD20 26, EV1527, AX5326, LX918, HT12X, DOOYA, SHARP, and other nonstandard fixed codes.
• Kompatibilita s pohyblivým kódem: Supports rolling codes such as HCS101, HCS30X, HCS361, HCS362, and more. Can operate over 200 different garage doors, electromobiles, and other remotes.

3. Specifikace

Remote Parameter (CS01 Example)

4. Nastavení a provoz

The KEYDIY Cloud Key remotes are designed for easy face-to-face copying. Follow these steps for successful operation.

4.1. Remote Details and Indicator Lights (CS01 Example)

Refer to Figure 4 for visual guidance on button layout and indicator lights.

Tlačítka a kontrolky:

• The CS01 remote has three LED lights (1, 2, 3) to indicate working remote number.
• The middle button (gear icon) is the function button.
• The other four buttons are remote buttons.

4.2. Copying a Remote

4.2.1. Indication or Switch for Activate Working Remote

Press the function button (gear icon). The corresponding activated remote light will flash once. Press the function button again to switch to another remote. Press the function button again to activate the remote.

4.2.2. Copy New Remote

1. Press and hold the button on the old remote.
2. Simultaneously press and hold the corresponding button on the KD Cloud Key.
3. The light will flash, then stay lit, indicating successful copying.
4. Repeat for all buttons.
5. If the light flashes quickly, it means the frequency is not supported or the remote is a rolling code. In this case, use a new KEYDIY remote or the mobile APP to copy the data.

4.2.3. Delete Copied Remote Data

Press and hold the function button for 7 seconds. The light will be off, then on, then off again after 7 flashes. This indicates the data has been deleted. You can then copy a new remote.

4.3. Režim Bluetooth

4.3.1. Enter Bluetooth Mode

Press and hold the function button for 3 seconds. The light will be off, then on, then off again after 7 flashes. This means the remote has entered Bluetooth mode.

4.3.2. Exit Bluetooth Mode

If not connected to the phone, it will exit automatically after 1 minute.

4.4. Cloud Backup and Download

1. To upload the remote to the cloud: Open the Mobile KD app and connect the remote. Select the needed remote in the list to backup.
2. To download from the cloud: Backup users can download remote directly to a new remote.

5. Údržba

• Čištění: Use a soft, dry cloth to clean the remote. Do not use harsh chemicals or abrasive materials.
• SkladováníDálkový ovladač skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Výměna baterie: If the remote's performance degrades, consider replacing the internal battery. Refer to Figure 6 for guidance on accessing the battery compartment.
• Ochrana životního prostředí: Avoid exposure to water, dust, and strong magnetic fields.

6. Řešení problémů (Často kladené otázky)

Q: Failed to clone?

A: If the remote was not cloned, please delete the existing data and try again.

Q: Cloned successfully but remote distance is short?

A: This could be due to several reasons:

1. Frequency effect may be caused by environment, interference, or battery.
2. Zkontrolujte baterii.
3. If the frequency is not correct, adjust it again.

Q: How to clone the rolling code remote?

A: For rolling code remotes, do not use the face-to-face copy method. Instead, use the mobile APP to clone the original remote button until the cloning process is complete.

Q: Failed to connect the Mobile KD app automatically?

A:

1. Make sure the remote is in Bluetooth mode. Hold the functional button for 3 seconds.
2. Zkontrolujte, zda je ve vašem telefonu povoleno Bluetooth.
3. If connection issues persist, please select the "All In One Cloud Remote" option in the Mobile KD app.

7. Uživatelské tipy

• Cloning Rolling Codes: For rolling code remotes, direct face-to-face copying might not work. Always use the mobile APP for these types of remotes to ensure proper cloning.
• Nastavení frekvence: If you experience short remote distance after cloning, verify and adjust the frequency using the phone APP.
• Zálohování dat: Utilize the cloud backup feature to save your copied remote data, preventing loss and allowing easy restoration to new remotes.

8. Videoukázka

Watch this video for a visual guide on the features and operation of the KEYDIY Cloud All-in-One Remote.

9. Záruka a podpora

For any issues or further assistance, please contact your retailer or the manufacturer's support channels. Keep your purchase receipt for warranty claims.

For detailed information on product safety and compliance, refer to the official KEYDIY documentation.