FIFINE BM88 Nízkoprofilovýfile Návod k obsluze ramene mikrofonu

Zavedení

This manual provides comprehensive instructions for the setup, operation, and maintenance of your FIFINE BM88 Low-profile Microphone Boom Arm. Designed for optimal audio recording, this full-metal arm offers stability, flexibility, and integrated cable management to enhance your workspace.

Co je v krabici

Zkontrolujte prosím, zda jsou v balení přítomny všechny komponenty:

• Rameno mikrofonu
• Stůl Clamp
• Rotatable Ball-Head
• Adaptér z 1/4" na 3/8"
• Adaptér z 3/8" na 5/8"
• Imbusový klíč
• Uživatelská příručka

Specifikace

Nastavení

Follow these steps to set up your FIFINE BM88 Microphone Boom Arm:

1. Připevnit stůl Clamp: Zajistěte psací stůl třamp to your desk. Ensure the desk thickness is between 20-60mm (0.8-2.4in). Tighten the clamp firmly to prevent movement.



2. Vložte rameno výložníku: Vložte základnu ramene výložníku do otvoru na stoleamp.
3. Attach Rotatable Ball-Head: Screw the rotatable ball-head onto the end of the boom arm.
4. Držák mikrofonu: Attach your microphone to the ball-head. Use the appropriate 1/4" to 3/8" or 3/8" to 5/8" adapter if your microphone requires it.



5. Správa kabelů: Open the covers on the boom arm's channels, route your microphone cable through them, and then close the covers to secure the cable. This keeps your setup tidy and prevents cable clutter.

Návod k obsluze

The FIFINE BM88 boom arm offers flexible adjustments for optimal microphone positioning:

• Nastavení polohy: The arm allows for 360° horizontal rotation and approximately 200° vertical adjustment. Gently move the arm to your desired position.



• Adjusting Tightness and Load-Bearing: Use the provided Allen wrench to adjust the rotational tightness and load-bearing strength at the arm's joints. This allows you to customize the arm's resistance to movement and ensure it securely holds your microphone.



• Low-Profile Design: The arm is designed to sit below your shoulder line, providing an unobstructed view of your screen and workspace.

Údržba

• Regularly check all connections, especially the desk clamp and microphone mount, for tightness to ensure stability.
• Wipe the arm with a soft, dry cloth to remove dust and debris.
• Avoid using harsh chemicals or abrasive materials that could damage the finish or moving parts.

Odstraňování problémů

• Microphone shaking or dropping: Zajistěte stůl třamp is securely tightened to the desk. Adjust the rotational tightness of the arm joints using the Allen wrench to increase resistance. Verify that the microphone is properly screwed onto the ball-head and that any adapters are securely fastened.
• Limited movement or stiff joints: Check if any joints are overtightened. Loosen them slightly with the Allen wrench if necessary. Ensure no cables are obstructing movement.
• Cable clutter: Re-route cables through the integrated cable management channels to keep your workspace clear.

Tipy pro uživatele

• For microphones like the FIFINE AM8, it is recommended to remove the 3/8" to 5/8" adapter first, then connect the 1/4" to 3/8" adapter directly to the microphone for a secure fit.



• The arm is compatible with microphones using 1/4", 3/8", or 5/8" screw threads, and supports a maximum load capacity of 1.5kg (3.3lbs). Always ensure your microphone's weight does not exceed this limit.

Záruka a podpora

For warranty information, technical support, or any inquiries regarding your FIFINE BM88 microphone boom arm, please contact FIFINE customer service directly through their official channels. Refer to the product packaging or the official FIFINE webstránky pro kontaktní údaje.