1. Úvod
This manual provides instructions for the safe and efficient use of the N324 Dual Battery Charger. This charger is designed to charge batteries for various Trimble Total Stations, including the M3, DR2, DR3, DR5, Nivo 2M, and Nivo 2C models. Please read this manual thoroughly before operating the device.
2. Nastavení
- Vybalte nabíječku: Carefully remove the N324 dual battery charger and its AC/DC adapter from the packaging.
- Kontrola poškození: Check the charger and adapter for any visible signs of damage. Do not use if damaged.
- Connect the AC/DC Adapter: Plug the DC output connector of the AC/DC adapter into the input port on the N324 charger.
- Připojení k napájení: Plug the AC input of the adapter into a standard wall outlet (100-240V ~ 50/60Hz).
3. Návod k obsluze
The N324 charger features two charging bays, allowing for simultaneous charging of two compatible batteries.
- Vložte baterie: Align the battery with the charging bay and gently slide it into place until it clicks securely. Ensure proper orientation.
- Sledovat stav nabíjení: The charger will typically have indicator lights (not explicitly detailed in provided info, but common for chargers) to show charging status (e.g., red for charging, green for fully charged).
- Vyjměte baterie: Once charging is complete, carefully remove the batteries from the charging bays.
4. Údržba
- Čištění: K čištění nabíječky používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani rozpouštědla.
- Skladování: Pokud nabíječku nepoužíváte, skladujte ji na chladném a suchém místě.
- Vyhněte se tahání: Do not pull on the power cord to disconnect the charger. Always grasp the plug firmly.
5. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nabíječka se nezapíná | No power from outlet; adapter not connected properly; faulty adapter/charger | Check wall outlet with another device; ensure adapter is securely connected; contact support if issue persists. |
| Baterie se nenabíjí | Battery not inserted correctly; incompatible battery; faulty battery | Re-insert battery, ensuring proper contact; verify battery compatibility; try another battery if available. |
6. Specifikace
N324 Dual Battery Charger
- Model: N324
- Vstup: DC 9V, 4.0A
- výstup: DC 4.2V, 2A per port
- Kompatibilita: Trimble M3, DR2, DR3, DR5, Nivo 2M, Nivo 2C Total Stations (specifically batteries P/N: 67201-01-SPN / 8900084XXQ)
- Původ: Vyrobeno v Číně
- Číslo dílu: 67201-01-SPN
- sériové číslo: EGL-22039
AC/DC adaptér
- Model: 24-0503000-H
- Vstup: 100-240V ~ 50/60Hz 1.0A
- výstup: 5.0V === 3.0A
- Původ: Vyrobeno v Číně
Safety Information (from product label)
POZOR: Risk of fire, explosion or burns. Do not disassemble. Do not crush or modify. Do not heat above 60°C (140°F). Do not short circuit. Do not dispose of in fire or water. Use only rechargeable Lithium-ion batteries. Refer to the battery manufacturer's instructions for proper use.
7. Uživatelské tipy
- Always ensure the charger is placed on a stable, flat surface during operation to prevent accidental disconnections or damage.
- For optimal battery life, avoid completely draining batteries before recharging them.
- If charging only one battery, either bay can be used.
8. Záruka a podpora
V případě jakýchkoli dotazů, technické podpory nebo reklamací se prosím obraťte přímo na svého prodejce nebo výrobce. Uschovejte si účtenku jako doklad o koupi.
