BlitzWolf BW-CML2 RGB LED Monitor Hanging Light Bar

Konec produktuview

The BlitzWolf BW-CML2 RGB LED Monitor Hanging Light Bar is designed to provide optimal lighting for your computer desktop, enhancing both productivity and gaming immersion. It features an asymmetric optical design to eliminate screen glare, adjustable color temperature and brightness, and vibrant RGB backlighting with multiple modes.

Obsah balení

• 1 x BlitzWolf BW-CML2 Monitor Light Bar
• 1 x Uživatelská příručka
• 2 x lepicí podložky

Pokyny pro nastavení

The BW-CML2 features a space-saving, magnet fixing design, perfect for monitors with a thickness of 15-25mm.

1. Ensure your monitor's thickness is between 15-25mm. Wipe clean the surface of the computer monitor where the light bar will be placed.
2. Tear off the adhesive backing from the metal sheet and stick it to the middle position on the top of the display. Ensure the adhesive side is firmly attached to the monitor.
3. Pass one end of the USB cable through the bottom of the bracket. Place the bottom of the bracket on the display, aligning it with the metal sheet.
4. Paste the adhesive of the fixed bracket to the position between the bracket and the display screen. Connect the USB power cable to a suitable USB outlet (e.g., computer, phone charger, power bank) to complete the installation.

Návod k obsluze

Funkce dotykového ovládání

The BW-CML2 features intuitive touch controls located on the light bar:

• Jeden dotyk: Turns the lighting ON.
• Dvojitý dotek: Turns the lighting OFF.
• Krátký stisk: Upravuje jas.
• Dlouhý stisk: Switches color temperature.
• Short touch (RGB side): Toggles RGB backlight ON / cycles through 15 modes.
• Long press (RGB side): Turns RGB backlight OFF.

Režimy RGB podsvícení

The RGB backlight offers 15 modes to create a dazzling atmosphere and enhance game immersion:

• 7 x Colorful Flowing Effects
• 7 x Single Color Switches
• 1 x Auto Gradient Light

Adjustable Color Temperature (2700K-6500K)

Adjust the color temperature to suit various scenes and reduce eye strain:

• Chladné světlo: Ideal for working.
• Mixed Light: Suitable for easy reading.
• Teplé světlo: Perfect for relaxing.

Adjustable Brightness (300-1000Lux)

The brightness can be adjusted from 300 to 1000 Lux to reduce screen reflection and relieve eye fatigue. The asymmetric forward projection and anti-glare design ensure that light illuminates only the desktop, not the screen, maximizing focus and comfort.

Údržba

To ensure the longevity and optimal performance of your BlitzWolf BW-CML2 Monitor Light Bar, follow these simple maintenance guidelines:

• Čištění: Jemně otřete lamp body with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
• Odstranění prachu: Periodically use a soft brush or compressed air to remove dust from the light source and touch control area.
• Skladování: Pokud budete světelnou lištu skladovat delší dobu, odpojte ji od napájení a uložte ji na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Péče o kabely: Avoid bending or crimping the USB power cable excessively. Ensure it is not placed in a position where it can be tripped over or damaged.

Odstraňování problémů

Remote Control Pairing (Applicable to CML2 Pro model with remote control)

If you are experiencing issues with remote control functionality (for CML2 Pro model), follow these steps:

1. Resetovat: Turn the computer lights ON and OFF three times consecutively (power off - power on - power off - power on - power off - power on). The switching time between each state should be less than 1 second; otherwise, the count will be cleared. The light effect will indicate pairing mode, and after the white light breathes three times, it will remain steadily on. The pairing condition will time out after 30 seconds if no remote is paired.
2. Distribution Network (Pairing): While in the pairing state, press and hold the remote control key for 5 seconds. Once the remote control is successfully paired, the computer light will flash warm white twice, and then restore the previous lamp effect. The pairing is now complete.
3. Poznámka: The computer hanging lamp will not exit the pairing state even if successfully paired with a remote controller. A single lamp can be paired with up to 6 remote controllers.
4. Odvázání: To unbind a remote control, press and hold the key on the remote controller for 5 seconds. After successful unbinding, the screen lights up, and the warm white light flashes three times before restoring the previous lighting effect.

Obecné otázky

• Světlo se nerozsvítí: Ensure the USB cable is securely connected to both the light bar and a powered USB port. Try a different USB port or power adapter.
• RGB světla nefungují: Ensure you are using the correct touch control (short touch on the RGB side) to activate and cycle through RGB modes.
• Brightness/Color Temperature not adjusting: Ensure you are using the correct touch control (short press for brightness, long press for color temperature) and that the light is on.

Specifikace

Tipy pro uživatele

• Optimize Eye Comfort: Experiment with different color temperatures (Cool, Mixed, Warm) and brightness levels to find the most comfortable setting for your eyes during various activities like working, reading, or relaxing.
• Enhance Gaming: Utilize the 15 RGB backlight modes to create an immersive gaming atmosphere. Try different flowing effects or single colors to match your game or mood.
• Prostorově úsporné nastavení: The light bar's design frees up desk space, making your workspace tidier and more efficient.
• USB Power Convenience: The USB-powered design allows for flexible power options. You can power it directly from your computer's USB port, a wall adapter, or even a power bank for portability.

Záruka a podpora

Pro informace o záruce, technickou podporu nebo jakékoli dotazy týkající se produktu se prosím obraťte přímo na prodejce nebo výrobce. Uschovejte si účtenku jako doklad o koupi.