Zavedení
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Scimagic-RC remote control, compatible with various Normstahl and Crawford garage door and gate openers. Please read this manual carefully before use to ensure proper functionality and longevity of your device.
Nastavení a programování
1. Kontrola kompatibility
Ensure your existing garage door or gate opener is compatible with the Scimagic-RC remote control. This remote is designed for Normstahl / Crawford systems using 433.92MHz rolling code technology. Compatible models include:
- Normstahl / Crawford EA433 2KS
- Normstahl / Crawford EA433 4KS
- Normstahl / Crawford RCU433-2
- Normstahl / Crawford RCU433-4
- Normstahl / Crawford N002800
- Normstahl / Crawford EA433 2KM Micro
- Normstahl / Crawford T433-4
2. Programming Your New Remote Control
The programming process involves interacting with your motor's receiver unit. Follow these steps:
- Approach your motor so you are standing a few feet away from it.
- On the motor, press the programming button (often labeled 'Learn' or 'Prog'). Refer to your motor's manual for the exact location of this button. Release the button after pressing.
- Press a button on your new Scimagic-RC remote control for 1 second.
- Wait 10 seconds for the system to register the new remote.
- Your new remote control is now programmed. Test its functionality.
Poznámka: The programming button on the motor is typically a small button, sometimes recessed, that you press briefly.
Návod k obsluze
Once programmed, your Scimagic-RC remote control operates similarly to your original remote. Each button on the remote corresponds to a specific function programmed into your garage door or gate opener.
- Ensure you are within the effective radio transmission range of your receiver (typically 20-100m in open areas).
- Press the desired button on the remote control to activate the corresponding function (e.g., open, close, stop).
- The indicator light on the remote will illuminate briefly when a button is pressed, confirming signal transmission.
Dosah rádiového přenosu
The effective transmission distance is typically 20-100 meters in an open area. Obstructions such as walls, doors, trees, or other interference (like a garage door or brick wall) can significantly reduce the remote control's range. For optimal performance, ensure a clear line of sight between the remote and the receiver whenever possible.
Údržba
Výměna baterie
The remote control is powered by a CR2032 (SMG-240) or 12V 27A (SMG-015) battery. When the remote's range decreases significantly or the indicator light fails to illuminate, it's time to replace the battery.
For SMG-240 (CR2032 battery):
- Najděte přihrádku na baterie na zadní straně dálkového ovladače.
- Opatrně otevřete kryt přihrádky.
- Vyjměte starou baterii CR2032.
- Vložte novou baterii CR2032 kladnou (+) stranou nahoru.
- Bezpečně zavřete kryt bateriového prostoru.
For SMG-015 (12V 27A battery):
- Locate the seam on the remote casing.
- Use a small flat-head screwdriver or similar tool to gently pry open the casing.
- Carefully remove the old 12V 27A battery.
- Vložte novou baterii 12V 27A a dbejte na správnou polaritu.
- Přichytit casing back together until it is securely closed.
Čištění
Dálkový ovladač otírejte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit ovladač.asing nebo vnitřních součástí.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Dálkový ovladač nefunguje po naprogramování. | Incorrect programming steps, incompatible receiver, or dead battery. | Re-attempt programming carefully following the steps. Verify receiver compatibility. Check and replace battery if necessary. |
| Snížený provozní dosah. | Low battery, environmental interference, or physical obstructions. | Replace the battery. Ensure no large metal objects or electronic devices are interfering. Try operating from a different position. |
| Kontrolka nesvítí. | Dead battery or internal fault. | Replace the battery. If the problem persists, contact customer support. |
Specifikace
SMG-240 Specifications:
| Funkce | Detail |
|---|---|
| Model produktu | SMG-240-NORMSTAHL |
| Type of programming | Programming with the receiver |
| Materiál produktu | ABS |
| Velikost | 55 * 45 * 8 mm |
| Hmotnost produktu | 40 g |
| Počet kanálů | 4 |
| Baterie | 3V (CR2032, included) |
| Instalace | Bezdrátový |
| Kód | Pohyblivý kód |
| Frekvence | 433 MHz, 433.92 MHz |
| Radio transmission distance | 20-100m (Open area) |
SMG-015 Specifications:
| Funkce | Detail |
|---|---|
| Kompatibilita | NORMSTAHL Crawford garage door opener |
| Počet kanálů | 4 |
| Frekvence | 433.92Mhz Rolling Code |
| Baterie | 12V 27A |
| Poznámka | This is a third-party remote control, not made by Normstahl Crawford. |
Tipy pro uživatele
- Always keep your remote control dry and away from extreme temperatures to prevent damage.
- When programming, ensure you are close to the receiver unit for a strong signal.
- If you have multiple remotes, program them one by one, testing each after successful programming.
- Consider keeping a spare battery on hand to avoid unexpected interruptions in service.
Často kladené otázky (FAQ)
Q: My remote doesn't seem to work, what should I do?
A: First, check the battery and replace it if necessary. Then, try re-programming the remote control following the steps in the 'Setup and Programming' section. Ensure you are close enough to the receiver during programming.
Q: What does 'rolling code' mean?
A: Rolling code technology means that the code transmitted by the remote changes each time it's used. This enhances security by preventing unauthorized copying of the signal.
Q: Can I use this remote for other brands of garage door openers?
A: This remote is specifically designed to be compatible with Normstahl and Crawford systems that use 433.92MHz rolling code. It may not work with other brands or frequencies.
Informace o výrobci
Výrobce: Shenzhen Scimagic Development Technology Co.Ltd
Adresa: Honghai Gebu Building 2301, Baoan Road, Songgang Baoan District Shenzhen Guangdong China.
For further assistance or inquiries, please refer to the seller's contact information provided at the time of purchase.
