Aigo AR12PRO 120mm RGB PWM Cooling Fan User Manual

1. Úvod

The Aigo AR12PRO is a high-performance 120mm cooling fan designed for PC cases and radiators, featuring Addressable RGB (ARGB) lighting and Pulse Width Modulation (PWM) control. This manual provides detailed instructions for installation, wiring, operation, and maintenance to ensure optimal performance and longevity of your fan.

2. Vlastnosti produktu

• Precise PWM Control: Adjust fan speeds between 800-1600 RPM (±20%) to balance cooling performance and noise levels.
• Impressive ARGB Lighting: Features an infinity mirror effect with a single RGB LED ring, creating a charming visual effect.
• Synchronizace základní desky: Compatible with 5V 3-pin ARGB headers for synchronized lighting effects with your motherboard (MSI/Gigabyte JRAINBOW1, ASUS ADD_HEADER2).
• Vysoký průtok vzduchu: Delivers up to 74 CFM (MAX) of air volume.
• Efektivní chlazení: Provides a wind pressure of 2.2mmH2O.
• Tichý provoz: Operates at a maximum noise level of 28.6 dBA.
• Odolný design: Equipped with a Hydro Bearing for a long lifespan of 100,000 hours.
• Absorpce nárazů: Designed with soft material damping pads to absorb vibration and reduce noise.
• Optimized Blade Design: Features 9 blades with screw threads to optimize air volume and output.

Image: Close-up of Aigo AR12PRO fans, detailing 800-1600RPM, 74CFM, 2.2mmH2O, and infinity mirror effect.

3. Specifikace

Image: Product Information table with specifications for AR12 PRO PWM fan.

Image: Diagram showing the dimensions of the 120mm fan (120x120x25mm).

4. Obsah balení

The Aigo AR12PRO fan package typically includes the following components:

• Aigo AR12PRO 120mm PWM ARGB Fan(s)
• APC1 ARGB Controller (if purchased as part of a kit)
• 5V RGB Signal Cable (500±10mm)
• PWM Signal Cable (500±10mm)
• Remote Control (if controller is included)
• Double-sided Velcro (for controller mounting)

Image: A single Aigo AR12PRO fan with its 5V A-RGB Connector and PWM 4 Pin Connector.

Image: The APC1 ARGB controller and included accessories: 5V RGB Signal Cable, PWM Signal Cable, Remote Control, and Double Side Velcro.

5. Nastavení a instalace

Follow these steps to install your Aigo AR12PRO fans and controller:

1. Montáž ventilátorů: Secure the fans to your PC case or radiator using appropriate screws. Ensure the fan's wind direction indicator (arrow on the side) points towards the desired airflow (front is air inlet, back is air outlet).
2. Absorpce nárazů: The fans are equipped with soft material damping pads. Ensure these pads are properly seated to minimize vibration and noise.
3. Controller Placement (if applicable): If using the APC1 ARGB controller, choose a suitable location inside your PC case. Use the provided double-sided Velcro to secure the controller.

Image: Close-up illustrating the shock absorption design of the fan.

Image: Diagram showing the wind direction indicator (front air inlet, back air outlet).

6. Schéma zapojení

Proper wiring is crucial for the functionality of your fans. Refer to the diagrams below for correct connections.

6.1 Fan to Fan Connection (Series)

The AR12PRO fans can be connected in series. Each fan has a 4-pin PWM male and female connector, and a 5V A-RGB 3-pin male and female connector. Connect the male connector of one fan to the female connector of the next fan in the chain.

Image: Detailed diagram of AR12 PRO PWM fan connection steps, showing 4-pin PWM male/female and 5V A-RGB 3-pin male/female connectors and series connection.

6.2 Controller Connection (if applicable)

If you are using the APC1 ARGB controller, connect the fans to the controller's ARGB and PWM ports. The controller requires SATA power from your power supply.

Image: The APC1 controller with cables and remote, showing SATA power input and ARGB/PWM fan ports.

6.3 Motherboard Connection

Connect the 4-pin PWM cable from the last fan in the series (or directly from a single fan) to a 4-pin fan header on your motherboard. For ARGB lighting, connect the 5V 3-pin ARGB cable to a compatible 5V 3-pin ARGB header on your motherboard. Do NOT connect to a 12V 4-pin RGB header, as this will damage the LEDs.

Image: Diagram showing motherboard connector interfaces for ARGB (MSI/Gigabyte JRAINBOW1, ASUS ADD_HEADER2) and incompatible 12V RGB headers.

Image: Aigo AR12PRO fan connected to a motherboard with 5V ARGB sync, highlighting compatible and incompatible RGB headers.

Image: Diagram illustrating the connection method for 4-pin PWM and 5V 3-pin ARGB interfaces.

7. Návod k obsluze

7.1 Řízení otáček ventilátoru (PWM)

The AR12PRO fans utilize PWM technology, allowing your motherboard or fan controller to dynamically adjust fan speed based on system temperature. This ensures efficient cooling when needed and quiet operation during lighter loads.

7.2 Ovládání osvětlení ARGB

• Synchronizace základní desky: If connected to a compatible 5V 3-pin ARGB header on your motherboard, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion).
• Controller & Remote: If using the APC1 ARGB controller, you can control the lighting effects using the included remote control. The remote allows you to change colors, modes, and brightness.
• Reset Button Jumper: The controller may also offer a 'RESET SW' jumper. This allows you to connect your PC case's reset button to the controller to cycle through ARGB modes without needing the remote.

Image: Showing the RESET button jumper connection on the controller for convenient control.

8. Údržba

To ensure optimal performance and longevity of your Aigo AR12PRO fans, regular maintenance is recommended:

• Čištění: Periodically clean the fan blades and frame to remove dust buildup. Use a can of compressed air or a soft brush. Ensure the fan is powered off before cleaning.
• Inspekce: Zkontrolujte kabely, zda nevykazují známky opotřebení nebo poškození. Ujistěte se, že jsou všechna připojení bezpečná.

9. Řešení problémů

• Ventilátory se netočí:
  - Check if the 4-pin PWM cable is securely connected to the motherboard or controller.
  - Ensure the power supply (SATA connector for controller) is properly connected and receiving power.
• RGB lights not working or incorrect colors:
  - Verify that the 5V 3-pin ARGB cable is correctly connected to a compatible 5V 3-pin ARGB header on your motherboard or to the controller.
  - DO NOT connect to a 12V 4-pin RGB header. This will damage the LEDs.
  - If using a controller, ensure it is powered and the remote control has a working battery.
• Nadměrný hluk:
  - Check for any obstructions preventing the fan blades from spinning freely.
  - Ensure the fan is securely mounted and the shock absorption pads are in place.
  - If the noise is a grinding sound, the bearing might be faulty.

10. Uživatelské tipy

• If your motherboard does not have a 5V 3-pin ARGB sync interface, consider purchasing a fan kit that includes a dedicated controller to manage the RGB lighting effects.
• When connecting multiple fans, ensure they are daisy-chained correctly to avoid overloading any single port.
• For optimal cooling, ensure proper airflow direction within your PC case. Fans typically have an arrow indicating airflow direction.

11. Záruka a podpora

The warranty period for Aigo fans is typically 1 year. For any issues or support, please contact the seller or manufacturer directly.