1. Úvod
This KKMOON 3-in-1 device combines a digital laser rangefinder, a 5-meter tape measure, and a laser cross-marking tool into a single, versatile unit. Designed for precision and durability, it is suitable for a wide range of applications including road engineering, housing construction, water conservancy, electrical power, and pipeline projects. This manual provides detailed instructions for safe and effective use of your new measuring device.
2. Klíčové vlastnosti
- Design 3 v 1: Integrates laser ranging, 5m tape measure, and laser cross-marking.
- Odolná konstrukce: High elasticity and toughness ABS+TPR housing, anti-slip, drop-resistant, and dust-proof for extended service life.
- Jasný displej: LCD display with backlight ensures clear visibility of measurement data even in low-light conditions.
- 5m Tape Measure: Coated manganese steel tape with a ruler hook for easy use, featuring both imperial and metric scales.
- Self-Locking Tape: Automatically locks the current measurement position; press the unlock button for safe, automatic tape rebound.
- Laserové měření vzdálenosti: Available in 40m or 60m (optional) ranges for long-distance measurements.
- Laser Cross-Marking: Provides horizontal and vertical lines for renovation and alignment tasks.
- Více funkcí měření: Supports single/continuous measurement, area measurement, volume measurement, and Pythagorean measurement.
- Datová paměť: Stores up to 20 groups of historical measurement data.
3. Zařízení skončiloview
Klíčové komponenty:
- Zobrazit: LCD screen for showing measurements and settings.
- Tape Measure Take Back Button: Releases the tape measure for retraction.
- Čočka: For laser emission and reception.
- Laserový emitor: Projects the laser beam for distance measurement.
- Přihrádky na baterie: Houses the 2 x 1.5V AAA batteries.
- Power Off/RE-ZERO Button: Turns the device off or resets certain functions.
- Measurement Units Switch or View Storage Data Button: Cycles through measurement units (m/in/ft) or accesses stored data.
- Power On/Measure Button (MEAS): Powers on the device and initiates laser measurements.
- Switch between Front-and-Rear Reference and Measurement Modes: Adjusts the measurement reference point (front or rear of the device).
- Cross Laser Emitter: Projects horizontal and vertical laser lines.
- Tape Measure Port: Where the tape measure extends from.
4. Nastavení
4.1 Instalace baterie
- Locate the battery compartment on the device (refer to Figure 1).
- Otevřete kryt bateriového prostoru.
- Insert 2 x 1.5V AAA batteries, ensuring correct polarity (+/-).
- Bezpečně zavřete kryt bateriového prostoru.
4.2 Zapnutí/vypnutí
- Zapnutí: Stiskněte a podržte MEAS tlačítko na 2 sekund.
- Vypnutí: Stiskněte a podržte JASNÝ button to shut down the device. The device will automatically shut down after 180 seconds of inactivity.
5. Návod k obsluze
5.1 Laser Measurement (Rangefinder)
- Zapnutí: Stiskněte a podržte MEAS tlačítko na 2 sekund.
- Jednorázové měření: Krátce stiskněte MEAS button two times in a row to activate the laser and take a single measurement.
- Průběžné měření: (Implied by device capabilities) Typically, a single short press of the MEAS button after power-on will initiate continuous measurement, updating the distance as the device moves.
- Referenční bod: Use the dedicated button to switch between front-end and rear-end reference points for measurement, depending on your needs.
5.2 Advanced Laser Measurement Functions
The device supports various advanced measurement modes. Cycle through these modes using the appropriate button (often the 'Function' or 'Mode' button, if available, or repeated presses of MEAS/Unit button as shown in the video).
- Data Accumulation Function: Allows adding multiple laser measurements together. (Demonstrated in Video 1)
- Měření plochy: Measures the area of a surface. (Demonstrated in Video 1)
- Měření objemu: Measures the volume of a space. (Demonstrated in Video 1)
- Pythagorejské měření: Calculates distances indirectly using the Pythagorean theorem (single and double Pythagorean theorem modes available). (Demonstrated in Video 1)
5.3 Tape Measure Usage
- Pull out the 5m coated manganese steel tape measure from its port.
- The tape will automatically lock at the desired length due to the self-locking device.
- To retract the tape, press the tape measure take back button. The tape will safely and automatically rebound into the device.
5.4 Laser Cross-Marking
The device features a laser cross-marking function to project horizontal and vertical lines for alignment. Activate this function using the dedicated cross laser emitter button (refer to Figure 1).
5.5 Measurement Unit Switching
To switch between measurement units (meters, inches, feet), short press the 'Unit' button. (Demonstrated in Video 1)
5.6 Ukládání a vyvolání dat
The device can store up to 20 groups of historical measurement data. Use the 'Measurement units switch or view storage data' button to access and cycle through stored data. (Demonstrated in Video 1)
To reset historical data storage to zero, follow the procedure shown in Video 1, typically involving a long press or specific button combination on the 'Measurement units switch or view storage data' button.
6. Údržba
- Čištění: Zařízení otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Skladování: Zařízení skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot. Pokud jej skladujete delší dobu, vyjměte baterie, abyste zabránili vytečení.
- Zacházení: Avoid dropping the device or subjecting it to strong impacts. While designed to be durable, excessive force can cause damage.
- Péče o čočky: Keep the laser lens clean and free from dust or smudges to ensure accurate measurements. Use a soft lens cloth if necessary.
7. Řešení problémů
- Zařízení se nezapíná: Check if the batteries are inserted correctly and are not depleted. Replace with fresh AAA batteries if necessary.
- Inaccurate laser measurements: Ensure the laser lens is clean. Make sure there are no obstructions in the laser path. Verify the reference point setting (front or rear).
- Tape measure not retracting: Ensure the tape is not bent or obstructed. Press the tape measure take back button firmly.
- Problémy se zobrazením: Pokud je displej tlumený nebo bliká, vyměňte baterie. Pokud problém přetrvává, kontaktujte zákaznickou podporu.
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Název produktu | 3in1 Laser Rangefinder |
| Materiál | ABS+TPR+coated manganese steel |
| Baterie | 2 * 1.5V AAA baterie (nejsou součástí balení) |
| Laser Measuring Ranges | 0.2-40m, 0.2-60m (optional) |
| Přesnost měření | ±2 mm |
| Jednotka měření | m/in/ft |
| Typ laseru | 635nm≤1mW |
| Automatic Laser Shutdown Time | 30 sekund |
| Automatic Device Shutdown Time | 180 sekund |
| Ukládání dat | 20 skupiny |
| Tape Measure Working Ranges | 0-5 m |
| Minimum Scale (Tape) | 1 mm |
| Šířka pásky | 19 mm |
| Pásková jednotka | Imperial system and metric scale |
| Ruler Belt Material | 65 manganese steel |
| Pracovní teplota | 0-40 ℃ |
| Skladovací teplota | -10 ℃ až 50 ℃ |
| Velikost položky | 85 * 82 * 56 mm / 3.35 * 3.23 * 2.20 palce |
| Hmotnost položky | 270 g / 9.52 unce |
| Velikost balení | 125 * 125 * 60 mm / 4.92 * 4.92 * 2.36 palce |
| Hmotnost balení | 300 g / 10.58 unce |
9. Uživatelské tipy
- When using the tape measure, the digital display will show the measured distance, providing an accurate reading alongside the physical tape.
- Always ensure the laser emitter and receiver lenses are clean for optimal accuracy, especially when performing long-distance measurements.
- For best results with laser measurements, ensure the target surface is flat and reflective. Highly absorbent or transparent surfaces may affect accuracy.
10. Záruka a podpora
S jakýmikoli dotazy týkajícími se produktu, technické podpory nebo reklamací se prosím obraťte přímo na prodejce nebo výrobce. Uschovejte si účtenku jako doklad o koupi.
