Leclstar LED Garage Light

LED Garage Light User Manual

Model: LED Garage Light | Brand: Leclstar

Zavedení

Thank you for choosing the Leclstar LED Garage Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.

Bezpečnostní informace

  • Always turn off the power supply before installing, removing, or performing any maintenance on the light fixture.
  • Zajistěte zvtage supply (AC85-265V) matches the requirements of the light fixture.
  • Do not touch the light panels immediately after prolonged use, as they may be hot due to heat dissipation.
  • This product is designed for indoor use in dry environments. Avoid exposure to water or high humidity.
  • Nepokoušejte se svítidlo rozebírat ani upravovat, mohlo by dojít ke ztrátě záruky a mohlo by dojít k úrazu elektrickým proudem.
  • Uchovávejte mimo dosah dětí.

Obsah balení

Zkontrolujte prosím balení, zda jsou všechny součásti přítomny a nepoškozené:

  • LED Garage Light (Quantity and panel configuration may vary based on purchased model, e.g., 3-panel, 5-panel, 6-panel, 10-panel, or 12-panel)
  • Uživatelská příručka (tento dokument)

Note: E26/E27 sockets are not included and must be purchased separately if not already available.

Nastavení a instalace

The Leclstar LED Garage Light is designed for easy, tool-free installation into standard E26/E27 screw-in sockets.

  1. Vypnout: Before installation, ensure the power to the light fixture circuit is turned off at the breaker or switch.
  2. Identify Socket: Locate a standard E26 or E27 screw-in light bulb socket where you intend to install the garage light.
  3. Zašroubujte: Carefully screw the LED Garage Light into the E26/E27 socket clockwise until it is snug. Do not overtighten. No additional tools or wiring are required.
Installation diagram showing the LED Garage Light being screwed into an E26 socket without tools.
Figure 1: Easy installation into an E26/E27 socket. No tools needed.

Návod k obsluze

Once installed and power is restored, the LED Garage Light will illuminate. Its unique deformable design allows for adjustable light direction.

  1. Zapnout/Vypnout: Use the wall switch connected to the E26/E27 socket to turn the light on or off.
  2. Upravit panely: The individual LED panels can be manually adjusted up to 90 degrees. Gently pivot each panel to direct light precisely where needed. This allows for 360-degree illumination and flexible light coverage.
Diagram illustrating the adjustable light direction of the LED Garage Light, showing panels at 0, 45, and 90-degree angles.
Figure 2: Adjustable light direction with panels pivoting up to 90 degrees.
Image showing the LED Garage Light with panels rotated at 0, 45, and 90 degrees for omnidirectional illumination.
Figure 3: Omnidirectional illumination achieved by rotating panels.

Údržba

The LED Garage Light is designed for long-lasting performance with minimal maintenance.

  • Čištění: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the light fixture. Do not use abrasive cleaners or solvents.
  • Odvod tepla: The light features a hollow ventilation design for efficient heat dissipation. Avoid obstructing the ventilation areas.
  • Manipulace s panely: While the panels are adjustable, avoid excessive force when repositioning them to prevent damage.
Diagram illustrating the fast heat dissipation design with hollow ventilation and airflow arrows. A warning states not to touch panels after long use due to heat.
Figure 4: Fast heat dissipation design with hollow ventilation. Panels may be hot after prolonged use.
Průřez view of the LED light showing 144 high-end LEDs, PC housing, and an efficient cooling system for heat dissipation.
Obrázek 5: Vnitřní view highlighting efficient heat dissipation components.

Odstraňování problémů

Světlo se nerozsvítí:
  • Zkontrolujte, zda je zapnutý hlavní vypínač.
  • Ensure the light is securely screwed into the E26/E27 socket.
  • Zkontrolujte, zda není vypnutý jistič svítidla.
  • Test the socket with another working bulb to confirm the socket is functional.
Blikání světla:
  • Ensure the light is securely screwed into the E26/E27 socket.
  • Check for loose wiring in the socket or switch (consult a qualified electrician if unsure).
  • Ověřte, že svtage supply is stable and within the AC85-265V range.
Světelný výstup je slabý:
  • Ensure all adjustable panels are fully extended and positioned for maximum illumination.
  • Check if the light fixture or panels are covered in dust or debris and clean them as per maintenance instructions.

Specifikace

FunkceSpecifikace
Číslo modeluLED garážové světlo
Název značkyLeclstar
Wattage Možnosti80W / 150W (depending on model)
Lumen výstup8000LM (80W) - 15000LM (150W)
Teplota barev6500K denní světlo
svtageAC85-265V
Zdroj napájeníAC
Základní typE26/E27
Světelný zdrojLED bulbs (72-152 top-level LED chips)
Materiál tělaAluminum, ABS Plastic, PC Lens
Je stmívatelnéŽádný
Typ přepínačeNone (controlled by external switch)
LED Panel Adjustable Angle0°- 90°
Lighting Coverage Area360°
Celý život50,000+ hodin
OsvědčeníCE
Dimensions (150W model)Width: 32cm (12.59in), Height: 10cm (3.93in)
AplikaceGarage, Warehouse, Parking Lot, Exhibition Hall, Home, Workshop, Supermarket, Attic, etc.
Dimension diagram for the 150W LED Garage Light, showing a width of 32cm (12.59in) and a height of 10cm (3.93in).
Figure 6: Dimensions of the 150W LED Garage Light.
Collage of images showing various applications for the LED Garage Light, including front door, garage, warehouse, workshop, supermarket, and attic.
Figure 7: Versatile applications for the LED Garage Light.

Tipy pro uživatele

  • For optimal light distribution in large spaces, consider installing multiple units or choosing a model with more panels.
  • Experiment with different panel angles to find the best illumination for your specific task or area.
  • The high brightness of these lights makes them suitable for areas requiring significant illumination, such as workshops or storage facilities.

Záruka a podpora

This Leclstar LED Garage Light comes with a 1-letá záruka od data nákupu, která se vztahuje na výrobní vady vzniklé běžným používáním.

For warranty claims, technical support, or any questions regarding your product, please contact the seller or retailer from whom you purchased the item. Please retain your proof of purchase for warranty validation.

Související dokumenty - LED garážové světlo

Předview Leclstar Star Moon String Lights User Manual - Setup and Operation
Comprehensive user manual for Leclstar Star Moon String Lights, covering operating procedures, battery installation, and important precautions for safe and effective use.
Předview Leclstar PG30 Wake-up Light Sound Machine User Manual
Comprehensive user manual for the Leclstar PG30 Wake-up Light Sound Machine. Learn how to set alarms, use the sunrise simulator, white noise features, ambient light, and sleep timer. Includes safety information.
Předview Návod k instalaci garážového osvětlení Maxxima E26 - MLB-G8000D
Komplexní instalační návod pro garážové světlo Maxxima E26 (model MLB-G8000D) s podrobnými bezpečnostními varováními, upozorněními, podrobnými instalačními postupy a informacemi o záruce. Vhodné pro žárovky s paticí E26 bez předřadníku.
Předview FLOS Luminator Floor Lamp - Installation Guide & Technical Specs
FLOS Luminator floor lamp: Installation, usage, and technical specifications. Learn about safe setup, bulb compatibility (E27/E26, HSGSR/SBLED), and cleaning for this classic 1954 design by Achille & Pier Giacomo Castiglioni.
Předview Artemide Logico Ceiling Light Installation and Bulb Guide
Comprehensive guide for installing and selecting bulbs for Artemide Logico Micro, Mini, and standard ceiling lights. Includes safety precautions and assembly instructions.
Předview JOYON E27 Hanging Light Installation Manual
Step-by-step instructions for installing the JOYON E27 hanging light fixture. Includes notes on bulb compatibility and important safety warnings.