1. Konec produktuview
The Feed Dog #H1A0363000 is a crucial replacement component designed for specific Singer heavy-duty sewing machine models. This steel part is responsible for gripping and moving the fabric under the presser foot, ensuring consistent stitch length and smooth material handling during various sewing tasks, including embroidery.
Klíčové vlastnosti:
- Odolná ocelová konstrukce
- Ensures consistent fabric feeding
- Compatible with multiple Singer models
2. Nastavení a instalace
Replacing a feed dog requires careful attention to detail. It is recommended that this procedure be performed by an experienced sewing machine technician or an individual familiar with sewing machine repair to avoid damage to the machine or the new part.
Kompatibilita: This feed dog is specifically designed for Singer sewing machine models 4411, 4423, 4432, 5511, 5523, and 5532.
General Installation Steps (Consult your sewing machine's specific service manual for detailed instructions):
- Vypnout: Ensure the sewing machine is unplugged from the power source.
- Access the Needle Plate: Remove the needle plate, typically by unscrewing one or two screws.
- Remove Old Feed Dog: Carefully locate and remove the screws holding the old feed dog in place. Note the orientation of the old feed dog.
- Instalace nového podavače: Position the new Feed Dog #H1A0363000 in the correct orientation. Secure it with the screws, ensuring they are tightened appropriately but not overtightened.
- Znovu sestavit: Replace the needle plate and any other components removed during the process.
- Test: Plug in the machine and perform a manual test to ensure the feed dog moves correctly and the fabric feeds smoothly.
Obrázek 1: Úhlové view of the Feed Dog H1A0363000
3. Návod k obsluze
The feed dog operates automatically as part of your sewing machine's mechanism. Once correctly installed, it works in conjunction with the presser foot to move fabric under the needle, creating stitches.
Funkčnost:
- Fabric Movement: The teeth on the feed dog grip the fabric and move it forward in precise increments, determining the stitch length.
- Výšivka: For embroidery, the feed dog may need to be lowered or covered, depending on your machine model and the type of embroidery being performed. Refer to your sewing machine's user manual for specific instructions on lowering or disengaging the feed dog for free-motion embroidery.
Obrázek 2: Nahoře view of the Feed Dog, highlighting the fabric-gripping teeth
4. Údržba
Proper maintenance of your feed dog ensures optimal performance and extends its lifespan. As the feed dog is made of steel, it is durable but can accumulate lint and debris.
Čištění:
- Regularly clean the area around the feed dog and under the needle plate using a small brush or vacuum cleaner to remove lint and fabric fibers.
- Před čištěním se ujistěte, že je stroj odpojený.
- Avoid using harsh chemicals or abrasive materials that could damage the steel surface or the machine.
Inspekce:
- Periodically inspect the teeth of the feed dog for any signs of wear, damage, or bending. Worn teeth can lead to uneven fabric feeding.
- If significant wear or damage is observed, consider replacing the feed dog to maintain sewing quality.
Obrázek 3: Spodní část view of the Feed Dog
5. Řešení problémů
If you experience issues with fabric feeding after installing the new feed dog, consider the following common troubleshooting steps:
Problem: Fabric not feeding or feeding unevenly.
- Zkontrolujte instalaci: Ensure the feed dog is correctly installed and securely fastened. Incorrect alignment can hinder its movement.
- Čistota: Verify that there is no lint or debris obstructing the feed dog's movement or accumulating between its teeth.
- Tlak přítlačné patky: Adjust the presser foot pressure. If it's too low, the fabric may not be gripped firmly enough by the feed dog.
- Feed Dog Height: Ensure the feed dog is not accidentally lowered or disengaged. Refer to your sewing machine manual for how to raise the feed dog.
- Stehová deska: Check if the needle plate is correctly seated and not obstructing the feed dog.
If problems persist, consult a professional sewing machine technician.
6. Specifikace
| Atribut | Detail |
|---|---|
| Číslo modelu | H1A0363000 |
| Značka | Singer (Compatible) |
| Materiál | Ocel |
| Typ | Sewing Machine Part (Feed Dog) |
| Použití | Embroidery, General Sewing |
| Compatible Singer Models | 4411, 4423, 4432, 5511, 5523, 5532 |
| Přibližné rozměry balení | 15 cm (délka) x 8 cm (šířka) x 1 cm (výška) |
| Přibližná hmotnost balení | 0.05 kg |
| Původ | pevninská Čína |
7. Uživatelské tipy
- Always refer to your specific Singer sewing machine's user manual for detailed instructions on part replacement and maintenance, as procedures can vary slightly between models.
- When cleaning the feed dog area, use a soft brush to avoid scratching the metal or dislodging small components.
- If you frequently sew with delicate fabrics, ensure your feed dog is clean and free of burrs to prevent snagging.
8. Záruka a podpora
For warranty information or technical support regarding the Feed Dog #H1A0363000, please contact the original seller or the manufacturer. Keep your purchase records for any warranty claims.
Informace o prodejci: SKY Sewing Shop5786744 Store
