DATA FROG Wireless Game Controller Instruction Manual

1. Konec produktuview

The DATA FROG Wireless Game Controller (Model ZXX1016SB) is designed to enhance your gaming experience across multiple platforms. It features double vibration, a 6-axis motion sensor, a touchpad with an integrated light bar, a built-in speaker, and a 3.5mm audio jack. The controller also includes customizable Elite Mapping Buttons (MR/ML) and dynamic RGB lighting. It is compatible with PlayStation 4 (PS4, PS4 Slim, PS4 Pro), PC, Android, and iOS devices.

2. Obsah balení

• 1 x DATA FROG Wireless Game Controller
• 1 x USB nabíjecí kabel
• 1 x balení

3. Nastavení a připojení

3.1 First Usage (PS4 Console)

1. Připojte ovladač ke konzoli PS4 pomocí dodaného kabelu USB.
2. The console will recognize and pair with the controller automatically.
3. Once recognized, you can remove the USB cable. For subsequent uses, the controller will connect automatically.

3.2 Připojení k PC

There are two methods for connecting to a PC:

1. Metoda 1: Připojení kabelem USB
   Connect the controller directly to your PC using the USB cable. The PC should automatically install the necessary drivers.
2. Method 2: Wireless Bluetooth Connection (for PCs with Bluetooth 4.0 or higher)
   If your PC has built-in Bluetooth or you are using a USB Bluetooth receiver (not included):
   
   1. Install and insert the USB wireless Bluetooth-compatible controller receiver (if using one) into your PC. The driver should install automatically.
   2. On the PS4 controller, simultaneously press and hold the 'SHARE' button and the 'PS' button for approximately 3-5 seconds. Release when the white light on the top of the joystick flashes quickly. (Note: Do not attempt to enter pairing mode while charging).
   3. On your PC, go to "Control Panel" > "Devices and Printers", then click "Add Device". Allow the computer to detect nearby Bluetooth-compatible devices.
   4. Select the controller from the list to complete the pairing process.

Poznámka: A USB Bluetooth receiver is not included and must be purchased separately if your PC does not have built-in Bluetooth.

3.3 Připojení k zařízením se systémem Android/iOS

The controller supports connection to Android and iOS devices. Follow the standard Bluetooth pairing procedure for your mobile device, similar to the PC Bluetooth connection steps (press SHARE + PS button to enter pairing mode).

4. Návod k obsluze

4.1 Elite Mapping Buttons (MR/ML)

The controller features two remappable back buttons, MR and ML, allowing you to customize your controls for a competitive edge. Refer to the controller's specific programming instructions (usually found in a dedicated section or via a combination of button presses) to assign functions to these buttons.

4.2 RGB osvětlení

The controller includes vibrant and dynamic RGB lighting effects. To change the lighting mode, press the designated button combination (typically indicated by a light bulb icon or similar) simultaneously. Available modes include Gradient, Colorful, Flashing, and Constantly Lit.

4.3 No-Deadzone Mode

Toggle the No-Deadzone Mode on or off for precise control, suitable for both competitive and casual gaming sessions. This feature allows for immediate response to joystick movements without any initial input threshold.

4.4 Haptic Feedback and Motion Sensing

The controller is equipped with built-in dual vibration motors for immediate haptic feedback and a 6-axis gyroscope sensor for superior motion sensing. These features enhance immersion and provide accurate control in games that support them.

4.5 Touchpad and Light Bar

The integrated touchpad and light bar offer new ways to interact with games, providing additional input methods and visual cues that enhance game operation.

4.6 Built-in Speaker and 3.5mm Audio Jack

The controller includes a built-in speaker for increased player immersion by playing various in-game sounds directly through the controller. A 3.5mm stereo audio jack is also provided for compatibility with gaming headsets.

5. Údržba

5.1 Nabíjení

The controller has a built-in 600mAh lithium polymer battery. It can be recharged by plugging it into your PS4 system (even on standby) or any standard charger with a USB Type-C port using the provided USB cable. The USB Type-C interface allows for easy plugging in either orientation.

5.2 Obecná péče

• Uchovávejte regulátor v suchu a mimo dosah vlhkosti.
• Clean the controller with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Uložte regulátor na bezpečném místě, abyste zabránili jeho fyzickému poškození.

6. Řešení problémů

• Controller not connecting to PS4: Ensure the initial wired connection and pairing process was followed correctly. If issues persist, try resetting the controller (a small reset button is usually located on the back) and re-pairing.
• Controller not connecting to PC via Bluetooth: Verify your PC has Bluetooth 4.0 or higher, or that your USB Bluetooth receiver is properly installed. Ensure the controller is in pairing mode (flashing white light). Check your PC's Bluetooth settings to ensure it's discoverable and the controller is selected.
• Input lag or unresponsive buttons/joysticks: Ensure the controller is fully charged. If using wirelessly, try connecting via USB to rule out wireless interference. Ensure No-Deadzone Mode is configured as desired.
• Problémy s programováním tlačítka Zpět: Refer to the specific programming instructions for the MR/ML buttons. If the issue persists, a factory reset of the controller might be necessary, followed by re-programming.
• L1/R1 buttons sticking: If buttons feel stuck, ensure no debris is lodged around them. Gentle cleaning may help. If the issue is persistent, it may indicate a hardware fault.

7. Specifikace

8. Uživatelské tipy

• For PC gaming, the controller is often recognized as an X360 controller, which can simplify setup for many games.
• The battery generally holds a charge for a long time, providing extended gameplay sessions.
• If experiencing issues with joystick sensitivity on PC, ensure you have the correct drivers installed or consider using third-party software like DS4Windows (though some users report mixed compatibility).
• When connecting to Android TV boxes, the process is similar to connecting a standard DualShock controller via Bluetooth.

9. Často kladené otázky (FAQ)

Q: Is this product wireless?

A: Yes, it is a wireless controller.

Q: Is the controller compatible with PC?

A: Yes, it is compatible with PC, supporting both wired and wireless (Bluetooth) connections.

Q: Does it work with PS5?

A: This controller is primarily designed for PS4 consoles and PC. While it may physically connect, full functionality with PS5 games or the PS5 system is not guaranteed and generally not supported for PS5 exclusive titles.

Q: How do I program the MR/ML back buttons?

A: Specific programming instructions for the MR/ML buttons are typically provided in a separate guide or can be found through a combination of button presses. Please refer to the manufacturer's support resources for detailed steps.

Q: Does it have a built-in speaker, touchpad, light bar, and gyroscope?

A: Yes, the controller features a built-in speaker, a functional touchpad, an integrated light bar, and a 6-axis gyroscope for motion sensing.

Otázka: Jaká je výdrž baterie?

A: The controller has a 600mAh battery, which provides a long-lasting gaming experience.

Q: Can I use this controller with my Android or iOS phone?

A: Yes, the controller is compatible with both Android and iOS devices via Bluetooth.

10. Záruka a podpora

This product is backed by a commitment to quality. For any issues or support, please contact the DATA FROG Official Store or refer to their official website for further assistance. The product typically includes free returns within 90 days and guarantees for fast delivery, with refunds available for late delivery, lost packages, or damaged items.