Příručky+

S4A SA-0103

Uživatelská příručka pro kovovou klávesnici pro kontrolu přístupu S4A RFID SA-0103

Electronic Lock System with Keychains and Waterproof Rainproof Cover

1. Úvod

Thank you for choosing the S4A RFID Metal Access Control Keypad (Model SA-0103). This device provides a secure and convenient solution for managing access to your premises. Featuring a robust metal construction, support for RFID keytags/cards, and PIN code entry, it is designed for reliable operation. When installed outdoors, the included rainproof cover offers additional protection against environmental elements. This manual will guide you through the installation, operation, and maintenance of your access control system.

2. Specifikace

Keypad Specifications
FunkcePopis
Název značkyS4A
Číslo modeluSA-0103
Velikost120 mm x 56 mm x 18 mm
Práce svtageDC 12V
Statický proud≤30 mA
Rozsah čtení3 cm ~ 8 cm
Kapacita2000 uživatelé
Okolní teplota-25 °C ~ 60 °C
Okolní vlhkost10 % ~ 90 %
Výstup elektrického zámku≤3A
Alarmový výstup≤20A
Output Short Circuit Protection Time≤100μS
Otevřený čas0 ~ 99 seconds (adjustable)

Rainproof Housing Dimensions:

  • Outer size: 150mm x 104mm x 90mm
  • Inner size: 135mm x 89mm x 84mm
Dimensions of the S4A SA-0103 access control keypad, showing a height of 120mm and width of 56mm.
Figure 2.1: Keypad Dimensions
Table of detailed specifications for the Zinc Alloy Standalone access controller, including size, voltage, current, reading range, user capacity, temperature, humidity, and output ratings.
Obrázek 2.2: Podrobné technické specifikace
Dimensions of the rainproof housing, showing outer dimensions of 150mm height, 104mm width, and 90mm depth, and inner dimensions of 135mm height, 89mm width, and 84mm depth.
Figure 2.3: Rainproof Housing Dimensions

3. Obsah balení

Your S4A RFID Metal Access Control Keypad package typically includes the following items:

  • 1x S4A RFID Metal Access Control Keypad (Model SA-0103)
  • 7x RFID Keytags or Thin Cards (quantity and type may vary based on purchase option)
  • 1x Rainproof Housing (for outdoor installation)
  • Montážní šrouby a hmoždinky
  • Uživatelská příručka (tento dokument)
Image showing the S4A SA-0103 keypad, seven blue RFID keytags, and a black rainproof housing, indicating a complete kit.
Figure 3.1: Typical Package Contents with RFID Keytags and Rainproof Cover
Image showing the S4A SA-0103 keypad, seven white RFID thin cards, and a black rainproof housing, indicating a complete kit.
Figure 3.2: Typical Package Contents with RFID Thin Cards and Rainproof Cover

4. Konec produktuview

The SA-0103 access control keypad is designed for durability and ease of use. Its metal casing provides enhanced security and longevity. The keypad features backlit buttons for visibility in low-light conditions, and LED indicators to show the system's status. A built-in doorbell function adds convenience.

Detailní záběr view of the S4A SA-0103 keypad, highlighting the LED indicator, status LED, program keypad, doorbell button, and screws for fixing.
Figure 4.1: Keypad Features and Components
Video 4.1: S4A Metal Keypad Product Showcase

5. Nastavení a instalace

Proper installation is crucial for the optimal performance and security of your access control system. It is recommended that installation be performed by a qualified technician.

5.1. Montáž klávesnice

  1. Choose a suitable mounting location near the door, ensuring it is easily accessible and within reach of necessary wiring.
  2. If installing outdoors, first mount the rainproof housing. The keypad is surface waterproof, but the housing provides additional protection against direct rain and harsh weather.
  3. Use the keypad dimensions (120mm x 56mm) and the rainproof housing dimensions (150mm x 104mm) as a guide for placement.
  4. Mark the drilling points on the wall using the keypad's backplate as a template.
  5. V případě potřeby vyvrtejte otvory a vložte hmoždinky.
  6. Připevněte klávesnici ke zdi pomocí dodaných šroubů.
S4A SA-0103 keypad installed on an outdoor wall next to a door, demonstrating a typical installation scenario.
Obrázek 5.1: Přample Outdoor Installation of Keypad
S4A SA-0103 keypad installed on a brick wall next to a door, showing another typical outdoor installation.
Figure 5.2: Keypad Installed on a Brick Wall

5.2. Schéma zapojení

The keypad requires a DC 12V power supply and connects to an electric lock, an exit button, and optionally a doorbell. Follow the wiring diagrams carefully.

Basic wiring diagram for the S4A SA-0103 access control system, showing connections between a power supply, the SA-0103 keypad, an electric lock, and an exit button.
Figure 5.3: Basic Wiring Diagram
Detailed wiring diagram for the S4A SA-0103 access control system, illustrating connections for power supply, keypad, doorbell, exit button, and various electric lock types (NO/NC).
Obrázek 5.4: Podrobné schéma zapojení

Připojení kabeláže:

  • +12V a GND: Connect to a stable DC 12V power supply.
  • ZÁMEK: Connect to the electric lock. Ensure compatibility with your lock type (Normally Open - NO or Normally Closed - NC).
  • REX/BL: Connect to the exit button.
  • BELL1 and BELL2: Connect to an external doorbell.
  • AUX_IN and AUX_OUT: Auxiliary input/output for advanced functions (refer to specific programming instructions for details).
  • COM, NO, NC: These terminals are for connecting various types of electric locks. COM is common, NO (Normally Open) means the circuit is open when the lock is de-energized, and NC (Normally Closed) means the circuit is closed when the lock is de-energized. Choose the appropriate connection based on your lock's requirements.

Warning: Incorrect wiring can damage the device or connected components. Always ensure power is disconnected before performing any wiring.

6. Návod k obsluze

The SA-0103 keypad supports multiple access methods and programming options.

6.1. Základní obsluha

  • Access with RFID: Present a programmed RFID keytag or card to the keypad. The door will unlock for the set open time.
  • Access with PIN: Enter your programmed PIN code followed by the '#' key. The door will unlock for the set open time.
  • Funkce dveřního zvonku: Press the bell icon button on the keypad to activate the connected doorbell.

6.2. Režim programování

To enter programming mode, you typically need to enter a master code. The default master code is often 123456 or 999999, but please refer to the specific programming guide that came with your unit for the exact default code and programming steps.

General Programming Steps (may vary slightly):

  1. Vstupte do režimu programování: Enter the Master Code, then press #. The LED indicator will change (e.g., from red to green or flash).
  2. Add User (RFID Card/Keytag):
    1. While in programming mode, enter the command for adding a user (e.g., 1).
    2. Present the new RFID card/keytag na klávesnici.
    3. The keypad will beep to confirm successful addition.
  3. Add User (PIN Code):
    1. While in programming mode, enter the command for adding a user (e.g., 2).
    2. Enter the desired PIN code (4-6 digits), then press #.
    3. Re-enter the PIN code, then press # znovu pro potvrzení.
    4. The keypad will beep to confirm successful addition.
  4. Smazat uživatele:
    1. While in programming mode, enter the command for deleting a user (e.g., 3).
    2. To delete by RFID: Present the RFID card/keytag k odstranění.
    3. To delete by PIN: Enter the PIN code to be deleted, then press #.
    4. The keypad will beep to confirm deletion.
  5. Změna hlavního kódu:
    1. While in programming mode, enter the command for changing the master code (e.g., 8).
    2. Enter the new Master Code, then press #.
    3. Re-enter the new Master Code, then press # znovu pro potvrzení.
  6. Adjust Open Time:
    1. While in programming mode, enter the command for adjusting open time (e.g., 9).
    2. Enter the desired open time in seconds (0-99), then press #.
  7. Ukončete režim programování: Stiskněte * or wait for a timeout.

Note: Always refer to the specific programming instructions provided with your device for exact commands and sequences.

7. Údržba

  • Čištění: Otřete povrch klávesnice měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu a elektronické součástky.
  • Venkovní ochrana: If installed outdoors, regularly check that the rainproof cover is securely in place and free from cracks or damage. Ensure no water can accumulate around the keypad.
  • Kontrola elektroinstalace: Pravidelně kontrolujte všechna kabelová připojení, abyste se ujistili, že jsou bezpečná a bez koroze nebo poškození.
  • Kontrola funkčnosti: Test the keypad's functionality (RFID, PIN, doorbell, exit button) regularly to ensure it is operating correctly.

8. Řešení problémů

  • Klávesnice nereaguje: Check the power supply connection. Ensure the DC 12V power adapter is functioning and properly connected to the keypad's +12V and GND terminals.
  • Dveře se po platném vstupu neodemknou:
    • Verify that the user's RFID card/PIN is correctly programmed.
    • Check the wiring to the electric lock. Ensure it matches the lock type (NO/NC) and is securely connected.
    • Confirm the 'Open Time' setting is not set to 0 or an extremely short duration.
  • RFID card/keytag is not being read: Ensure the card is presented within the 3-8cm reading range. Check if the card is damaged or if it's a compatible type.
  • Doorbell button does not work: Inspect the wiring to the external doorbell (BELL1 and BELL2 terminals). Ensure the doorbell itself is functional.
  • Keypad beeps continuously or shows an error: This may indicate a tamper alarm or a system error. Refer to the specific programming guide for error codes or reset procedures. Disconnecting and reconnecting power can sometimes resolve temporary glitches.
  • Keypad is not backlit: Check power supply and wiring. If the issue persists, there might be an internal fault.

9. Uživatelské tipy

  • Secure Your Master Code: Always change the default master code immediately after installation and keep the new code in a secure, memorable location.
  • Venkovní ochrana: For outdoor installations, even though the keypad is surface waterproof, always utilize the provided rainproof cover. This significantly extends the lifespan of the device by protecting it from direct exposure to rain and harsh weather conditions.
  • Testujte pravidelně: Periodically test all access methods (RFID, PIN) and the exit button to ensure the system is functioning as expected.
  • Záložní přístup: Consider having a backup method of entry in case of power failure or system malfunction.

10. Záruka a podpora

This S4A RFID Metal Access Control Keypad comes with a 2-year guarantee, ensuring quality and reliability. For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please contact your original vendor or the S4A customer support channel.

Související dokumenty - SA-0103

Předview Inteligentní automatický systém pro bytové dveře: Instalační a provozní příručka
Komplexní průvodce inteligentním automatickým systémem pro bytová vrata S4A s podrobnými technickými specifikacemi, popisem příslušenství, postupy mechanické a elektrické instalace, nastavením parametrů a zajištěním kvality produktu.
Předview Produktový katalog S4A: Systémy kontroly přístupu a elektromagnetické zámky
Prozkoumejte komplexní katalog produktů S4A, který nabízí širokou škálu systémů kontroly přístupu, elektromagnetických zámků, bezdrátových dveřních zámků, čteček otisků prstů a automatických dveřních pohonů. Objevte inovativní bezpečnostní řešení pro různé aplikace.
Předview S4A 1CH Tuya WiFi Relay Module: 7-32V Single Channel Smart Switch
Discover the S4A 1CH Tuya WiFi Relay Module, a versatile single-channel switch supporting 7-32V input. This module enables wireless control of electrical devices via WiFi, featuring a 10A output, micro USB or DC input, and compatibility with the Tuya platform for smart home automation.
Předview CS SA-32 Access Control System - Reference and Installation Manual
Comprehensive reference and installation manual for the CS SA-32 access control system. Covers product presentation, technical specifications, installation, programming, master cards, security modes, factory reset, and warranty information. Details user access management via RFID cards and passwords.
Předview Návod k obsluze bezpečnostního trezoru Sanctuary Diamond | Modely SA-DIA1, SA-DIA2, SA-DIA3
Komplexní návod k obsluze bezpečnostních trezorů Sanctuary Diamond, včetně modelů SA-DIA1, SA-DIA2, SA-DIA3, SA-DIA1-D, SA-DIA2-D a SA-DIA3-D. Zahrnuje nastavení, programování elektronických zámků, obsluhu, bezpečnostní funkce a doživotní záruku.
Předview Illustra Pro Gen3 Series: Installation and Configuration Guide
This guide provides comprehensive instructions for the installation and configuration of Illustra Pro Gen3 Series security cameras, covering setup, network connectivity, security features, and advanced operational settings.