AAON ASM01898 GPC-XP System Manager Touch Screen II Controller
Specifikace produktu
- Zobrazit: 4.3″ 480×272 WQVGA RGB TFT LCD Touch Screen Display with 16 million colors
- Napájení: 24 VAC Single 60 Hz
- Spotřeba energie: Maximálně 6 VA
- Provozní vlhkost: 0–95 % relativní vlhkosti bez kondenzace
- Communication Connection Protocol: RS-485
- Materiál bydlení: Plast
- Komunikace: Isolated RS-485
- User Interface Method: LCD dotyková obrazovka
Návod k použití produktu
Environmentální požadavky
Note: Initial programming of the GPC-XP must first be done with a personal computer using our Prism 2 software. The Prism 2 software can be downloaded from our website. The GPC-XP contains an onboard CommLink, allowing you to directly connect to a computer using a USB cable. Refer to the GPC-XP Controller Technical Guide for detailed instructions.
Elektrické a ekologické
- Ensure the power supply is connected to a 24 VAC Single 60 Hz source.
- Maintain the operating humidity between 0-95% RH non-condensing.
- Use the RS-485 communication protocol for connections.
Uživatelské rozhraní
The GPC-XP System Manager Touch Screen II provides a graphic-enhanced, menu-driven interface for viewing status, performing force modes, and setting schedules. Interact directly with the controller using the LCD touch screen.
FYZIKÁLNÍ
Directly Interact with the GPC-XP Controller
The System Manager Touch Screen II (SMTS II) for the GPC-XP Controller provides a direct, graphic-enhanced, menu-driven link to enable you to view the status, perform force modes, and set schedules for your GPC-XP Controller.
Environmentální požadavky
The SMTS II needs to be installed in an environment that can maintain a temperature range between 14°F and 158°F and a humidity range between 0% and 95% RH (non-condensing).
POZNÁMKA: Initial programming of the GPC-XP must first be done with a personal computer using our Prism 2 software. The Prism 2 software can be downloaded from our website—www.aaon.com/www.aaon.com/aaon-controls-technical-support. The GPC-XP contains an onboard CommLink, allowing you to directly connect to a computer using a USB cable. See the GPC-XP Controller Technical Guide for detailed instructions. This guide can be downloaded from www. aaon.com/products/general-purpose-controller.
Elektrické a ekologické
| Zobrazit | 4.3” 480×272 WQVGA RGB TFT LCD Touch
Screen Display w/ 16 million colors |
| Napájení | 24 VAC Single 60 Hz |
| Spotřeba energie | Maximálně 6 VA |
| Provozní teplota | 14 °F až 158 °F |
| Provozní vlhkost | 0-95% RH
Nekondenzující |
| Komunikační připojení | RS-485 |
| Protokol | Předávání tokenů HSI Open Protocol |
| Materiál bydlení | Plast |
| Komunikace | Isolated RS-485 |
| User Interface Method | LCD dotyková obrazovka |
ROZMĚRY
FLUSH WALL MOUNT
POVRCHOVÁ MONTÁŽ
INSTALACE
Montáž
- The System Manager Touch Screen II (SMTS II)is housed in a plastic enclosure designed for mounting in hollow drywall construction with the flush mount version or on a concrete, brick, or other solid wall surface with the surface mount version (optional).
- The flush mount version has integrated wing nut paddles that are tightened after installation to grip the drywall and hold the SMTS II in place. The surface mount version is designed to be installed in a double duplex outlet box (by others).
- Both mounting styles of the SMTS II feature an integral magnetically-secured face plate which can be easily removed for reset of the display when required. The SMTS II should be mounted at approximately eye level to allow for ease of programming and reading of the display.
Péče
The SMTS II should be cleaned with a soft, dust-free cloth. Do not use any liquid to clean your SMTS II. You should press the <Suspend> button located behind the cover to temporarily freeze the touch pad before you attempt to clean your screen.
Pro technickou pomoc kontaktujte podporu AAON
www.aaon.com/contact
FAQ
What is the recommended power supply for the GPC-XP Controller?
The recommended power supply is 24 VAC Single 60 Hz.
Can I directly connect the GPC-XP Controller to a computer?
Yes, you can directly connect the GPC-XP Controller to a computer using a USB cable through the on-board CommLink feature.
Dokumenty / zdroje
 |
AAON ASM01898 GPC-XP System Manager Touch Screen II Controller [pdfPokyny ASM01898, ASM01898 GPC-XP System Manager Touch Screen II Controller, GPC-XP System Manager Touch Screen II Controller, Manager Touch Screen II Controller, Touch Screen II Controller, Controller |