Thermalright Assassin X 120R Digital Black CPU Cooler Instruction Manual

Zavedení

The Thermalright Assassin X 120R Digital Black is a high-performance CPU air cooler designed to provide efficient thermal management for your computer's processor. It features a digital display for real-time monitoring of CPU and GPU parameters, advanced AGHP heat pipe technology, and a high-speed PWM fan. This manual provides essential information for the proper installation, operation, and maintenance of your CPU cooler.

Obsah balení

Please verify that all components are present in the package before proceeding with installation.

• Thermalright Assassin X 120R Digital Black CPU Cooler (Heatsink with integrated digital display and fan)
• Installation accessories (mounting brackets, screws, spacers for various sockets)
• Tepelná pasta

Nastavení a instalace

This section guides you through the installation process. Ensure your system is powered off and unplugged before beginning. Refer to your motherboard manual for specific instructions on CPU cooler installation points.

Kompatibilita

The Assassin X 120R Digital Black CPU Cooler is compatible with the following CPU sockets:

• Intel: LGA 1851, LGA 1700, LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA 1200
• AMD: AM4, AM5

Note: For AMD platform installation, the original motherboard backplate is required.

Obecné kroky instalace

1. Příprava základní desky: Identify the correct mounting brackets for your CPU socket (Intel or AMD). Remove any existing CPU cooler and clean the CPU surface of old thermal paste using isopropyl alcohol.
2. Naneste termální pastu: Apply a small amount of thermal paste (included) to the center of the CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient.
3. Instalace montážního hardwaru: Attach the appropriate backplate (if required for Intel) and standoffs to the motherboard. Secure the mounting arms to the standoffs.
4. Umístění chladiče: Carefully place the heatsink onto the CPU, aligning the mounting holes on the cooler with the mounting arms.
5. Zajistěte chladič: Use the provided screws to secure the heatsink to the mounting arms. Tighten screws in a diagonal pattern until snug, but do not overtighten.
6. Connect Fan and Digital Display Cables:
   • Připojte 4pinový kabel PWM ventilátoru ke konektoru CPU_FAN na základní desce.
   • Connect the digital display cable to an available USB 2.0 header on your motherboard.

Obrázek 1: Přesview of the Thermalright Assassin X 120R Digital Black CPU Cooler.

Figure 2: Dimensions of the Assassin X 120R Digital Black CPU Cooler, showing height, width, and depth.

Obrázek 3: Detail view of the AGHP (Anti-Gravity Heat Pipe) technology, highlighting the 4x6mm heat pipes for efficient heat transfer.

Figure 4: Dimensions of the TL-P12 120mm PWM fan, measuring 120x120x25mm.

Návod k obsluze

The Assassin X 120R Digital Black features a digital display and a PWM controlled fan for optimal performance.

Digital Display Functionality

The integrated digital screen provides real-time monitoring of critical system parameters. With the TRCC software, you can customize the display to show:

• Teplota CPU
• Využití CPU
• Graphics Card Temperature
• Graphics Card Utilization

This allows for easy access to system information at a glance. The display's color can also be adjusted via the TRCC software, potentially changing based on temperature or usage.

Figure 5: Close-up of the digital display showing CPU temperature and usage.

Obrázek 6: Přample of the TRCC software interface for customizing the digital display.

PWM Fan Control

The 120mm PWM fan automatically adjusts its speed (up to 2000 RPM) based on the CPU temperature, as controlled by your motherboard's fan headers. This ensures optimal cooling performance while minimizing noise levels. No manual adjustment is typically required for fan speed.

Údržba

Pravidelná údržba pomáhá zajistit dlouhou životnost a optimální výkon chladiče procesoru.

• Čištění prachu: Periodically (e.g., every 3-6 months), power off your computer and use compressed air to remove dust accumulation from the heatsink fins and fan blades. Hold the fan blades gently to prevent over-spinning during cleaning.
• Kontrola ventilátoru: Check the fan for any signs of wear, damage, or unusual noise. Ensure the fan cable is securely connected.
• Teplovodní pasta: While not frequently required, if you remove the cooler or notice significantly higher temperatures over time, consider reapplying fresh thermal paste.

Odstraňování problémů

If you encounter issues with your CPU cooler, refer to the following common troubleshooting steps:

• Ventilátor se netočí:
  • Ensure the 4-pin PWM fan cable is securely connected to the CPU_FAN header on the motherboard.
  • Check BIOS/UEFI settings to ensure the CPU fan control is enabled and configured correctly.
• Vysoké teploty procesoru:
  • Verify that the cooler is properly seated on the CPU and that mounting screws are tightened evenly.
  • Confirm that thermal paste was applied correctly and is making good contact.
  • Clean any dust accumulation from the heatsink fins and fan.
  • Zajistěte dostatečné proudění vzduchu uvnitř skříně počítače.
• Digital Display Not Working/Incorrect Readings:
  • Check if the USB 2.0 header cable for the display is securely connected to both the cooler and the motherboard.
  • Install or update the TRCC software from the Thermalright official webmísto.
  • Ensure the TRCC software is running in the background.

Specifikace

Informace o záruce

Thermalright products are manufactured to high-quality standards. For specific warranty terms and conditions, including duration and coverage, please refer to the official Thermalright webnebo se obraťte na prodejce. Uschovejte si doklad o koupi pro případ reklamace.

Podpora

For technical support, driver downloads (such as the TRCC software), or additional product information, please visit the official Thermalright webwebu. Můžete se také obrátit na prodejce, kde jste jej zakoupili.

Official Thermalright Webmísto: www.thermalright.com