Lamicall Mini Electric Bicycle Air Pump User Manual

Zavedení

Thank you for choosing the Lamicall Mini Electric Bicycle Air Pump. This ultra-compact and portable pump is designed for convenient and efficient tire inflation for various bicycles and scooters. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.

Image: The Lamicall Mini Electric Bicycle Air Pump is shown in the hand of a cyclist, highlighting its compact and portable design for on-the-go use.

Klíčové vlastnosti:

• Kompaktní a přenosné: Weighing only 139g with dimensions of 74 × 53 × 32 mm, it fits easily into pockets or bike bags.
• Rychlá inflace: Equipped with a high-speed motor, delivering an airflow of 24 liters/minute. Inflates a 700 × 25 C tire from 0 to 80 PSI in approximately 50 seconds, and from 80 to 100 PSI in 20 seconds.
• HD Digital Display & Automatic Stop: Features a digital LED display for real-time pressure readings (PSI/bar) and an automatic shut-off function once the preset target pressure is reached. Accuracy is within ±1 PSI. Includes a pressure memory function.
• Rychlé nabíjení typu C: Built-in 500 mAh battery supports Type-C fast charging, fully charging in about 30 minutes. A full charge can inflate approximately 2.5 700×23C tires.
• Široká kompatibilita: Supports 0-120 PSI and is compatible with road bikes, mountain bikes, urban bikes, electric bikes, and scooters. Includes both Presta and Schrader valve adapters. Features intelligent overheat protection.

Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

• Lamicall Mini Electric Bicycle Air Pump
• Nabíjecí kabel typu C.
• Adaptér ventilu Presta
• Schrader ventilový adaptér
• Needle Valve (for sports balls)
• Uživatelská příručka

Image: The electric air pump is displayed alongside its various accessories, including charging cable and valve adapters.

Nastavení

1. Počáteční nabíjení

Before first use, fully charge the air pump. Connect the provided Type-C charging cable to the pump's charging port and to a compatible USB power adapter (not included). The digital display will indicate charging status. A full charge takes approximately 30 minutes.

Image: The air pump is shown connected to a Type-C cable for charging, illustrating the charging process.

2. Attaching the Correct Valve Adapter

Identify the valve type on your tire (Presta or Schrader). The pump comes with adapters for both.

• Pro ventily Schrader: The pump's direct nozzle is compatible with Schrader valves. Simply screw it onto the tire valve.
• Pro ventily Presta: Attach the Presta valve adapter to the pump's nozzle, then screw the adapter onto the Presta tire valve.
• Pro sportovní míče: Use the needle valve adapter.

Image: A visual guide demonstrating how to connect the pump directly to Schrader valves or using the air hose and adapters for Presta valves and sports balls.

Návod k obsluze

1. Zapnout

Press and hold the power button for 2 seconds to turn on the pump. The digital display will light up, showing the current tire pressure.

2. Select Pressure Unit

Briefly press the power button to cycle through pressure units: PSI and BAR.

3. Set Target Pressure

Use the '+' and '-' buttons to adjust the desired target pressure. The pump has a memory function and will recall the last set pressure. The maximum pressure is 120 PSI.

Image: The pump's digital display clearly shows the current pressure reading and the '+' and '-' buttons for setting the target pressure.

4. Spusťte nafukování

Once the target pressure is set, press the power button again to start inflation. The pump will automatically stop when the target pressure is reached.

Image: The electric air pump is shown actively inflating a bicycle tire, demonstrating its use in a real-world scenario.

5. Vypněte

Press and hold the power button for 2 seconds to turn off the pump. It will also automatically power off after a period of inactivity.

Důležité poznámky:

• Ensure the valve connection is secure to prevent air leakage.
• Do not operate the pump continuously for more than 10 minutes to prevent overheating. Allow it to cool down if necessary.
• Always check the recommended tire pressure for your specific tire before inflation.

Údržba

1. Péče o baterie

To prolong battery life, it is recommended to store the pump fully charged after each use. If not used for an extended period, charge it every 3 months.

2. Čištění

Otřete čerpadlo měkkým hadříkemamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the charging port and air outlet are free from dust and debris.

3. Skladování

Store the pump in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.

Odstraňování problémů

Specifikace

Image: The air pump is depicted with icons representing its wide compatibility across urban bikes, road bikes, mountain bikes, electric bikes, and scooters.

Záruka a podpora

Informace o záruce

Lamicall products are designed and manufactured to the highest quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.

Záruka se nevztahuje na poškození způsobené:

• Nesprávné použití nebo instalace
• Neoprávněné opravy nebo úpravy
• Accidental damage, misuse, or neglect
• Běžné opotřebení

Zákaznická podpora

If you encounter any issues or have questions regarding your Lamicall Mini Electric Bicycle Air Pump, please contact our customer support team. For the fastest service, please have your model number (BCEP01-EU-BK) and purchase details ready.

You can typically find support contact information on the Lamicall official webwebu nebo prostřednictvím zákaznického portálu vašeho prodejce.

Video o produktu