Zavedení
This manual provides comprehensive instructions for the safe assembly, proper use, and maintenance of your tectake Metal Display Cabinet, model 406418. Please read all instructions carefully before beginning assembly and retain this manual for future reference. Ensure all components are present and undamaged before proceeding.
Bezpečnostní pokyny
- Vyžaduje sestavení pro dospělé: Tento výrobek obsahuje malé části a vyžaduje montáž dospělou osobou. Během montáže držte děti a domácí zvířata v dostatečné vzdálenosti.
- Použijte vhodné nástroje: Ensure you have the necessary tools for assembly (e.g., screwdriver, hammer if needed).
- Stabilní povrch: Skříňku sestavte na čistém, rovném a stabilním povrchu, abyste předešli poškození nebo zranění.
- Ochrana proti převrácení: Always install the provided anti-tip hardware to secure the cabinet to a wall. This prevents accidental tipping, which can cause serious injury.
- Rozložení hmotnosti: Distribute weight evenly on shelves. Do not exceed the maximum load capacity per shelf (25 kg). Place heavier items on lower shelves.
- Vyhněte se přetížení: Do not overload the cabinet. Overloading can compromise stability and cause damage.
- Manipulace se sklem: Handle glass components with care to avoid breakage and injury. Wear protective gloves if necessary.
- Pravidelné kontroly: Pravidelně kontrolujte všechny upevňovací prvky, zda jsou pevně utažené. V případě potřeby je dotáhněte.
Obsah balení
Before beginning assembly, please verify that all the following components are present and undamaged:
- Metal Display Cabinet components (frame, panels, doors)
- Adjustable glass shelves (2 pieces)
- Hardware proti převrácení
- Montážní materiál (šrouby, vruty atd.)
- Návod k montáži
If any parts are missing or damaged, please contact tectake customer support before proceeding with assembly.
Specifikace
| Číslo modelu: | 406418 |
| Celkové rozměry (Š x H x V): | 80 cm x 37 cm x 90.5 cm (přibližně 31.5 palce x 14.6 palce x 35.6 palce) |
| Vnitřní rozměry (Š x H x V): | 79 cm x 30 cm x 68 cm (přibližně 31.1 palce x 11.8 palce x 26.8 palce) |
| Shelf Dimensions (W x D x H): | 79 cm x 30 cm x 2 cm (přibližně 31.1 palce x 11.8 palce x 0.8 palce) |
| Světlá výška: | 15 cm (approximately 5.9 in) |
| Adjustable Feet Height: | Up to 1.5 cm (approximately 0.6 in) |
| Materiál: | Powder-coated steel, Glass, Polypropylene |
| Tloušťka skla: | 4 mm |
| Max. nosnost na polici: | 25 kg (přibližně 55 liber) |
| Hmotnost produktu: | 21.8 kg (přibližně 48 liber) |
Obrázek 1: Rozměry produktu nadview. All measurements are approximate.
Montážní návod
Follow these steps carefully to assemble your tectake Metal Display Cabinet. It is recommended to have two people for assembly.
- Připravte oblast: Clear a spacious, clean, and flat area for assembly. Lay down a blanket or cardboard to protect the cabinet parts and your floor.
- Identifikujte komponenty: Unpack all components and compare them with the package contents list. Familiarize yourself with the different parts.
- Sestavte rám: Begin by connecting the main frame components (side panels, top, and bottom panels) using the provided screws and fasteners. Ensure all connections are secure but do not overtighten initially.
- Připevněte zadní panel: Carefully slide or attach the back panel into its designated grooves or mounting points. Secure it with the appropriate fasteners.
- Instalace nastavitelných nožiček: Screw the adjustable feet into the bottom corners of the cabinet. These can be adjusted later to level the cabinet on uneven floors.
- Install Door Hinges and Doors: Attach the hinges to the cabinet frame and then to the glass doors. Carefully mount the doors onto the cabinet. Ensure the doors swing freely and align correctly. The magnetic closures should engage properly.
- Vložte skleněné police: The cabinet features adjustable shelf supports. Insert the shelf pins into the desired height slots. Carefully place the glass shelves onto these supports. Ensure they are stable before placing items on them.
- Instalace kování proti převrácení: This is a critical safety step. Securely attach the anti-tip hardware to the top rear of the cabinet and then to a wall stud using appropriate wall anchors (not always included, check local building codes). This prevents the cabinet from tipping over.
- Konečné úpravy: Once assembled, gently move the cabinet to its final position. Adjust the feet to ensure the cabinet is level and stable. Check all screws and fasteners for tightness.
Obrázek 2: Detail of adjustable shelves, magnetic door closure, and ergonomic handles.
Obrázek 3: Fully assembled cabinet with doors open, illustrating storage capacity.
Návod k obsluze
- Otevírání a zavírání dveří: Gently pull the door handles to open the glass doors. The magnetic closure will release. To close, push the doors firmly until the magnets engage.
- Seřizovací police: To adjust the height of the glass shelves, carefully remove all items from the shelf. Lift the shelf slightly and remove the shelf pins from their current slots. Reinsert the pins into the desired new slots, ensuring they are level and secure. Then, carefully place the glass shelf back onto the pins.
- Načítání položek: Place items carefully onto the shelves, ensuring weight is distributed evenly. Do not exceed the maximum load capacity of 25 kg per shelf.
Obrázek 4: Cabinet in use, displaying various items.
Údržba
- Čištění skříně: Kovové povrchy otřete měkkým hadříkemamp cloth. Avoid abrasive cleaners or harsh chemicals, as they can damage the powder coating.
- Čištění skleněných panelů: Use a standard glass cleaner and a soft, lint-free cloth to clean the glass doors and side panels.
- Utírat prach: Regularly dust the cabinet and its contents to maintain its appearance. The elevated ground clearance facilitates easy cleaning underneath the cabinet.
- Zkontrolujte spojovací prvky: Periodically inspect all screws and connections to ensure they are tight. Retighten if necessary to maintain stability.
Obrázek 5: Easy maintenance due to elevated design.
Odstraňování problémů
- Cabinet is wobbly or unstable:
- Ensure all assembly screws are tightened. Adjust the leveling feet at the bottom of the cabinet to compensate for uneven flooring. Verify that the anti-tip hardware is securely installed to a wall stud.
- Dveře se nezavírají správně nebo jsou špatně zarovnané:
- Check the hinge alignment and adjust if necessary. Ensure the magnetic closures are properly positioned and free from obstruction. Verify that the cabinet itself is level.
- Glass shelves are not level:
- Ensure the shelf pins are inserted into corresponding slots on both sides of the cabinet at the same height. Check that the cabinet is level using the adjustable feet.
- Chybějící nebo poškozené části:
- Do not proceed with assembly. Contact tectake customer support immediately for assistance and replacement parts.
Záruka a podpora
For warranty information, technical support, or to order replacement parts, please refer to the contact information provided with your purchase documentation or visit the official tectake webweb. Při kontaktování podpory mějte prosím k dispozici číslo modelu (406418) a datum zakoupení.