Návod k obsluze bezdrátového HDMI vysílače a přijímače Llano S850

Konec produktuview

The Llano S850 is an upgraded Type-C wireless HDMI transmitter and receiver system designed for seamless audio and video transmission. It supports Ultra 4K decode input and 1080P@60Hz output, offering both traditional transmitter/receiver mode and a receiver-only mirroring mode. This device provides a plug-and-play experience with dual-band 5G+2.4G wireless technology for stable transmission up to 50 meters (165 feet).

Image: The Llano S850 Wireless HDMI Transmitter (TX) and Receiver (RX) units.

Co je v krabici

Balení obsahuje následující komponenty:

• Transmitter (TX) unit
• Receiver (RX) unit
• HDMI kabel
• Nabíjecí kabel USB
• Prodlužovací kabel vysílače

Pokyny pro nastavení

The Llano S850 offers two primary connection methods: Transmitter + Receiver mode for traditional wireless HDMI, and Receiver Only mode for direct mirroring from compatible devices.

Method 1: Transmitter + Receiver Mode (Plug & Play)

This mode is ideal for connecting devices like laptops, cameras, or TV set-top boxes to a display.

1. Zapnutí přijímače (RX): Connect the USB Charging Cord to the RX unit and plug the other end into a 5V power adapter or a USB port on your monitor/TV.
2. Connect the Receiver (RX) to Display: Use the provided HDMI Cord to connect the RX unit to an HDMI input port on your TV, monitor, or projector.
3. Connect the Transmitter (TX) to Source Device: Plug the TX unit directly into the Type-C port of your laptop, tablet, or smartphone. If your device requires additional power or the port is recessed, use the Transmitter Extension Cable.
4. Automatické připojení: The TX and RX units will automatically pair. Your source device's screen will be mirrored or extended to the display.
5. Power Requirement Note: If your source device (e.g., computer) cannot adequately power the TX unit, connect the TX unit's Type-C charging port to a 5V/2A power adapter.

Image: Visual guide for Connection Method 1 (Transmitter + Receiver) and Method 2 (Receiver Only).

Image: Detailed steps for setting up the Llano S850 in Transmitter + Receiver mode.

Method 2: Receiver Only Mode (Direct Mirroring)

This mode allows direct screen mirroring from compatible smartphones, tablets, and computers to the display using the RX unit alone.

1. Power and Connect Receiver (RX): Follow steps 1 and 2 from Method 1 to power the RX unit and connect it to your display.
2. Pro telefony Android:
   • Pull down the notification bar on your Android phone.
   • Tap the "Wireless Projection" or "Screen Mirroring" icon.
   • V seznamu dostupných zařízení vyberte „LLANO-S850“.
3. For Apple Phones (iPhone 15/16/17 Series with Type-C):
   • Klepnutím na plovoucí kruh (AssistiveTouch) nebo přejetím prstem dolů z pravého horního rohu otevřete Ovládací centrum.
   • Tap "Screen Mirroring".
   • Select "LLANO-S850".
   • Enter the PIN code (e.g., "1538") displayed on your monitor/TV when prompted.
4. Pro Apple Mac:
   • Click the Control Center icon in the menu bar.
   • Select "Screen Mirroring".
   • Choose "LLANO-S850" from the display options.
   • Enter the PIN code (e.g., "1538") displayed on your monitor/TV when prompted.
5. For Windows 10 (and above) PCs:
   • Stiskněte tlačítko Klávesa Windows + K zároveň.
   • V seznamu dostupných bezdrátových displejů vyberte „LLANO-S850“.

Image: Steps for connecting an Android phone in Receiver Only mode.

Image: Steps for connecting an Apple iPhone in Receiver Only mode.

Image: Steps for connecting an Apple Mac in Receiver Only mode.

Image: Steps for connecting a Windows PC in Receiver Only mode.

Návod k obsluze

Režimy zobrazení

The Llano S850 supports two display modes:

• Zrcadlový režim: Duplikuje obrazovku zdrojového zařízení na připojený displej.
• Rozšířený režim: Extends your source device's desktop, allowing for a larger workspace. This mode is typically configured through your operating system's display settings.

Image: Illustration of Copy Mode (Mirror) and Extended Mode for multi-display setups.

Pausing/Resuming Casting

In Transmitter + Receiver mode, you can pause or resume casting by pressing the button on the Transmitter (TX) unit. This provides quick control over your display output.

Image: A hand pressing the button on the TX unit for one-click disconnect or reconnect.

Orientace obrazovky

To switch between landscape and portrait mode on the display, press the button on the Receiver (RX) unit.

Nabíjení během používání

The TX unit features a Type-C charging port, allowing you to charge your smartphone, laptop, or other compatible devices while simultaneously using the wireless HDMI function. This eliminates the need for an external power source for your source device during use.

Image: The Llano S850 transmitter connected to a phone, demonstrating simultaneous charging.

Údržba

To ensure the longevity and optimal performance of your Llano S850 Wireless HDMI system, follow these maintenance guidelines:

• Čištění: K čištění vnější strany vysílací a přijímací jednotky použijte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani abrazivní materiály.
• Skladování: Pokud zařízení nepoužíváte, skladujte ho na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Zacházení: Handle the units with care to prevent physical damage. Avoid dropping or subjecting them to strong impacts.
• Větrání: Ensure proper ventilation around the units during operation to prevent overheating.

Odstraňování problémů

If you encounter issues with your Llano S850, refer to the following common problems and solutions:

• No Signal/No Video Output:
  • Ensure both the Transmitter (TX) and Receiver (RX) units are properly powered. The RX unit requires external power via the USB charging cord.
  • Verify that the HDMI cable is securely connected between the RX unit and the display.
  • Confirm the display is set to the correct HDMI input source.
  • If using the TX unit, ensure it is firmly connected to your source device's Type-C port. If the device's port is recessed or a protective case is used, the connection might be loose. Try using the Transmitter Extension Cable if available, or remove the case.
  • If your source device cannot power the TX unit sufficiently, connect a 5V/2A power adapter to the TX unit's Type-C charging port.
• Audio Works, No Video:
  • Check the display's input settings to ensure it's receiving both audio and video from the HDMI source.
  • Zkuste jiný HDMI kabel.
  • Restart both the source device and the display.
• Device Gets Hot During Use:
  • It is normal for electronic devices to generate some heat during operation. However, if the device becomes excessively hot, ensure it has adequate ventilation and is not covered.
  • If overheating persists or causes performance issues, discontinue use and contact customer support.
• Cannot Connect in Receiver Only Mode (e.g., Android Phone):
  • Ensure your device supports wireless projection or screen mirroring (e.g., Miracast for Android, AirPlay for Apple).
  • Some Android phones may require specific settings or apps for wireless display. Refer to your phone's manual.
  • Ensure the RX unit is powered on and visible in your device's wireless display settings.
• Short Transmission Distance or Unstable Signal:
  • Wireless transmission distance can be affected by walls, obstacles, and other wireless interference. Try to minimize obstructions between the TX and RX units.
  • Ensure both units are within the recommended operating range (up to 50 meters/165 feet in open areas).
  • Avoid placing the units near other strong wireless signals or electronic devices that may cause interference.

Specifikace

Záruka a podpora

Llano provides comprehensive support for its products:

• Záruční krytí: Využijte 2letou záruku od data nákupu.
• Vrácení: 30-day hassle-free returns.
• Náhrady: Free replacement for 15 days, and quality issue replacement for up to 18 months.
• Zákaznická podpora: 24/7 specialist support is available for any inquiries or assistance.

Image: Llano's commitment to customer support and warranty.

Oficiální video produktu