1. Bezpečnostní informace
Please read and understand all safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Nepřekračujte maximální nosnost 800 liber.
- Be cautious of sharp edges and corners during assembly and use.
- Always unplug the charging station and LED lights from the power source before making the bed, cleaning, or performing any maintenance.
- Keep the charging station and LED lights away from water and other liquids to prevent electrical hazards.
- Vždy pečlivě dodržujte montážní pokyny, abyste zabránili nestabilitě nebo zhroucení rámu postele.
- Před použitím se ujistěte, že jsou všechna připojení k nabíjecí stanici a LED světelům bezpečná.
2. Nastavení a montáž
This bed frame is designed for straightforward assembly. All necessary tools and labeled accessories are included.
2.1 Vybalení a příprava
- Opatrně otevřete obal a vyjměte všechny součásti.
- Verify that all parts and hardware are present by comparing them with the included parts list.
- Lay out all components on a clean, soft surface (e.g., a rug or blanket) to prevent scratches.
2.2 Montážní kroky
- Sestavte čelo postele: Attach the wingback sections to the main headboard panel. Ensure the hidden storage compartment mechanism is correctly aligned.
- Instalace nabíjecí stanice a LED světel: Secure the charging station and LED light strip into the designated slots within the headboard. Connect the wiring as per the diagram.
- Construct the Side Rails and Footboard: Připevněte boční lišty k čelu a nohám postele pomocí dodaného spojovacího materiálu. Ujistěte se, že všechny šrouby jsou bezpečně utažené.
- Připevnění podpůrných nohou: Fasten the sturdy round legs to the bed frame.
- Instalace lamel: Place the Velcro-secured wooden slats across the bed frame. Ensure they are evenly spaced and firmly attached to the Velcro strips on the frame for noise-free support.
- Závěrečná kontrola: Double-check all connections and ensure the frame is stable before placing a mattress on it.
Figure 2.2.1: Overall dimensions and structure of the Jocoevol Full LED Bed Frame.
Figure 2.2.2: Detail of the bed frame's sturdy metal legs, Velcro-secured slats for easy installation, and noise-free structure with EVA padding.
3. Návod k obsluze
Nabíjecí stanice 3.1
The headboard features a built-in charging station with 2 AC outlets, 1 USB port, and 1 Type-C port.
- Připojení napájení: Ujistěte se, že je napájecí kabel rámu postele bezpečně zapojený do funkční zásuvky.
- Using Outlets/Ports: Plug your devices into the appropriate AC outlets, USB-A, or USB-C ports for charging.
- Bezpečnost: Do not overload the charging station. Disconnect devices when not in use.
Figure 3.1.1: Integrated charging station with multiple power options for convenience.
Obrázek 3.1.2: Detailní view of the 3-in-1 charging station, specifying 2 AC outlets (125V/12A), USB-A (5V/2A), and USB-C (5V/2A) ports.
3.2 RGB LED osvětlení
The headboard features built-in RGB LED lighting with various colors and effects.
- Řízení: The LED lights can be controlled via a dedicated app (iOS/Android) or the included remote control.
- Vlastnosti: Explore over 16 million colors, 20+ light effects, and dynamic modes.
- Synchronizace hudby: The lights can synchronize with music beats, changing rhythmically.
- Jas a načasování: Adjust brightness levels and set timing functions using the control options.
Figure 3.2.1: The RGB LED lighting system, demonstrating music synchronization and control options via app or remote.
3.3 Hidden Storage Headboard
The headboard includes a hidden storage compartment and side pockets.
- Přístup k úložišti: The top shelf of the headboard flips open to reveal a 6.9''D x 13.2''H compartment.
- Boční kapsy: Utilize the pockets on the bed wings for convenient storage of small items like books or tablets.
Figure 3.3.1: The hidden storage compartment within the headboard, shown open with various items stored.
Figure 3.3.2: The hidden storage headboard with an open display area, providing both concealed and accessible storage.
4. Údržba
4.1 Cleaning the Bed Frame
- Upholstered Surfaces: For the corduroy fabric, gently vacuum with an upholstery attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner following the product instructions, testing on an inconspicuous area first.
- Wood and Metal Surfaces: Otřete měkkým, damp hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky, které by mohly poškodit povrchovou úpravu.
4.2 Elektrické součásti
- Nabíjecí stanice: Keep the charging ports free of dust and debris. Do not insert foreign objects into the ports.
- LED světla: The LED lights have a lifespan of over 100,000 hours and generally require no maintenance. If issues arise, refer to the troubleshooting section.
- Generál: Always ensure the bed frame is unplugged from the power source before cleaning or inspecting electrical components.
4.3 Structural Maintenance
- Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability and prevent noise.
- Zkontrolujte dřevěné lamely, zda nevykazují známky poškození nebo opotřebení. Pro zajištění správné opory matrace ihned vyměňte všechny zlomené lamely.
5. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Rám postele se kymácí nebo je hlučný. | Loose bolts or screws; improperly installed slats. | Ensure all bolts and screws are tightened. Check that slats are properly seated and secured to the Velcro strips. |
| Nabíjecí stanice nefunguje. | Power cord unplugged; faulty outlet; device not properly connected. | Verify the bed frame's power cord is securely plugged into a working wall outlet. Test the outlet with another device. Ensure your device is correctly plugged into the charging port. |
| LED lights are not turning on or functioning correctly. | Power cord unplugged; loose LED connection; remote/app issue. | Check the main power connection. Ensure the LED light strip is properly connected to its power source within the headboard. Replace remote batteries if applicable. Re-pair the remote or app if necessary. |
| Hidden storage compartment does not open/close smoothly. | Překážka; problém s pantem. | Remove any items that may be obstructing the mechanism. Inspect hinges for damage or misalignment. |
6. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | C-1667 |
| Velikost | Plný |
| Materiál | Engineered Wood, Corduroy, Metal |
| Rozměry produktu (D x Š x V) | 83.86 cm x 54.13 cm x 43.5 cm |
| Hmotnost položky | 98.7 libry |
| Doporučená maximální hmotnost | 800 libry |
| Vlastnosti čela postele | Corduroy Upholstered, Wingback, Hidden Storage, RGB LED Lighting, Charging Station |
| Porty nabíjecích stanic | 2 AC Outlets (125V/12A), 1 USB-A Port (5V/2A), 1 USB-C Port (5V/2A) |
| LED osvětlení | RGB, 16+ Million Colors, 20+ Effects, Music Sync, App/Remote Control |
| Potřebujete pružinovou talířovou pružinu | Žádný |
| Kompatibilní velikost matrace | Plný |
Obrázek 6.1: Vizuální znázornění klíčových specifikací produktu.
7. Informace o záruce
Specific warranty details for the Jocoevol Full LED Bed Frame (Model C-1667) are not provided in the product information. Please refer to the retailer's return policy or contact Jocoevol customer support for warranty inquiries.
8. Zákaznická podpora
If you have any questions or require assistance with your Jocoevol Full LED Bed Frame, please contact our dedicated support team. We aim to respond to all inquiries within 24 hours.
- Kontaktní metoda: Refer to the contact information provided with your purchase or on the official Jocoevol webmísto.
- Before Contacting: Please have your model number (C-1667) and purchase details ready to expedite the support process.