Flyrivergo Pro Lapidary Saw WYS-14-2 Instruction Manual

1. Úvod

The Flyrivergo Pro Lapidary Saw WYS-14-2 is a versatile and compact tool designed for cutting, grinding, and polishing various materials, including jade, wood, and beeswax. Equipped with a 1380W motor and adjustable speed up to 15,000 RPM, it offers robust cutting power with low vibration. This equipment features an advanced water-cooling system and a flexible shaft for detailed work. It is primarily intended for gemstone cutting and lapidary applications, not as a substitute for a dedicated woodworking table saw.

2. Bezpečnostní pokyny

Always prioritize safety when operating power tools. Failure to follow these instructions may result in injury or damage to the equipment.

• Přečtěte si manuál: Thoroughly read and understand all instructions before operation.
• Osobní ochranné prostředky (OOP): Always wear safety goggles to protect your eyes from flying debris. A dust mask is recommended when cutting wood or dry materials.
• Odpojení napájení: Disconnect the power cord from the outlet before making any adjustments, changing blades, or performing maintenance.
• Stabilní pracovní plocha: Ensure the saw is placed on a stable, level, and secure workbench to prevent tipping or movement during operation.
• Prevence náhodného spuštění: Utilize the separate on/off button to prevent unintended machine activation.
• Ochrana čepele: Always use the blade protector to block partial flying debris and dust.
• Vodní chlazení: When using the diamond blade, ensure the water-cooling system is active and the blade is never operated dry.
• Ochrana proti přetížení: The built-in overload protection automatically reduces rotation speed if excessive load is detected. If RPM decreases suddenly, reduce the feed speed to prevent motor damage.
• Materiálová kompatibilita: This saw is primarily for gemstones. While it can cut wood, it lacks anti-kickback protection and other safety features found on dedicated woodworking saws. Exercise extreme caution when cutting wood.
• Udržujte jasno: Keep hands, hair, loose clothing, and other objects away from moving parts and blades.

3. Obsah balení

Ověřte, zda jsou všechny níže uvedené položky součástí balení. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

Obrázek 3.1: Veškeré dodávané příslušenství a komponenty.

• Rock Saw Machine
• Saw Blades (Diamond-coated Steel Blade, Tungsten Carbide Tipped Blade)
• PTFE páska
• Plastic Sink
• Push Tool
• Chránič čepele
• Angle Cutting Ruler (Fence)
• Flexible Shaft Head
• Drill Chuck
• Grinding Wheel Set
• Tapered Shaft
• Uhlíkové kartáče
• Chuck Keys
• Šestihranné klíče
• Gumový adaptér
• Hadice
• Mini Dust Bag
• Konektor
• Sada vodních ventilů
• Okapová roura
• Small Wrenches
• Cotton Polishing Wheel
• Fiber Polishing Wheel
• Ochranné brýle
• Šroubovák
• Flexibilní hřídel
• Spare Drive Belt

4. Pokyny k nastavení

Follow these steps to set up your Flyrivergo Pro Lapidary Saw.

1. Vybalte a zkontrolujte: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda během přepravy nedošlo k poškození.
2. Umístění pily: Place the main saw unit on a stable, level, and clean work surface.
3. Instalace krytu čepele: Secure the transparent blade guard over the saw blade using the provided screws. Ensure it is firmly attached for safety.
4. Attach Water Supply System: Connect the water hose to the dust cover. Attach the other end of the hose to a water source (e.g., faucet with 1/2" NPS threaded connector) or a submersible pump (not included). Ensure the adjustable flow valve beneath the worktable is accessible.
5. Set up Drainage: Connect the drainpipe to the saw's drainage outlet. Use the dual-ended rubber adapter to fit it into a sink outlet.
6. Install Desired Blade/Attachment:
   • For Saw Blades: Ensure the correct blade (diamond for rock, tungsten carbide for wood) is securely mounted.
   • For Flexible Shaft: Attach the flexible shaft to the designated port on the side of the saw. Securely fasten the flexible shaft head or drill chuck with the desired accessory (e.g., grinding wheel, polishing wheel).
7. Připojení napájení: Once all components are securely installed, connect the power cord to a 110V power outlet.

Figure 4.1: Adjusting the angle cutting fence during setup.

Figure 4.2: Water supply and drainage system connections.

5. Návod k obsluze

Před zahájením provozu se ujistěte, že rozumíte všem bezpečnostním opatřením a dodržujete je.

1. Zapnutí: Press the 'ON' button to start the machine. The speed knob should be at the minimum setting (zero RPM) before starting.
2. Upravit rychlost: Slowly turn the adjustable speed knob to achieve the desired RPM (up to 15,000 RPM). Start with lower speeds and gradually increase as needed for your material and task.
3. Activate Water Cooling (for Diamond Blade): If using the diamond blade for cutting rocks or gemstones, open the adjustable flow valve to ensure a steady stream of water cools the blade. Never operate the diamond blade dry.
4. Cutting with Diamond Blade (Rocks/Gemstones):
   • Position the rock or gemstone against the fence (if used) and slowly feed it into the rotating diamond blade with steady, light pressure.
   • Avoid forcing the material, as this can cause the motor to overload or damage the blade.
   • The maximum cutting depth is approximately 42mm.
5. Cutting with Tungsten Carbide Tipped Blade (Wood):
   • For wood, laminate, MDF, and other wood-based materials, use the tungsten carbide tipped blade.
   • Maintain steady and moderate pressure. Always wear goggles and a dust mask.
   • Be aware that this saw lacks anti-kickback protection; exercise caution.
6. Using the Flexible Shaft:
   • The flexible shaft allows for precise, detailed work or reaching hard-to-access areas.
   • Attach the desired accessory (e.g., drill bit, grinding stone, polishing head) to the flexible shaft head.
   • Use the speed control knob to adjust the rotation speed for the flexible shaft.
7. Ochrana proti přetížení: If you notice a sudden decrease in RPM or the motor struggling, it indicates overloading. Immediately reduce the feed speed or the pressure applied to the material.
8. Vypnout: Once finished, turn the speed knob to the minimum setting (zero RPM) and press the 'OFF' button. Disconnect the power cord.

Figure 5.1: Cutting a rock with the diamond saw blade.

Figure 5.2: Close-up of diamond blade in action, ideal for jade, marble, agate.

Figure 5.3: Tungsten carbide tipped blade cutting wood, suitable for wood-based materials.

Figure 5.4: Using the flexible shaft for detailed work.

6. Údržba

Regular maintenance ensures optimal performance and extends the lifespan of your lapidary saw.

• Čištění: After each use, especially when wet cutting, clean the saw thoroughly to prevent mineral buildup and corrosion. Disconnect power before cleaning.
• Vodní systém: Flush the water-cooling and drainage systems regularly to prevent clogs from debris.
• Kontrola čepele: Periodically inspect blades for wear, damage, or dullness. Replace worn blades to maintain cutting efficiency and safety.
• Ohebná hřídel: Keep the flexible shaft clean and free of kinks. Lubricate as per manufacturer recommendations if applicable.
• Generální inspekce: Check all screws and fasteners for tightness. Ensure all guards and safety features are in place and functioning correctly.

7. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat.

8. Specifikace

Obrázek 8.1: Parametry produktu.

9. Informace o záruce

This Flyrivergo Pro Lapidary Saw WYS-14-2 comes with a 1-letá záruka výrobce. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modifications, or normal wear and tear.

10. Zákaznická podpora

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Flyrivergo customer support. Refer to the product packaging or the official Flyrivergo webstránky s nejaktuálnějšími kontaktními informacemi.