Tehanld 110LBS

Tehanld Commercial Ice Maker Machine 110LBS User Manual

Model: 110 liber

1. Bezpečnostní pokyny

Please read all instructions carefully before operating the Tehanld Commercial Ice Maker Machine. Retain this manual for future reference.

  • Elektrická bezpečnost: Ensure the machine is connected to a properly grounded 115V/60Hz electrical outlet. Do not use extension cords. Disconnect power before cleaning or maintenance.
  • Vodovod: Connect only to a potable water supply. Ensure all water connections are secure to prevent leaks.
  • Umístění: Place the machine on a level, stable surface. Allow at least 6 inches of clearance around the unit for proper ventilation. Avoid direct sunlight, heat sources, or areas with high humidity.
  • Děti a domácí mazlíčci: Během provozu udržujte děti a domácí zvířata mimo dosah spotřebiče.
  • Čištění: Do not immerse the appliance in water or other liquids. Use only mild, non-abrasive cleaners.
  • Poškození: Nepoužívejte stroj, pokud je poškozený napájecí kabel nebo zástrčka, pokud stroj nefunguje správně nebo upadl. Požádejte o pomoc zákaznickou podporu.

2. Konec produktuview

The Tehanld Commercial Ice Maker Machine is designed for high-volume ice production, suitable for commercial establishments and large home use. It features efficient ice making, a large storage capacity, and convenient functions like self-cleaning.

Klíčové vlastnosti:

  • Vysoká kapacita: Produces up to 110 LBS of ice per 24 hours with a 33 LBS storage bin.
  • Výroba rychlého ledu: Generates 50 square ice cubes in approximately 7-15 minutes.
  • Nastavitelná tloušťka ledu: Offers 10 adjustable levels for ice thickness.
  • Funkce samočištění: Zjednodušuje údržbu a zajišťuje hygienu.
  • Integrated Water Filter: Provides cleaner ice.
  • Odolná konstrukce: Stainless steel exterior, thick PP plastic interior, and corrosion-resistant copper-nickel plated ice tray.
  • Uživatelsky přívětivé: Features a clear guide rail door, ice-full, and water-shortage připomínky.

Komponenty:

Familiarize yourself with the main components of your ice maker:

Tehanld Commercial Ice Maker Machine front view

Obrázek 2.1: Přední strana view of the Tehanld Commercial Ice Maker Machine. This image displays the stainless steel exterior, control panel, and the clear guide rail door for accessing the ice bin.

  • Ovládací panel: Located on the front, with buttons and indicator lights.
  • Zásobník na led: Storage area for produced ice.
  • Přívod vody: Připojovací bod pro přívod vody.
  • Vypouštěcí otvor: For water drainage.
  • Větrací otvory: Located on the sides or back for heat dissipation.

3. Pokyny k nastavení

3.1 Vybalení

  1. Opatrně vyjměte výrobník ledu z obalu.
  2. Remove all packing materials, tape, and protective film from the unit.
  3. Inspect the machine for any shipping damage. If damaged, do not operate and contact customer support.

3.2 Umístění

  • Výrobník ledu umístěte na pevný a rovný povrch, který unese jeho hmotnost, když je naplněn ledem a vodou.
  • Ensure there is at least 6 inches (15 cm) of space around the back and sides for proper air circulation.
  • Avoid placing the unit near heat sources (e.g., ovens, radiators) or in direct sunlight.
  • The ambient temperature should be between 10°C (50°F) and 35°C (95°F) for optimal performance.

3.3 Připojení vody

The ice maker requires a continuous water supply.

  1. Locate the water inlet connection at the back of the machine.
  2. Install the provided water filter according to its instructions.
  3. Connect the water supply line to the water inlet. Ensure all connections are tight to prevent leaks.
  4. Connect the drain hose to the drain outlet and route it to a suitable drain. Ensure the drain hose has a continuous downward slope.
  5. Otevřete ventil přívodu vody a zkontrolujte, zda nedochází k únikům.

3.4 Připojení napájení

  • Plug the power cord into a dedicated, grounded 115V/60Hz electrical outlet.
  • Nesdílejte zásuvku s jinými spotřebiči s vysokým výkonem.

3.5 Počáteční čištění

Before first use, it is recommended to perform an initial cleaning cycle.

  1. Ensure the water supply is connected and the machine is powered on.
  2. Refer to the 'Self-Cleaning Function' section in Operating Instructions to initiate a cleaning cycle.
  3. After the cleaning cycle, discard the first batch of ice produced.

4. Návod k obsluze

4.1 Ovládací panel

Ovládací panel obvykle obsahuje:

  • Tlačítko napájení: Zapíná/vypíná stroj.
  • ICE/CLEAN Button: Starts ice making or initiates the self-cleaning cycle.
  • Tlačítko TIMER: Sets the timed operation.
  • +/- tlačítka: Adjust ice thickness or timer settings.
  • Indikátory: Lights for 'Ice Full', 'Water Shortage', 'Ice Making', 'Cleaning'.

4.2 Výroba ledu

  1. Ensure the water supply is open and the machine is plugged in.
  2. Stiskněte tlačítko MOC tlačítko pro zapnutí stroje.
  3. The machine will automatically start the ice-making process. The 'Ice Making' indicator will illuminate.
  4. To adjust ice thickness, use the +/- buttons. There are 10 levels of adjustment. Thicker ice takes longer to produce.
  5. When the ice bin is full, the 'Ice Full' indicator will light up, and the machine will pause ice production. It will resume automatically once ice is removed.
  6. If the water supply is low, the 'Water Shortage' indicator will light up. The machine will pause until water supply is restored.

4.3 Funkce samočištění

Regular use of the self-cleaning function helps maintain hygiene and efficiency.

  1. Ujistěte se, že je nádoba na led prázdná.
  2. Stiskněte a podržte LED/ČISTÝ button for a few seconds to activate the self-cleaning cycle. The 'Cleaning' indicator will light up.
  3. The machine will automatically flush and clean its internal components. This cycle typically takes several minutes.
  4. Jakmile je cyklus dokončen, stroj se vrátí do pohotovostního režimu.

4.4 Funkce časovače

Use the timer function to schedule when the machine turns on or off.

  1. While the machine is on or in standby, press the ČASOVAČ tlačítko.
  2. Použijte +/- buttons to set the desired delay time (e.g., hours until turn on/off).
  3. Stiskněte tlačítko ČASOVAČ button again to confirm the setting. The timer indicator will illuminate.

5. Údržba

Pravidelná údržba zajišťuje optimální výkon a prodlužuje životnost vašeho výrobníku ledu.

5.1 Čištění exteriéru

  • Vnější povrch otřete měkkým hadříkem dampošetřete jemným čisticím prostředkem a vodou.
  • Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.

5.2 Interior Cleaning and Descaling

Perform a thorough interior cleaning and descaling every 1-3 months, depending on water hardness and usage.

  1. Turn off the machine and disconnect it from the power supply.
  2. Empty the ice bin and drain any remaining water.
  3. Prepare a cleaning solution (e.g., a mixture of water and white vinegar or a commercial ice maker cleaner).
  4. Pour the cleaning solution into the water reservoir.
  5. Initiate the self-cleaning cycle (refer to section 4.3). For manual cleaning, use a soft brush to clean the ice tray and water tank.
  6. After the cleaning cycle, drain the solution and rinse thoroughly with clean water. Run several cycles with clean water to ensure all cleaning solution residue is removed.

5.3 Výměna vodního filtru

The included water filter should be replaced every 3-6 months, or more frequently if water quality is poor or ice production decreases.

  1. Vypněte přívod vody do výrobníku ledu.
  2. Disconnect the old filter and dispose of it properly.
  3. Install the new water filter according to its specific instructions.
  4. Zapněte přívod vody a zkontrolujte těsnost.

6. Řešení problémů

ProblémMožná příčinaŘešení
Stroj se nezapneNo power; Power cord loose; Fuse blown/circuit breaker trippedCheck power outlet; Ensure cord is securely plugged in; Reset circuit breaker or replace fuse.
Žádná tvorba leduWater supply off; Water shortage; 'Ice Full' sensor activated; Ambient temperature too highCheck water supply valve; Refill water reservoir (if applicable) or check water line; Empty ice bin; Ensure proper ventilation and lower room temperature.
Ice is too thin or softWater temperature too high; Ambient temperature too high; Ice thickness setting too lowEnsure cold water supply; Improve ventilation; Adjust ice thickness setting to a higher level.
Únik vodyLoose water connections; Clogged drain hoseTighten all water inlet and drain connections; Clear any blockages in the drain hose.
Neobvyklý hlukStroj není v rovině; Problém s vnitřními součástkamiEnsure machine is on a level surface; If noise persists, contact customer support.

7. Specifikace

  • Značka: Tehanld
  • Model: 110 LBS
  • Kapacita výroby ledu: Up to 110 LBS per 24 hours
  • Kapacita ledu: 33 LBS
  • Ice Cube Production Cycle: Approximately 7-15 minutes for 50 cubes
  • Napájení: AC 115V / 60Hz
  • Rozsah provozních teplot: 10 °C - 35 °C (50 °F - 95 °F)
  • Materiál: Stainless Steel (exterior), PP Plastic (interior), Copper-Nickel Plated (ice tray)
  • Vlastnosti: Self-cleaning, Water Filter, Adjustable Ice Thickness

8. Záruka a podpora

Your Tehanld Commercial Ice Maker Machine comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Tehanld Customer Support:

  • Webmísto: Visit the Tehanld Store on Amazon
  • E-mail: support@tehanld.com (Example email, actual email may vary)
  • Telefon: 1-800-XXX-XXXX (Example phone, actual number may vary)

When contacting support, please have your model number (110LBS) and purchase date available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.