XURUYI ZYX012 3D Metal Dragon Model DIY Assembly Kit

1. Úvod

Thank you for choosing the XURUYI ZYX012 3D Metal Dragon Model DIY Assembly Kit. This kit provides a challenging and rewarding experience for enthusiasts of mechanical models and steampunk aesthetics. Inspired by the mythical dragon, this intricate sculpture is crafted from over 2030 precision-cut metal parts, offering a high-level assembly challenge and resulting in a unique collectible ornament.

This manual will guide you through the assembly process, provide important safety information, and offer tips for maintaining your finished model. Please read all instructions carefully before beginning assembly.

Image 1.1: The fully assembled XURUYI ZYX012 3D Metal Dragon Model, showcasing its intricate design and metallic finish.

2. Bezpečnostní informace

Please observe the following safety precautions during assembly:

• Doporučený věk: This kit is recommended for individuals aged 16 and above due to the complexity and small parts involved.
• Nebezpečí malých dílů: The kit contains many small parts. Keep them out of reach of young children to prevent choking hazards.
• Ostré hrany: Some metal parts may have sharp edges. Handle all components with care to avoid cuts or injuries.
• Use Tools Safely: The kit includes an assembled tool kit. Use these tools as instructed and with caution. Always ensure a stable grip on parts and tools.
• Větrání: Pracujte v dobře větraném prostoru.
• Ochrana očí: Consider wearing eye protection during assembly to guard against small flying debris.
• Čistý pracovní prostor: Maintain a clean and organized workspace to prevent losing small components.

3. Obsah balení

Before starting assembly, please verify that all components are present in your kit:

• Assembled Tools Kit (1 set)
• Metal Parts Kit (1 set, containing over 2030 individual pieces)
• Návod k obsluze (1 kopie)

If any parts are missing or damaged, please contact XURUYI customer support for assistance.

4. Montážní návod

The assembly of the ZYX012 3D Metal Dragon Model is an immersive process designed to take approximately 20 hours. Patience and attention to detail are key. Follow the detailed step-by-step instructions provided in the included manual carefully.

4.1. Příprava

1. Rozbalte komponenty: Carefully unpack all parts from the Metal Parts Kit. Organize them by type or size as suggested in your detailed assembly manual.
2. Review Instrukce: Thoroughly read through the entire assembly manual before starting. Familiarize yourself with the diagrams and part identification.
3. Připravte si nástroje: Ensure all tools from the Assembled Tools Kit are accessible and in good condition.

4.2. Core Body Assembly

Begin by constructing the central body frame of the dragon. This typically involves connecting larger structural pieces that form the torso and spine. Pay close attention to the orientation of each part.

Image 4.1: Design concept illustration, showing the intricate mechanical details and steampunk elements of the dragon model.

4.3. Limb and Head Assembly

Proceed to assemble the four limbs (legs) and the head section. These often involve smaller, more intricate mechanisms. Ensure all joints are correctly aligned and secured according to the diagrams.

Obrázek 4.2: Podrobný view of the dragon's head, highlighting the complex gears, pipes, and metallic horns.

4.4. Tail and Wing (if applicable) Assembly

Assemble the tail section, which may include flexible segments or decorative elements. If your model includes wings, follow the specific instructions for their construction and attachment.

Obrázek 4.3: Boční profesionálfile of the dragon model, revealing the layered metal plates and internal mechanical components.

4.5. Dokončovací úpravy

Once the main structure is complete, attach any remaining decorative elements, small pipes, wires, or other details that bring the steampunk aesthetic to life. Double-check all connections for stability.

Image 4.4: The dragon model with a clear, spherical element in its mouth, adding to its mystical and mechanical presence.

5. Operating (Display and Handling)

This 3D metal model is designed as a static display piece. While some joints may be articulated for posing, it is not intended for active play or rough handling.

• Zobrazit: Place your assembled dragon on a stable, flat surface away from direct sunlight, excessive heat, or moisture.
• Zacházení: When moving the model, always lift it from its base or main body to avoid stressing delicate parts. Avoid dropping or applying excessive force.
• Pózování: If parts are designed to be articulated, move them gently and within their intended range of motion to prevent damage.

6. Údržba

To ensure your XURUYI ZYX012 model remains in pristine condition:

• Čištění: Dust the model regularly with a soft, dry brush or a microfiber cloth. For more stubborn dirt, a slightly damp cloth can be used, but ensure the model is thoroughly dried immediately afterward to prevent water spots or corrosion.
• Vyhněte se chemikáliím: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the metal finish.
• Inspekce: Periodically inspect the model for any loose parts. If found, gently tighten them using the appropriate tools.

7. Řešení problémů

Zde jsou řešení běžných problémů, se kterými se můžete setkat během montáže:

8. Specifikace

• Značka: XURUYI
• Model: ZYX012 (Ty4)
• Číslo dílu výrobce: 1121P2742CU
• Typ materiálu: Hliníková slitina, Nerezová ocel
• Počet kusů: 2030+
• Přibližná doba montáže: 20 hodiny
• Hmotnost produktu: 2100 g
• Rozměry produktu (smontovaný): 50 x 10 x 18 cm (19.5"L x 3.9"W x 7.1"H approx.)
• Doporučený věk: 16+ let

9. Zákaznická podpora

For any questions, missing parts, or technical assistance, please contact XURUYI customer support through the retailer where you purchased the product or visit the official XURUYI webstránky pro kontaktní informace.

Please have your model number (ZYX012) and purchase details ready when contacting support.