RECOIL RLS8 8" Ultra-Thin Powered Under Seat Car Subwoofer

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your RECOIL RLS8 8" Ultra-Thin Powered Under Seat Car Subwoofer. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage to the unit or your vehicle.

Bezpečnostní informace

• Před zahájením jakýchkoli elektrických prací vždy odpojte záporný pól baterie vozidla.
• Ensure all wiring is properly routed and secured to prevent pinching, cutting, or short-circuiting.
• Pro připojení napájení a uzemnění použijte kabeláž vhodného průřezu, jak je uvedeno v části o instalaci.
• Avoid installing the subwoofer in locations where it may be exposed to moisture or excessive heat.
• Pokud si nejste jisti některou částí instalace, vyhledejte pomoc kvalifikovaného profesionálního instalatéra autorádií.
• Do not operate the subwoofer at excessively high volumes for prolonged periods, as this may cause hearing damage.

Konec produktuview a funkce

The RECOIL RLS8 is an 8-inch ultra-thin powered subwoofer designed to deliver enhanced bass performance in vehicles with limited space. It features a built-in Class D amplifier and includes a wired remote control for convenient bass level adjustments.

Klíčové vlastnosti:

• Kompaktní design: Ultra-thin 2.3-inch profile for discreet installation under seats.
• Integrovaný Ampživější: Built-in 150W RMS Class-D amplifier eliminates the need for an external ampživější.
• Flexibilní vstupy: Supports both RCA and speaker-level inputs for compatibility with various head units.
• Dálkové ovládání basů: Wired remote knob allows for on-the-fly bass level adjustments.
• Nastavitelné ovládání zvuku: Features variable low-pass filter (50-150Hz), bass boost (+18dB), and phase switch (0/180 degrees).
• Automatické zapnutí: Automatically activates and deactivates with the audio signal.
• Ochranný obvod: Equipped with thermal, overload, and short-circuit protection for reliable operation.

Image: The RECOIL RLS8 8-inch powered subwoofer, showcasinjeho kompaktní design a integrované komponenty.

Image: The RECOIL RLS8 subwoofer discreetly installed under a car seat, demonstrating its space-saving design.

Image: The RECOIL RLS8 subwoofer positioned in a car trunk, highlighting its versatility for various vehicle types.

Průvodce instalací

Správná instalace je klíčová pro optimální výkon a bezpečnost. Pečlivě dodržujte tyto kroky.

Co je zahrnuto:

Image: Contents of the RECOIL RLS8 accessory pack, including mounting brackets, Velcro strips, high-level input wiring harness, and remote knob.

Instalace krok za krokem:

1. Odpojit baterii: Před nastartováním odpojte záporný pól baterie vozidla, abyste předešli elektrickému zkratu.
2. Vyberte místo montáže: Select a secure, dry location, typically under a seat or in the trunk. Ensure adequate ventilation around the unit. Use the included mounting brackets and screws for a firm installation.
3. Napájení:
   • +12V (Napájení): Connect a suitable gauge power wire (e.g., 8-gauge) directly from the vehicle's positive battery terminal to the +12V terminal on the subwoofer. Install an in-line fuse (not included, recommended 20A) within 18 inches of the battery.
   • GND (zem): Connect a short (less than 3 feet) and equally thick ground wire from the GND terminal on the subwoofer to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection.
   • REM (Dálkové zapnutí): Connect a remote turn-on wire from your head unit's remote output (typically blue/white wire) to the REM terminal on the subwoofer. This wire signals the subwoofer to turn on/off with your head unit. If your head unit lacks a remote output, the RLS8 features an auto turn-on function via high-level inputs.
4. Připojení zvukového vstupu:
   • RCA vstup: If your head unit has RCA pre-outs, connect RCA cables from the head unit to the RCA INPUTs (L and R) on the subwoofer.
   • Vstup na vysoké úrovni: If your head unit does not have RCA pre-outs, use the included high-level input harness. Connect the speaker wires from your head unit (or factory speaker wires) to the corresponding wires on the high-level input harness. Plug the harness into the HIGH INPUT port on the subwoofer.
5. Dálkový ovladač basů: Connect the wired remote bass knob to the 'REMOTE' port on the subwoofer. Route the cable to a convenient location for the driver.
6. Znovu připojte baterii: Once all connections are secure and verified, reconnect the negative battery terminal.

Wiring Diagram and Controls:

Obrázek: Podrobný view of the RECOIL RLS8's control panel, showing power/ground terminals, fuse, RCA inputs, high-level inputs, remote control port, and audio adjustment knobs (Phase, Low Pass, Bass Boost, Input Gain).

Referenční video k instalaci:

Návod k obsluze

Adjust the subwoofer settings to achieve optimal bass response for your vehicle and listening preferences.

Nastavení ovládacího panelu:

• Vstupní zisk: This control matches the output level of your head unit to the subwoofer. Start with the gain at minimum, then slowly increase it until you hear distortion, then back off slightly.
• Nízkopropustný filtr (LPF): This filter allows only frequencies below the set point to pass through to the subwoofer. Adjust between 50Hz and 150Hz. A common starting point is 80-100Hz. Experiment to blend the subwoofer's output seamlessly with your main speakers.
• Zesílení basů: This control provides an increase in bass output at a specific frequency. Use sparingly to avoid distortion. The RLS8 offers up to +18dB of bass boost.
• Fázový přepínač (0°/180°): This switch helps to correct phase alignment issues between the subwoofer and your main speakers. Listen to music with strong bass and switch between 0° and 180° to determine which setting provides the most impactful and cohesive bass.
• Dálkový ovladač basů: This knob provides convenient control over the subwoofer's output level from the driver's seat. It adjusts the overall bass volume without affecting other settings.

Specifikace

Detailed technical specifications for the RECOIL RLS8 subwoofer.

Image: Diagram illustrating the physical dimensions of the RECOIL RLS8 subwoofer, including length, width, and height.

Odstraňování problémů

If you encounter issues with your RECOIL RLS8 subwoofer, refer to the following common problems and solutions:

• Bez napájení:
  • Check the in-line fuse on the +12V power wire. Replace if blown.
  • Verify all power, ground, and remote turn-on connections are secure and properly connected.
  • Ujistěte se, že je baterie vozidla dostatečně nabitá.
• Žádný zvuk:
  • Confirm the head unit is on and playing audio.
  • Zkontrolujte správné usazení a vodivost RCA nebo vysokoúrovňových vstupních připojení.
  • Adjust the 'Input Gain' control on the subwoofer.
  • Ensure the head unit's subwoofer output (if applicable) is enabled and volume is up.
• Zkreslený zvuk:
  • Reduce the 'Input Gain' setting.
  • Lower the 'Bass Boost' setting.
  • Check for loose speaker wires or damaged audio cables.
  • Ensure the subwoofer is not overdriven by the head unit.
• Subwoofer Overheats:
  • Ensure adequate ventilation around the subwoofer. Do not block cooling fins.
  • Reduce the 'Input Gain' and 'Bass Boost' settings.
  • Verify the impedance of the connected speakers (if applicable) matches the subwoofer's requirements.

Údržba

To ensure the longevity and optimal performance of your RECOIL RLS8 subwoofer, follow these simple maintenance guidelines:

• Čištění: Use a soft, dry cloth to wipe down the exterior of the subwoofer. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
• Větrání: Periodically check that the cooling fins and surrounding area are free from dust, debris, or obstructions that could impede airflow. Proper ventilation prevents overheating.
• Kontroly připojení: Annually, or if you notice any performance issues, inspect all wiring connections (power, ground, remote, and audio inputs) to ensure they are secure and free from corrosion.
• Ochrana životního prostředí: While designed for vehicle use, avoid prolonged exposure to extreme temperatures or direct moisture.

Záruka a podpora

For warranty information, technical support, or service inquiries, please contact RECOIL directly. Refer to your purchase documentation or the official RECOIL webNejnovější záruční podmínky a kontaktní údaje naleznete na webových stránkách.

Kontaktní údaje výrobce:
ODZPĚT
3757 E Broadway Rd Suite 3
Phoenix, Arizona 85040, USA

You can also visit the official RECOIL store on Amazon for additional product information and support resources: RECOIL Store