ANCEL DS500 Elite, BT310

ANCEL DS500 Elite OBD2 Scanner and BT310 Battery Tester User Manual

Komplexní průvodce provozem a údržbou

1. Úvod

This manual provides detailed instructions for the ANCEL DS500 Elite Bidirectional Scan Tool and the ANCEL BT310 12V/24V Car Battery Tester. Please read this manual thoroughly before operating the devices to ensure correct usage and optimal performance. Keep this manual for future reference.

2. Konec produktuview

2.1 ANCEL DS500 Elite Bidirectional Scan Tool

The ANCEL DS500 Elite is an advanced diagnostic scan tool designed for comprehensive vehicle system analysis. It features bidirectional control capabilities, allowing users to send commands to vehicle modules and monitor system responses. This tool supports full-system deep scans and offers over 3,000 active test commands.

  • Obousměrné ovládání: Perform active tests on various components like fuel pumps, cooling fans, windows, and mirrors.
  • Full System Deep Scan: Uncover critical data from every module and sensor, including Engine, ABS, Airbag, Transmission, TPMS, SAS, ESP, BCM, HVAC, EBS, and ACM.
  • Hot Reset Service: Access over 28 maintenance reset functions for various car brands, including D-P-F Regeneration, AdBlue Reset, Oil Life Reset, EGR Adaptation, IMMO Reset, Gear Learning, Battery Matching, SAS Calibration, A/F Ratio/Fuel Reset, ABS Bleeding, Air Suspension Reset, NOx Sensor Reset, AFS Reset, ETA Reset, Coolant Pump Activation, Brake-pad Reset, Seat Calibration, and Airbag Reset.
  • Doživotní bezplatné aktualizace: Ensures compatibility with evolving vehicle diagnostic systems without subscription fees.
ANCEL DS500 Elite performing bidirectional control tests on various car components.
Image: ANCEL DS500 Elite demonstrating bidirectional control functions, including fuel injector test, window control, rearview mirror control, and light control. The device shows an 'OK Activated' status for a command and an 'ERROR No Response' for another, illustrating its diagnostic capabilities.
ANCEL DS500 Elite displaying various hot reset service functions.
Image: The ANCEL DS500 Elite interface showcasing over 28 hot reset service functions, such as D-P-F Regeneration, AdBlue Reset, Oil Life Reset, EGR Adaptation, IMMO Reset, Gear Learning, Battery Matching, and SAS Calibration, indicating its comprehensive maintenance capabilities.
ANCEL DS500 Elite performing a full system deep scan.
Image: A visual representation of the ANCEL DS500 Elite performing a full system deep scan, highlighting its ability to access critical data from various modules and sensors like I.M.M.O.bilizer, SAS, ESP, BCM, HVAC, EBS, and ACM, along with functions like Read Codes, Erase Code, View Freeze Frame, Live Data, I/M Readiness, and Evap Leak Test.

2.2 ANCEL BT310 12V/24V Car Battery Tester

The ANCEL BT310 is a versatile battery load tester compatible with both 12V and 24V battery systems. It supports various battery types and provides accurate health assessments, cranking tests, and charging tests.

  • Univerzální kompatibilita: Supports 12V and 24V Lithium and Lead-Acid batteries, including Flooded, AGM (Spiral & Flat Plate), GEL, and EFB types.
  • Multiple Standards: Compatible with major battery standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
  • Key Diagnostics: Measures State of Charge (SOC), State of Health (SOH), Voltage Test, Rated and Measured CCA, and Internal Resistance.
  • Výsledky testu: Provides clear results: [GOOD BATTERY], [GOOD-RECHARGE], [CHARGE & RETEST], [REPLACE BATTERY], and [BAD CELL-REPLACE].
ANCEL BT310 battery tester showing compatibility with various battery types and vehicles.
Image: The ANCEL BT310 battery tester highlighting its compatibility with different battery types (Flooded, AGM, EFB, GEL, Lithium-Ion) and various vehicles such as ATVs, boats, cars, SUVs, pickups, and motorcycles, emphasizing its broad application.

3. Nastavení

3.1 ANCEL DS500 Elite Setup

  1. Zapnutí: Connect the DS500 Elite to the vehicle's OBD-II port. The device will power on automatically.
  2. Počáteční konfigurace: Follow the on-screen prompts to select language, time zone, and Wi-Fi connection.
  3. Aktualizace softwaru: Ensure the device is connected to Wi-Fi and check for available software updates to maintain optimal performance and vehicle compatibility.

3.2 ANCEL BT310 Setup

  1. Připojení k baterii: Ensure the vehicle engine is off. Connect the red clamp ke kladnému (+) pólu baterie a černé třamp na záporný (-) terminál.
  2. Zapnutí: BT310 se po připojení k baterii automaticky zapne.
  3. Vyberte typ baterie: Use the navigation buttons to select the correct battery type (e.g., Flooded, AGM, GEL, EFB, Lithium) and standard (e.g., CCA, BCI) as prompted on the screen.
ANCEL BT310 battery tester connected to a car battery for testing.
Image: The ANCEL BT310 battery tester connected to a car battery, illustrating the proper setup for testing. The image also highlights the device's 12V and 24V compatibility and its 100-2000 CCA testing range.

4. Návod k obsluze

4.1 ANCEL DS500 Elite Operation

  1. Připojení vozidla: Plug the OBD-II cable into the vehicle's diagnostic port, usually located under the dashboard.
  2. Identifikace vozidla: The DS500 Elite will automatically detect the vehicle's VIN or prompt you to manually enter vehicle information (make, model, year).
  3. Diagnostické menu: Navigate the main menu to select desired functions:
    • Diagnostikovat: Perform full system scans, read/clear fault codes, view live data streams, and check I/M readiness.
    • Aktivní test: Select specific control modules and components to perform bidirectional tests (e.g., activate ABS pump, cycle cooling fan).
    • Servis: Access various reset and maintenance functions (e.g., Oil Reset, EPB Reset, SAS Calibration).
    • Aktualizovat: Zkontrolujte a nainstalujte aktualizace softwaru.
  4. Data Review: After performing tests, review the diagnostic reports, freeze frame data, and live data graphs on the device screen.

4.2 ANCEL BT310 Operation

  1. Hlavní menu: Once powered on, the BT310 will display the main menu with options like 'Battery Test', 'Cranking Test', 'Charging Test', and 'Review Data'.
  2. Test baterie: Select 'Battery Test'. The device will prompt you to enter the battery's rated CCA (Cold Cranking Amps) or other standard values. Follow the on-screen instructions. The test will provide results such as SOC, SOH, Voltage, Measured CCA, and Internal Resistance, along with a clear status (e.g., GOOD BATTERY, REPLACE BATTERY).
  3. Test natáčení: Select 'Cranking Test'. The device will instruct you to start the vehicle. It will then measure the cranking voltage a čas, což poskytuje posouzení výkonu startovacího systému.
  4. Test nabíjení: Select 'Charging Test'. The device will instruct you to run the engine at idle and then at a higher RPM (e.g., 2500 RPM). It will measure the alternator's output voltage and ripple, assessing the charging system's efficiency.
  5. Review Data: Vyberte možnost „Znovu“view Data' to view dříve uložené výsledky testů.
ANCEL BT310 displaying battery health results.
Image: The ANCEL BT310 battery tester screen showing detailed battery health metrics including Health, Charge, Voltage, Internal Resistance, and a 'GOOD BATTERY' status. It also illustrates the five possible battery health results: Good Battery, Good-Recharge, Charge & Retest, Replace Battery, and Bad Cell-Replace.
ANCEL BT310 performing cranking and charging tests.
Image: The ANCEL BT310 battery tester displaying results for both Cranking Test (Time, Voltage) and Charging Test (Unloaded, Loaded, Ripple), indicating 'CRANKING NORMAL' and 'VOLTAGE NORMAL' statuses, demonstrating its ability to assess the vehicle's starting and charging systems.

5. Údržba

  • Čištění: Use a soft, dry cloth to clean the device screens and bodies. Avoid using abrasive cleaners or solvents.
  • Skladování: Store both devices in a dry, cool environment, away from direct sunlight and extreme temperatures.
  • Péče o kabely: Inspect cables regularly for any signs of damage. Do not pull on the cables to disconnect them; always grasp the connector.
  • Software Updates (DS500 Elite): Regularly check for and install software updates to ensure the scanner has the latest vehicle data and diagnostic capabilities.

6. Řešení problémů

  • Zařízení se nezapíná:
    • DS500 Elite: Ensure the OBD-II cable is securely connected to the vehicle's diagnostic port. Check the vehicle's battery for sufficient charge.
    • BT310: Ověřte, že třamps are correctly connected to the battery terminals (red to positive, black to negative) and that the battery has sufficient voltage.
  • Communication Error (DS500 Elite):
    • Zkontrolujte, zda je zapnuté zapalování vozidla.
    • Ensure the OBD-II connector is fully seated.
    • Verify that the vehicle supports the OBD-II protocol.
    • Try testing on a different compatible vehicle to rule out a vehicle-specific issue.
  • Inaccurate Battery Test Results (BT310):
    • Zajistěte, aby baterie třamps are clean and have good contact with the battery terminals.
    • Verify that the correct battery type and CCA rating were entered into the tester.
    • Ensure the battery is fully charged before testing for the most accurate results.
  • Screen Freezes or Device Unresponsive:
    • Perform a soft reset by holding the power button (if available) or disconnecting and reconnecting the device.
    • If the issue persists, contact ANCEL support.

7. Specifikace

7.1 ANCEL DS500 Elite Bidirectional Scan Tool

  • Procesor: 2.0GHz Cortex-A53 Quad-Core
  • Operační systém: Android 10.0
  • Paměť: 2GB RAM, 32GB ROM
  • Zobrazit: 7-inch screen, 1024x600 resolution
  • Baterie: 3150mAh, 3.8V
  • Konektivita: Wi-Fi for updates and online support
  • Diagnostické funkce: Full system diagnostics, bidirectional control, 28+ reset services.
ANCEL DS500 Elite hardware specifications including processor, OS, memory, screen, and battery.
Image: Detailed hardware specifications of the ANCEL DS500 Elite, including its 2.0GHz Cortex-A53 Quad-Core processor, Android 10.0 operating system, 2GB RAM, 32GB ROM, 7-inch 1024x600 resolution display, and 3150mAh 3.8V battery, highlighting its robust internal components.

7.2 ANCEL BT310 12V/24V Car Battery Tester

  • svtage Rozsah: 12V a 24V
  • Rozsah CCA: 100-2000 CCA
  • Podporované typy baterií: Flooded, AGM (Spiral & Flat Plate), GEL, EFB, Lithium.
  • Podporované standardy: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
  • Tests Performed: Battery Health (SOC, SOH, Voltage, Internal Resistance, Rated/Measured CCA), Cranking Test, Charging Test.

8. Záruka a podpora

The ANCEL DS500 Elite comes with lifetime free software updates, ensuring your tool remains compatible with evolving vehicle diagnostic systems without additional subscription fees. For technical assistance or support, you can easily contact the professional engineering team through the online chat window available on the DS500 Elite device. Feedback can also be provided via the feedback section on the device to help improve services.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.