Dioche 3.5-inch Digital Door Peephole Viewer Uživatelská příručka

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Dioche 3.5-inch Digital Door Peephole Viewer. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Konec produktuview

2.1 Komponenty

• Indoor Unit (LCD display)
• Outdoor Unit (Peephole Camera)
• Montážní konzola
• Šroubovák

2.2 Specifikace

3. Bezpečnostní informace

• Při vkládání baterií dbejte na správnou polaritu baterií.
• Nevystavujte zařízení extrémním teplotám nebo vlhkosti.
• Uchovávejte mimo dosah dětí.
• Nepokoušejte se jednotku rozebírat ani opravovat sami. Pro servis se obraťte na kvalifikovaný personál.

4. Nastavení a instalace

Before installation, ensure your door's thickness and peephole diameter are within the specified ranges (Door Hole: 14-28mm, Door Thickness: 40-100mm).

4.1 Obsah balení

Ověřte, zda jsou přítomny všechny komponenty:

• 1 x Outdoor Unit (Peephole Camera)
• 1 x Indoor Unit (LCD Display)
• 1 x montážní držák
• 1 x pytel šroubů

Image: Complete kit showing the indoor display unit, outdoor camera, and mounting hardware.

4.2 kroky instalace

1. Odstraňte stávající kukátko: If an existing peephole is present, unscrew and remove it from the door. If not, drill a hole of appropriate diameter (14-28mm) at the desired height.
2. Instalace venkovní jednotky: Insert the outdoor unit (camera) through the door hole from the outside. Ensure the camera is facing outwards and the cable is threaded through to the inside of the door.


Image: The outdoor camera unit with its flexible connection cable.

3. Připevněte montážní držák: From the inside of the door, slide the mounting bracket over the outdoor unit's cable and align it with the outdoor unit. Secure the bracket using the appropriate screws from the screw bag, ensuring it is tight against the door.

Image: The indoor display unit with its battery compartment open, showing the mounting plate and screw holes.
4. Connect Indoor Unit: Connect the cable from the outdoor unit to the corresponding port on the back of the indoor display unit.
5. Vložte baterie: Open the battery compartment on the back of the indoor unit and insert 4 AAA batteries (not included), observing correct polarity.
6. Montáž vnitřní jednotky: Align the indoor unit with the mounting bracket and slide it downwards until it clicks securely into place.


Image: The indoor display unit (screen off) and the outdoor camera unit, along with the various screws for installation.

5. Návod k obsluze

5.1 Zapnutí/vypnutí

The device typically powers on automatically when the button on the indoor unit is pressed. It will power off after a short period of inactivity to conserve battery life.

5.2 Viewnávštěvníci

Press the button on the indoor unit to activate the screen and view who is at your door. The 3.5-inch LCD will display a clear image from the 120-degree wide-angle camera.

Image: The indoor display unit showing a live feed from the outdoor camera, with the outdoor unit visible.

6. Údržba

• Čištění: Wipe the screen and camera lens with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Výměna baterie: When the low power alert is displayed, replace all 4 AAA batteries promptly.
• Podmínky prostředí: Avoid exposing the device to direct sunlight for extended periods or extreme weather conditions.

7. Řešení problémů

8. Záruka a podpora

This Dioche product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact Dioche customer support.

For technical support or inquiries, please visit the official Dioche webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.