JONR X1 Max Robot Vacuum and Mop Cleaner User Manual

1. Úvod

The JONR X1 Max is an advanced robot vacuum and mop cleaner designed to provide comprehensive floor cleaning. It features powerful suction, intelligent navigation, and an all-in-one self-cleaning station for a hands-free cleaning experience. This manual will guide you through the setup, operation, and maintenance of your device.

Klíčové vlastnosti:

• Sací výkon 20000 XNUMX Pa: Effectively removes hair, dust, and debris from various floor types.
• TroboWave DuoBrush System: Anti-tangle design to minimize hair entanglement and maintenance.
• Lezení přes překážky 30 mm: Easily navigates over thresholds and carpets.
• 3D LiDAR Navigation with RGB Technology: Precise room mapping and intelligent obstacle avoidance.
• Stanice vše v jednom: Automatic dust collection, hot water mop washing (75°C), and hot air mop drying (45°C).
• Inteligentní ovládání: App control and voice command compatibility (Alexa, Google Home).
• Dlouhá výdrž baterie: Up to 150 minutes of cleaning, covering over 200 m².

Image: The JONR X1 Max robot vacuum demonstrating its powerful 20000 Pa suction, effectively lifting dust and pet hair from various surfaces.

2. Nastavení

2.1 Vybalení a kontrola součástí

Opatrně vyjměte všechny součásti z obalu. Ujistěte se, že jsou přítomny všechny níže uvedené položky.

• Robotický vysavač a mop JONR X1 Max
• All-in-One Docking Station
• Napájecí adaptér
• Mop Pads (pre-installed or separate)
• Návod k použití (tento dokument)
• Dust Bag (pre-installed in station or separate)
• Clean Water Tank (4.2 L)
• Dirty Water Tank (3.8 L)

2.2 Umístění dokovací stanice

Place the docking station on a hard, level surface against a wall. Ensure there is at least 0.5 meters of clear space on both sides and 1.5 meters in front of the station for the robot to navigate freely. Connect the power adapter to the station and plug it into a wall outlet.

Image: The JONR X1 Max robot vacuum and its all-in-one docking station. The station is designed for automatic dust collection, mop washing, and drying.

2.3 Počáteční nabíjení

Place the robot onto the docking station. Ensure the charging contacts on the robot align with those on the station. The robot will automatically begin charging. For first-time use, fully charge the robot before operation (approximately 2.5 hours).

2.4 Instalace a párování aplikace

1. Download the "JONR" app from your smartphone's app store (iOS or Android).
2. Otevřete aplikaci a vytvořte si účet nebo se přihlaste.
3. Follow the in-app instructions to add your JONR X1 Max device. This typically involves connecting to the robot's Wi-Fi hotspot temporarily and then connecting the robot to your home Wi-Fi network.
4. Once paired, you can control the robot, set cleaning schedules, and view mapy z aplikace.

3. Návod k obsluze

3.1 Spuštění čisticího cyklu

Čisticí cyklus můžete spustit jednou z následujících metod:

• Tlačítko robota: Jedním stisknutím tlačítka napájení na robotu spusťte běžný úklidový cyklus.
• JONR App: Open the app, select your device, and tap "Start Cleaning." You can choose specific cleaning modes (Vacuum, Mop, Vacuum & Mop) and areas.
• Hlasové ovládání: If integrated with Amazon Alexa or Google Home, use commands like "Alexa, start JONR robot" or "Hey Google, tell JONR to clean."

Image: The JONR X1 Max robot vacuum navigating a room, demonstrating its AI-powered obstacle avoidance system to detect and bypass objects like slippers.

3.2 Režimy čištění

• Režim vakua: The robot will only vacuum, suitable for carpets or dry debris.
• Režim mopu: The robot will only mop, suitable for hard floors. Ensure water tanks are filled.
• Režim vysávání a mopu: The robot will vacuum and mop simultaneously. This is the default and recommended mode for most hard floors.
• Čištění zón: Use the app to define specific areas for the robot to clean.
• Bodové čištění: Direct the robot to a specific spot for intensive cleaning.

Image: The JONR X1 Max robot vacuum demonstrating its edge-to-edge cleaning capability, with extendable mop pads ensuring thorough coverage near walls and furniture.

3.3 Navigace přes překážky

The JONR X1 Max is equipped with a lifting roller design, allowing it to overcome obstacles up to 30 mm, such as door thresholds and thick carpets. Its 3D LiDAR navigation and RGB technology enable precise mapping and real-time obstacle avoidance.

Image: The JONR X1 Max robot vacuum demonstrating its ability to climb over obstacles up to 30mm high, such as floor transitions or rugs, compared to a standard robot's 8mm capability.

3.4 All-in-One Station Functions

The docking station provides automated maintenance for the robot:

• Automatické vyprazdňování prachu: After each cleaning cycle, the robot's dustbin is automatically emptied into a 3L dust bag within the station.
• Mytí mopem horkou vodou: The mop pads are washed with 75°C hot water to remove dirt and grime effectively.
• Hot Air Mop Drying: Po umytí se mopové podložky suší horkým vzduchem o teplotě 45 °C, aby se zabránilo vzniku plísní a zápachu.
• Automatic Water Refill/Drain: The station manages the clean and dirty water tanks, refilling the robot's water tank and draining dirty water as needed.

Image: The JONR X1 Max docking station actively cleaning the robot's mop pads with 75°C hot water, ensuring thorough sanitation and removal of stubborn stains.

4. Údržba

Regular maintenance ensures the optimal performance and longevity of your JONR X1 Max.

4.1 Dust Bag Replacement (Docking Station)

• The 3L dust bag in the docking station typically lasts up to 2.5 months, depending on usage.
• When the app indicates the dust bag is full, open the station's top cover, remove the full bag, and replace it with a new one.

4.2 Water Tank Maintenance (Docking Station)

• Nádrž na čistou vodu (4.2 l): Refill with clean tap water as needed. Do not add detergents or cleaning solutions unless specifically designed for robot vacuums and approved by JONR.
• Nádrž na špinavou vodu (3.8 l): Empty the dirty water tank regularly to prevent odors and ensure proper mop washing. Clean the tank with water if necessary.

4.3 Čištění a výměna mopové podložky

• The docking station automatically washes and dries the mop pads.
• Periodically inspect the mop pads for wear and tear. Replace them when they become excessively worn or no longer clean effectively.

4.4 Čištění hlavního kartáče a bočního kartáče

• Hlavní kartáč: The TroboWave DuoBrush system is designed to reduce hair entanglement. However, periodically remove the main brush and clean any accumulated hair or debris using the cleaning tool provided.
• Boční kartáče: Check side brushes for tangled hair or damage. Remove and clean them. Replace if bristles are bent or broken.

Obrázek: Detailní záběr view of the JONR X1 Max's patented helical blade design, illustrating its anti-tangle technology that significantly reduces hair obstructions and minimizes maintenance requirements.

4.5 Čištění filtru

• The robot uses a sponge filter. Remove the filter from the dustbin (after automatic emptying) and tap it gently to remove dust. Do not wash the filter with water unless specified.
• Vyměňujte filtr každé 3–6 měsíců, v závislosti na používání.

4.6 Čištění snímače

• Wipe the cliff sensors, wall sensors, and charging contacts on the robot and docking station with a clean, dry cloth periodically to ensure proper navigation and charging.

5. Řešení problémů

6. Specifikace

7. Záruka a podpora

JONR provides 365-day customer service for the X1 Max robot vacuum and mop cleaner. For warranty claims, technical support, or any inquiries regarding your product, please contact JONR customer service through the official webwebu nebo kontaktních informací uvedených v nákupní dokumentaci.

Uschovejte si prosím doklad o koupi pro účely záruky.