VGR V-879T Professional Hair Clipper User Manual

1. Úvod

Thank you for choosing the VGR V-879T Professional Hair Clipper. This high-performance grooming tool is designed for both professional salon use and home styling, offering precision and efficiency. It features a powerful 7500 RPM motor and an innovative DLC-coated ceramic blade for a smooth, accurate cut while minimizing friction and heat. The ergonomic design includes an eye-catching ornate pattern, available in gold and blue. A convenient LED display shows battery level and operating speed. The 1500mAh lithium battery provides 300 minutes of use after a 2.5-hour charge. This manual provides essential information for safe and effective use of your new hair clipper.

2. Bezpečnostní pokyny

• Před použitím tohoto zařízení si přečtěte všechny pokyny.
• Uchovávejte spotřebič mimo dosah vody. Nepoužívejte jej v blízkosti van, sprch,asinnebo jiné nádoby obsahující vodu.
• Neponořujte spotřebič do vody nebo jiných kapalin.
• Vždy odpojte spotřebič ihned po použití a před čištěním.
• Do not use the appliance if the cord or plug is damaged, or if it is not working properly.
• Udržujte kabel mimo horké povrchy.
• Tento spotřebič není určen pro použití osobami (včetně dětí) se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo nedostatečnými zkušenostmi a znalostmi, pokud na ně nedohlíží osoba odpovědná za jejich bezpečnost nebo jim nebyla poskytnuta instrukce ohledně používání spotřebiče.
• Děti by měly být pod dozorem, aby bylo zajištěno, že si se spotřebičem nebudou hrát.
• Use only attachments supplied by the manufacturer.
• Nepokoušejte se spotřebič opravovat sami. Pro opravu se obraťte na kvalifikovaný servisní personál.

3. Obsah balení

The VGR V-879T Professional Hair Clipper package includes the following items:

• VGR V-879T Hair Clipper
• 4 vodicí hřebeny (3 mm, 5 mm, 7 mm, 9 mm)
• Čisticí kartáč
• USB nabíjecí kabel
• Uživatelská příručka

Image: VGR V-879T Hair Clipper (gold variant) with its complete set of accessories, including guide combs, cleaning brush, and USB charging cable.

Image: VGR V-879T Hair Clipper (blue variant) with its complete set of accessories, including guide combs, cleaning brush, and USB charging cable.

4. Vlastnosti produktu

• Výkonný motor: Equipped with a high-performance 7500 RPM motor for efficient and precise cutting.
• Advanced DLC Ceramic Blade: Features a 4cm wide ceramic blade with a Diamond-Like Carbon (DLC) coating for ultra-sharp, smooth, and precise cuts, reducing friction and hair pulling.
• Digitální LED displej: An integrated LED screen displays real-time battery percentage, available usage time, and operating speed for convenient monitoring.
• Long-Lasting Lithium Battery: Powered by a 1500mAh lithium battery, providing up to 300 minutes of continuous use with a quick 2.5-hour charging time.
• Ergonomický design: Lightweight (200g) and compact (15cm length) with an anti-slip ornate texture for comfortable handling during extended grooming sessions.
• Všestranné vodicí hřebeny: Includes four guide combs (3mm, 5mm, 7mm, 9mm) for various hair lengths and styling options.

Obrázek: Podrobný view of the VGR V-879T's LED display, indicating battery level and motor speed.

Image: Close-up of the VGR V-879T's handle, highlighting the anti-slip texture and ornate pattern in both blue and gold color options.

Image: Close-up of the VGR V-879T's ceramic and titanium coated blade, designed for precision cutting.

5. Nastavení

5.1 Nabíjení zastřihovače

1. Ensure the clipper is turned off before charging.
2. Connect the USB charging cable to the charging port on the bottom of the clipper.
3. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a USB port on a computer.
4. LED displej zobrazí stav nabíjení. Plné nabití trvá přibližně 2.5 hodiny.
5. Once fully charged, the display will indicate 100%. Disconnect the charger.

Image: Illustration of the VGR V-879T's battery specifications, highlighting its 1500mAh capacity, 2.5-hour charging time, and 300-minute usage time.

5.2 Nasazení vodicích hřebenů

1. Select the desired guide comb (3mm, 5mm, 7mm, or 9mm) for your preferred hair length.
2. Zarovnejte vodicí hřeben s čepelí zastřihovače a pevně jej zatlačte, dokud nezacvakne na místo.
3. Chcete-li hřeben sundat, jemně jej stáhněte z čepele.

6. Návod k obsluze

6.1 Základní obsluha

1. Ensure the clipper is charged and a guide comb is attached if needed.
2. Press the power button to turn on the clipper. The LED display will illuminate, showing battery and speed information.
3. To adjust the speed, press the power button again to cycle through available speed settings (if applicable).
4. Begin cutting hair by moving the clipper against the direction of hair growth.
5. For best results, use slow, even strokes.
6. After use, press and hold the power button to turn off the clipper.

6.2 Hair Cutting Tips

• For an even cut, ensure hair is clean and dry before clipping.
• Always start with a longer guide comb and gradually switch to shorter ones if a closer cut is desired.
• Comb hair frequently during the cutting process to remove loose hairs and check for evenness.
• Pro detailní úpravu nebo konturování odstraňte vodicí hřeben a opatrně používejte holou čepel.

7. Údržba a čištění

7.1 Čištění nožů

1. Vypněte a odpojte zastřihovač ze zásuvky.
2. Odstraňte veškerý připojený vodicí hřeben.
3. Use the provided cleaning brush to brush away loose hairs from the blades and the clipper body.
4. For a more thorough cleaning, the blades can be carefully detached (refer to specific instructions if provided with your model for blade removal). Rinse detached blades under running water and ensure they are completely dry before reattaching. Do not rinse the clipper body.

7.2 Mazání nožů

1. After cleaning, apply a few drops of clipper oil (not included, but commonly available) to the blades.
2. Turn on the clipper for a few seconds to allow the oil to distribute evenly across the blades.
3. Wipe off any excess oil with a soft cloth. Regular oiling helps maintain blade sharpness and prolongs the life of the clipper.

8. Řešení problémů

9. Specifikace

Image: Visual representation of the VGR V-879T's dimensions and weight.

10. Záruka a podpora

Specific warranty information for the VGR V-879T Professional Hair Clipper is not provided in the product details. Please refer to the retailer or manufacturer's website for detailed warranty terms and conditions. For technical support or service inquiries, please contact the customer service department of your place of purchase.