Madesa Dining Chair Set 4292 MC Instruction Manual

1. Úvod

Thank you for choosing the Madesa Dining Chair Set 4292 MC. This set includes four high-quality dining chairs designed for comfort and durability. This manual provides detailed instructions for assembly, proper use, and maintenance to ensure the longevity of your furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: Four Madesa dining chairs, showcasinkompletní sadu.

2. Bezpečnostní informace

• Před montáží se ujistěte, že jsou všechny díly přítomny a nepoškozené. Nepoužívejte poškozené díly.
• Židle sestavujte na měkkém a čistém povrchu, abyste zabránili poškrábání.
• Tighten all screws and bolts securely, but do not overtighten. Periodically check and retighten fasteners as needed.
• Nestůjte na židlích ani je nepoužívejte jako schůdky.
• Uchovávejte malé díly a obalové materiály mimo dosah dětí.

3. Obsah balení

Before assembly, verify that all components are included in your package:

• Chair Frames (4 units)
• Seat Cushions (4 units)
• Backrests (4 units)
• Sada montážního hardwaru (šrouby, matice, imbusový klíč atd.)
• Návod k použití

4. Montážní návod

Assembly is required for this dining chair set. Follow these steps carefully:

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu. Položte je na čistý, měkký povrch, aby nedošlo k jejich poškození.
2. Identifikujte díly: Refer to the included hardware diagram (if applicable) to identify all screws, bolts, and chair components.
3. Attach Backrest to Rear Legs: Secure the backrest to the two rear chair legs using the provided screws and an Allen wrench. Do not fully tighten yet.
4. Připevnění předních nohou: Connect the two front chair legs to the seat frame using the appropriate hardware.
5. Connect Seat Frame: Attach the seat frame to the assembled backrest and front legs. Ensure all connections are aligned.
6. Instalace sedáku: Place the seat cushion onto the seat frame and secure it with the designated screws from underneath.
7. Konečné utažení: Once all parts are loosely assembled, place the chair on a flat surface. Apply gentle pressure to ensure it sits evenly, then fully tighten all screws and bolts.
8. Opakujte pro zbývající židle: Stejným způsobem postupujte u ostatních tří židlí.

Image: Detail of the high-quality hardware used for assembly.

Image: Additional view of the assembly hardware and connection points.

5. Návod k obsluze (Použití)

The Madesa Dining Chairs are designed for indoor use as seating furniture. To ensure proper use and longevity:

• Use the chairs on a flat, stable surface.
• Avoid dragging the chairs across the floor; lift them when moving to prevent damage to legs and flooring.
• Do not expose the chairs to excessive moisture or direct sunlight for prolonged periods, as this may affect the wood and finish.

6. Údržba

Regular maintenance will help preserve the appearance and structural integrity of your Madesa dining chairs:

• Čištění: Otřete povrchy měkkým, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the polyester paint finish.
• Rozlití: Clean spills immediately with a dry cloth to prevent staining.
• Spojovací materiál: Periodically check all screws and bolts and tighten them if they have loosened over time.
• Ochrana: Use felt pads under the chair legs to protect your flooring.

Image: Detail showing the high-resistance polyester paint finish on the chair frame.

7. Řešení problémů

• Vratné křeslo: If a chair feels unstable, loosen all assembly screws slightly, sit on the chair to settle the frame, then retighten all screws firmly while the chair is on a flat surface.
• Uvolněné šrouby: Pravidelně kontrolujte a utahujte všechny šrouby a matice, abyste zachovali stabilitu.
• Škrábance/promáčkliny: Minor scratches on the wood can sometimes be touched up with a furniture repair marker matching the wood tone.

8. Specifikace

Image: A single chair displaying its height (89cm), depth (44cm), and width (37cm).

9. Záruka a podpora

Záruka výrobce: Madesa products are manufactured with quality and durability in mind. For specific warranty details, please refer to the documentation included with your purchase or contact Madesa customer support.

Vrácení: This product is eligible for a 30-day free return period from the date of purchase. Please refer to the retailer's return policy for full details.

Plány rozšířené ochrany: Extended warranty options may be available through third-party providers such as Assurant. These plans offer additional coverage beyond the manufacturer's warranty for 2, 3, or 4 years. Please consult the retailer for details on purchasintyto plány.

Zákaznická podpora: For assistance with assembly, missing parts, or any other inquiries, please contact Madesa customer service through their official channels or the retailer where the product was purchased.