ZY-CC100DC12/24v-c3/C2 Dzl35 Car Refrigerator Compressor Driver Module Instruction Manual

1. Úvod

This manual provides essential information for the proper installation, operation, and maintenance of the ZY-CC100DC12/24v-c3/C2 Dzl35 Car Refrigerator Compressor Driver Module. This module is designed to control and drive compressors in vehicle cooling systems, offering features such as speed regulation, adaptation, and comprehensive protection. Please read this manual thoroughly before installation and use.

2. Bezpečnostní informace

• Elektrická bezpečnost: Ensure all power connections are secure and correctly polarized. Disconnect power before performing any installation or maintenance.
• svtage Kompatibilita: This module operates with DC 12V/24V systems. Verify your vehicle's electrical system voltage před připojením.
• Profesionální instalace: Installation should be performed by qualified personnel to prevent damage to the module or the vehicle's electrical system.
• Podmínky prostředí: Avoid exposing the module to extreme temperatures, moisture, or corrosive environments.

3. Konec produktuview a funkce

The ZY-CC100DC12/24v-c3/C2 Dzl35 is a frequency conversion driver module for car refrigerator compressors. Its key functions include:

• Speed Regulation Function: Automatically adjusts the motor speed according to the compressor's operational requirements, enabling precise flow and pressure control.
• Adaptační funkce: Designed for wide compatibility with various compressor brands and models, facilitating easy replacement and upgrades. Users should provide their specific compressor model for optimal adaptation.
• Drive Function: Serves as the central control component, converting electrical energy into mechanical energy to ensure the compressor's normal operation.
• Monitorovací funkce: Provides real-time monitoring of compressor operating status and parameters, including current, voltage, and temperature, aiding in fault diagnosis and performance optimization.
• Ochranná funkce: Incorporates multiple safety features such as overload protection, short circuit protection, and undervoltage protection. These functions ensure the compressor safely shuts down under abnormal conditions, preventing equipment damage.

Obrázek 1: ZY-CC100DC12/24v-c3/C2 Dzl35 Car Refrigerator Compressor Driver Module. This image shows the black, finned heat sink design of the module, with a white connector visible at the bottom right. The fins are designed for heat dissipation, and connection labels are faintly visible on the side.

4. Nastavení a instalace

Proper installation is crucial for the module's performance and longevity. It is highly recommended that installation be performed by a certified technician.

4.1 Kontroly před instalací

• Verify that the vehicle's power supply is DC 12V or DC 24V.
• Ensure the compressor model is compatible with the ZY-CC100DC12/24v-c3/C2 Dzl35 module.
• Před zahájením jakýchkoli elektrických prací odpojte baterii vozidla.

4.2 Pokyny pro zapojení

Connect the module to the compressor and the vehicle's power supply according to the wiring diagram provided with your specific compressor or vehicle cooling system. Pay close attention to polarity (+ and -) and ensure all connections are firm and insulated to prevent short circuits.

• Příkon: Connect to the vehicle's DC 12V or 24V power source.
• Compressor Output: Connect to the compressor's input terminals.
• Řídicí signály: Connect any necessary control signals (e.g., thermostat input) as per your system's requirements.

Secure the module in a location that allows for adequate ventilation, away from direct heat sources and moisture. The finned design aids in heat dissipation, so ensure airflow is not obstructed.

5. Návod k obsluze

Once installed, the module operates automatically to manage the compressor. The frequency conversion technology allows for efficient and precise cooling.

• Počáteční zapnutí: After installation, reconnect the vehicle's battery. The module will perform an initial self-check.
• Automatický provoz: The module will automatically adjust the compressor's speed based on the cooling demand, optimizing energy consumption and maintaining the desired temperature.
• Sledování: The module continuously monitors parameters like current, voltage, and temperature. In case of anomalies, its protection functions will activate.

6. Údržba

The ZY-CC100DC12/24v-c3/C2 Dzl35 module is designed for low maintenance. Regular checks can help ensure optimal performance.

• Vizuální kontrola: Periodically inspect the module and its connections for any signs of damage, corrosion, or loose wiring.
• Čištění: Keep the module's heat sink fins clean and free of dust or debris to ensure efficient heat dissipation. Use a soft, dry cloth for cleaning.
• Integrita připojení: Ujistěte se, že všechna elektrická připojení zůstávají pevná a bezpečná.

7. Řešení problémů

The module includes built-in protection features to prevent damage. If the compressor system is not functioning correctly, consider the following:

• No Compressor Operation:
  • Check power supply: Ensure the module is receiving the correct DC 12V/24V input.
  • Check connections: Verify all wiring to the compressor and power source is secure.
  • Overload/Short Circuit Protection: If the module has activated its protection, disconnect power, inspect the compressor and wiring for faults, and then reconnect.
• Přerušovaný provoz:
  • Podpětítage Protection: Check the vehicle's battery voltage. If it's too low, the module may shut down to protect the system.
  • Overheating: Ensure the module has adequate ventilation and its fins are clean.
• Neobvyklé zvuky: This is typically related to the compressor itself or its mounting, not the driver module.

If issues persist after checking these points, consult a qualified technician or the product supplier.

8. Specifikace

9. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer directly. Keep your purchase receipt as proof of purchase.