Generic Replacement Dishwasher Drain Pump Motor for Kenmore Model 665.13229N414 Instruction Manual

1. Konec produktuview a kompatibilita

This document provides essential instructions for the installation and maintenance of the Generic replacement drain pump motor, model Dishwasherpart#5177199. This part is designed as a compatible replacement for Kenmore dishwasher model 665.13229N414.

Before proceeding with installation, it is crucial to verify that this replacement part is compatible with your specific dishwasher model. Please carefully compare the provided images and model numbers with your original part to ensure a correct fit. Incorrect installation or incompatible parts can lead to damage or improper operation.

2. Bezpečnostní informace

• Odpojit napájení: Always disconnect the dishwasher from its power source before attempting any repair or installation. Failure to do so can result in electric shock or serious injury.
• Vodovod: Turn off the water supply to the dishwasher before beginning work to prevent water leaks.
• Doporučená profesionální instalace: Pokud nemáte zkušenosti s opravami spotřebičů, důrazně doporučujeme vyhledat pomoc kvalifikovaného technika.
• Používejte ochranné pomůcky: Během instalace používejte vhodné osobní ochranné prostředky, jako jsou rukavice a ochrana očí.
• Ostré hrany: Be aware of potential sharp edges or components within the dishwasher.

3. Obsah balení

Balíček obsahuje:

• 1 x Generic Replacement Dishwasher Drain Pump Motor (Model: Dishwasherpart#5177199)

Note: Only one unit is included per package.

4. Pokyny k instalaci

Replacing a dishwasher drain pump motor requires careful attention. The following steps are general guidelines. Always refer to your specific dishwasher's service manual for detailed instructions.

1. Příprava myčky nádobí: Ensure the dishwasher is completely disconnected from power and water supply. Pull the dishwasher out from its cabinet enclosure to access the underside.
2. Vyhledejte vypouštěcí čerpadlo: The drain pump is typically located at the bottom of the dishwasher, often near the motor assembly. It is usually secured by clamps nebo šrouby.
3. Vypusťte zbytkovou vodu: Place towels or a shallow pan underneath the pump area to catch any residual water that may spill when disconnecting hoses.
4. Odpojení kabeláže a hadic: Carefully disconnect the electrical wiring harness from the pump motor. Then, loosen the clamps and remove the drain hoses connected to the pump.
5. Demontáž starého čerpadla: Unfasten any mounting screws or release the locking tabs that secure the old drain pump to the dishwasher sump. Remove the old pump.
6. Instalace nového čerpadla: Position the new Generic replacement drain pump motor (Dishwasherpart#5177199) in the same location as the old one. Secure it with the mounting screws or locking tabs.
7. Znovu připojte hadice a kabeláž: Reattach the drain hoses to the new pump, ensuring clamps are tightened securely to prevent leaks. Connect the electrical wiring harness to the new pump motor.
8. Zkouška těsnosti a funkčnosti: Carefully slide the dishwasher back into its enclosure. Reconnect the water supply and power. Run a short cycle and visually inspect for any leaks around the pump and hose connections. Listen for proper pump operation.

Image 1: Generic Replacement Dishwasher Drain Pump Motor (Model Dishwasherpart#5177199). This image shows the drain pump motor assembly, featuring a gray housing, a white central body, and a yellow impeller visible at the front. The electrical connection points are visible at the bottom.

5. Návod k obsluze

Once correctly installed, the Generic replacement drain pump motor operates automatically as part of your dishwasher's normal wash and drain cycles. No manual intervention is required for its operation. The pump will activate to remove water from the dishwasher tub at the appropriate stagčásti cyklu.

6. Údržba

To ensure the longevity and efficient operation of your dishwasher's drain pump, consider the following general maintenance tips:

• Čištění filtru myčky nádobí: Regularly clean the dishwasher's filter to prevent food particles and debris from reaching and potentially clogging the drain pump.
• Scrape Plates: Scrape large food particles off plates before loading them into the dishwasher.
• Zkontrolujte překážky: If you notice draining issues, inspect the drain hose and the area around the pump impeller for any foreign objects. Always disconnect power before inspecting.

7. Řešení problémů

If your dishwasher is experiencing draining issues after installing the new pump, consider these common troubleshooting steps:

• Myčka nádobí nevypouští vodu:
  • Verify that the drain hose is not kinked or obstructed.
  • Check the dishwasher's air gap (if applicable) for clogs.
  • Ensure the electrical connection to the pump is secure.
  • Inspect the pump impeller for any debris that might be preventing it from spinning.
• Unusual Noises During Draining:
  • This could indicate a foreign object caught in the pump impeller. Disconnect power and carefully inspect the pump.
  • Ujistěte se, že je čerpadlo bezpečně namontováno a nevibruje vůči ostatním součástem.
• Leaks Around Pump:
  • Zkontrolujte těsnost všech hadicových spojů.
  • Ensure the pump's mounting to the sump is sealed correctly.

Pokud kroky pro řešení potíží problém nevyřeší, doporučuje se kontaktovat kvalifikovaného technika pro opravu spotřebičů.

8. Specifikace produktu

9. Záruka a podpora

For information regarding warranty coverage or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Ensure you have your purchase details and the product model number (Dishwasherpart#5177199) available when seeking support.