Okin Overbed Bedside Table with Wheels

1. Úvod

This manual provides instructions for the assembly, operation, and maintenance of your Okin Overbed Bedside Table with Wheels, Model OKPM50502716WAS. This versatile table is designed for various uses, including reading, writing, eating, or using a laptop, and features adjustable height and a tilting desktop for ergonomic comfort.

Image 1.1: The Okin Overbed Table is suitable for various scenarios, including use over a bed, next to a couch, or with a chair.

2. Bezpečnostní informace

• Maximální nosnost: Nepřekračujte maximální statickou nosnost 22 lb (10 kg) na ploše. Přetížení může způsobit nestabilitu a poškození.
• Stabilita: Ensure the table is placed on a flat, stable surface. Lock the wheels when the table is in a stationary position to prevent unintended movement.
• Tilting Section: When the desktop is tilted, ensure items placed on it are secure and will not slide off. Avoid placing heavy or fragile items on the tilting section when it is not flat.
• kapaliny: Exercise caution when placing beverages on the table, especially near electronic devices. Use the integrated cup holder for added security.
• Shromáždění: Pečlivě dodržujte všechny montážní pokyny. Před použitím se ujistěte, že jsou všechny šrouby a upevňovací prvky bezpečně utaženy.
• Děti: Keep children away from the table during assembly and adjustment to prevent injury.

Image 2.1: The H-base design provides stability, supporting up to 22 lbs (10 kg) of weight. Always adhere to the maximum load capacity.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou přítomny všechny součásti. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

• Desktop with tilting mechanism and cup holder
• Main Support Column (with pneumatic lifting system)
• Základový rám
• Hidden Wheels (pre-installed or to be installed)
• Průvodce montáží
• Installation Tool (Hex key/Wrench)

4. Montážní návod

Montáž obvykle trvá přibližně 15 minut. Pečlivě postupujte podle těchto kroků:

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a položte je na čistý, měkký povrch, abyste zabránili poškrábání.
2. Attach Main Support Column to Base: Secure the main support column to the base frame using the provided screws and installation tool. Ensure it is firmly attached.
3. Attach Desktop to Main Support Column: Connect the desktop assembly to the top of the main support column. Align the mounting points and secure with the provided fasteners.
4. Kontrola stability: Po sestavení jemně zatřeste stolem, abyste se ujistili, že jsou všechna spojení bezpečná a stůl stabilní.

Image 4.1: Visual guide illustrating the quick installation process, typically completed within 15 minutes.

Obrázek 4.2: Rozložený view of the table components, demonstrating how they fit together for assembly.

5. Návod k obsluze

5.1. Nastavení výšky

The table features a gas spring pneumatic lifting system for smooth and quiet height adjustment. To adjust the height:

1. Locate the height adjustment lever, typically found under the desktop.
2. Stiskněte a podržte páku.
3. Gently raise or lower the desktop to your desired height (range: 29.7 to 43.3 inches).
4. Release the lever to lock the desktop in place.

Image 5.1: The pneumatic lift system allows for easy and smooth height adjustments, accommodating both sitting and standing postures.

5.2. Desktop Tilt Function

The desktop is designed with a split surface: a larger section that tilts and a smaller fixed section with a cup holder. The tilting section can be adjusted from 0° to 70°.

1. To tilt the desktop, locate the adjustment mechanism (usually a lever or knob) underneath the tilting section.
2. Engage the mechanism to unlock the tilt.
3. Adjust the tilting section to your desired angle. An anti-slip edge is present to prevent items from sliding off.
4. Release the mechanism to lock the tilt in place.
5. The smaller, fixed section remains flat, providing a stable surface for drinks or other items.

Image 5.2: The desktop can be tilted to various angles (0-70 degrees) for comfortable reading or laptop use, with a fixed section for beverages.

Image 5.3: The table features a movable desktop that tilts and a fixed desktop section to keep items steady and secure.

5.3. Mobilita

The table is equipped with hidden wheels for easy movement. The low-profile base (1.57 inches high) allows it to slide under most beds and furniture.

1. To move the table, ensure the wheels are unlocked (if applicable).
2. Gently push or pull the table to its desired location.
3. Once positioned, lock the wheels to prevent accidental movement.

Image 5.4: The table features hidden casters for smooth movement, allowing it to easily slide under furniture.

6. Údržba

• Čištění: Wipe the tabletop and frame with a dry cloth. For stubborn marks, a slightly damp Lze použít hadřík a ihned osušit. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a upevňovací prvky, zda jsou pevně utažené. V případě potřeby je dotáhněte pro zachování stability.
• Péče o kola: Keep the wheels free of dust and debris to ensure smooth movement.

7. Řešení problémů

• Vrácení stolu:
  Řešení: Ensure all assembly screws are securely tightened. Verify the table is on a level surface.
• Obtížnost nastavení výšky:
  Řešení: Check if the height adjustment lever is fully engaged or disengaged. Ensure there are no obstructions in the pneumatic lifting mechanism.
• Plocha se nenaklání plynule:
  Řešení: Inspect the tilting mechanism for any obstructions or debris. Ensure the locking mechanism is fully disengaged before attempting to tilt.
• Kola se netočí:
  Řešení: Check if the wheels are locked. Clean any hair or debris that may be caught in the wheel casters.

8. Specifikace

Image 8.1: Detailed dimensions and weight capacity of the Okin Overbed Table.

9. Záruka a podpora

Okin is committed to customer satisfaction. While specific warranty details are not provided in this manual, we offer 24-hour customer service for any pre- or post-purchase issues.

For assistance, please contact us via the Amazon Message Center. Your satisfaction is our priority.