1. Úvod
This manual provides essential information for the safe and efficient use of your DATOUBOSS 12V 100Ah LiFePO4 Battery Group 24. Please read this manual thoroughly before installation and operation to ensure proper handling and to maximize the battery's lifespan and performance.

Image 1.1: DATOUBOSS 12V 100Ah LiFePO4 Battery with integrated safety features, including 4000+ cycles, 10+ years lifespan, and 100A BMS protection.
2. Bezpečnostní informace
Adherence to the following safety guidelines is crucial to prevent injury, damage to the battery, and ensure long-term performance.
- Nezaměňujte kladný a záporný pól baterie.
- Avoid hitting or throwing objects at the battery, or stepping on it.
- Do not use metal to directly connect the positive and negative terminals of the battery.
- Do not weld the battery directly or pierce it with nails or other sharp objects.
- Do not immerse the battery in seawater or water.
- This battery is not designed for use as a car starter battery, trip starter battery, or engine starter battery.
- Avoid using the battery at high temperatures, as this may lead to overheating, fire, or premature failure, shortening its service life.

Image 2.1: Visual representation of critical safety warnings for the LiFePO4 battery.
3. Vlastnosti produktu
The DATOUBOSS 12V 100Ah LiFePO4 Battery offers advanced features for reliable power solutions:
- Integrovaná ochrana BMS: Features a built-in 100A Battery Management System (BMS) for protection against short-circuits, over-voltage, over-heating, and over-charging.
- Prodloužená životnost: Designed for 4,000 to 15,000 deep cycles, providing a service life of up to 10 years.
- Teplotní odolnost: Operates effectively across a wide temperature range, from -4°F to 150°F, ensuring performance in various environments.
- Vysoká hustota energie: Offers higher energy density compared to traditional lead-acid batteries.
- Lehký design: Significantly lighter than comparable lead-acid batteries, enhancing portability and ease of installation.

Image 3.1: The battery's ability to adapt to extreme temperatures, from -4°F (low) to 150°F (high).

Image 3.2: Illustration of the battery's capacity to power common RV appliances like fans, refrigerators, coffee makers, and microwaves for extended durations.
4. Nastavení
4.1 Prvotní kontrola
Upon receiving your battery, inspect it for any visible damage. Ensure all terminals are secure. If any damage is found, contact customer support immediately.
4.2 Pokyny pro připojení
The DATOUBOSS 12V 100Ah LiFePO4 battery supports both series and parallel connections for increased capacity and voltage. Always ensure all batteries in a series or parallel bank are of the same model and capacity.
- Paralelní připojení: Pro zvýšení celkového výkonu spojte kladné a záporné svorky amperage (Ah) while maintaining 12V.
- Sériové připojení: Pro zvýšení celkového objemu připojte kladný pól jedné baterie k zápornému pólu další.tage (V). For example, two 12V batteries in series create a 24V system.
- Maximum Configuration: The battery supports configurations up to 4 series and 4 parallel (4S4P), allowing for a maximum continuous charge/discharge current of 400A and a maximum load power of 20.48 kW.

Image 4.1: Diagram illustrating how to connect multiple batteries in series and parallel for flexible capacity expansion in a solar power system.
5. Návod k obsluze
5.1 Nabíjení baterie
Baterii DATOUBOSS LiFePO4 lze nabíjet různými způsoby:
- Solární panel: Connect to a compatible solar charge controller (MPPT recommended) and solar panels.
- Nabíječka LiFePO4 baterií: Use a dedicated LiFePO4 battery charger. Ensure the charger's voltage and current settings are appropriate for a 12V LiFePO4 battery.
- Generátor: Connect to a generator with a suitable charging output.

Image 5.1: Visual guide to the three primary charging methods for the LiFePO4 battery.
5.2 Aplikace
Tato baterie je vhodná pro širokou škálu aplikací, včetně:
- Rekreační vozidla (RV)
- Camping and Outdoor Power
- Solar Power Systems (Off-Grid and Home Storage)
- Marine Applications (Boats, Trolling Motors, Fish Finders)
- Záložní napájecí systémy
- Power Carts and Kayaks

Obrázek 5.2: Příkladamples of diverse applications where the LiFePO4 battery can be utilized.
6. Údržba
LiFePO4 baterie vyžadují ve srovnání s olověnými bateriemi minimální údržbu. Pro optimální výkon dodržujte tyto pokyny:
- Pravidelná kontrola: Periodically check battery terminals for corrosion or loose connections. Clean terminals with a wire brush if necessary and ensure they are tightened.
- Skladování: Pokud baterii skladujete delší dobu, ujistěte se, že je nabita přibližně na 50 % stavu nabití (SOC) a uložena na chladném a suchém místě. Neskladujte ji na přímém slunečním světle nebo v extrémních teplotách.
- Čištění: Uchovávejte baterii casing clean and free of dust and debris. Use a dry cloth for cleaning. Do not use solvents or harsh chemicals.
- Vyhněte se hlubokému vybití: While LiFePO4 batteries tolerate deep discharge, it is recommended to avoid consistently discharging below 20% to prolong overall lifespan.
7. Řešení problémů
Pokud narazíte na problémy s baterií DATOUBOSS LiFePO4, zvažte následující běžné kroky pro řešení problémů:
- Baterie se nenabíjí:
- Verify that the charger is compatible with LiFePO4 batteries and is properly connected.
- Check all cable connections for looseness or corrosion.
- Ensure the charging temperature is within the recommended range (typically above 32°F / 0°C). The built-in BMS includes low-temperature protection to prevent charging below 0°C.
- Žádný výkon:
- Zkontrolujte, zda je baterie dostatečně nabitá.
- Inspect all connections to the load for proper contact.
- The BMS may have activated a protection mode (e.g., over-discharge, over-current). Disconnect the load, wait a few minutes, and attempt to reconnect.
- Reduced Capacity:
- Ensure the battery has been fully charged and discharged a few times to allow the BMS to balance the cells.
- Verify that the load is not exceeding the battery's continuous discharge current rating.
If these steps do not resolve the issue, please contact DATOUBOSS customer support.
8. Specifikace
| Specifikace | Hodnota |
|---|---|
| Značka | DATOUBOSS |
| Číslo modelu | DT-12V100AH |
| svtage | 12.8 V (DC) |
| Kapacita | 100Ah |
| Typ baterie | LiFePO4 (lithium-železo fosfát) |
| BMS | Built-in 100A BMS with Low-Temp Protection |
| Život cyklu | 4000-15000 cyklů |
| Očekávaná životnost | Až 10 let |
| Series/Parallel Support | Up to 4S4P (4 series, 4 parallel) |
| Max. Trvalý nabíjecí/vybíjecí proud | 400A (in 4S4P configuration) |
| Max. Napájení zátěže | 20.48 kW (in 4S4P configuration) |
| Certifikace | UL2054 Safety Certified |
| Zahrnuté komponenty | 12V 100Ah LiFePO4 lithiová baterie |
9. Záruka a podpora
9.1 Informace o záruce
The DATOUBOSS 12V 100Ah LiFePO4 Battery comes with a 5-letá zárukaTato záruka se vztahuje na vady materiálu a zpracování za běžných podmínek používání a servisu.
9.2 Zákaznická podpora
V případě jakýchkoli dotazů, technické pomoci nebo reklamací se prosím obraťte na náš tým zákaznické podpory:
- Online služba: 24-hour online support is available to answer your inquiries promptly.
- Technické pokyny: Our professional technical support team provides timely and efficient guidance for problem resolution.
Even if an item is marked as 'not returnable' on the platform, please reach out to us directly for assistance with defects, damage, or usage concerns. We are committed to providing solutions, including free return and replacement services to ensure your satisfaction.